2017 Mazda Mazda3 Sport Hatchback 4d on 2040-cars

Auto blog

2014 Mazda6 to start at $20,880*

We got our very first taste of the impressive 2014 Mazda6 back in October, and had more than a few good things to say about the midsizer. One piece of information that was conspicuous by its absence, however, was a sticker price.
Now, with zero pomp and circumstance (not even a press release as of this writing), Mazda has dropped what looks to be official pricing for the 6 on its consumer website.
$20,880 is the asking price for the base Mazda6 Sport with a manual transmission (plus $795 worth of destination charges, for a total of $21,675). Alaska residents will need to cough up $840 for destination. The loaded-up Mazda6 Grand Touring shown on the site will set you back a total of $30,290 (MSRP of $29,495), but it isn't clear if that's the starting price of the Grand Touring trim. Mazda is taking orders for the new 6 right now, and the cars will be available on January 2, 2013.

Mazda Slovakia brochure reveals Skyactiv-X Euro power numbers

After driving a prototype of Mazda's Skyactiv-X engine in a Mazda3 in January last year, we wrote, "If you want to talk numbers, they're understandably fuzzy. The Skyactiv-X tune isn't final yet, so horsepower and torque figures are a moving target." They're no longer fuzzy in Slovakia, where a brochure for the new Mazda3 sells final figures as 181 metric horsepower and 222 Newton-meters, or 178 horsepower and 164 pound-feet. We don't know the Slovakian engine's displacement. If that Skyactiv-X is a 2.0-liter, it compares to our 2.0-liter Skyactive-G in the Mazda3 that makes 155 hp and 150 lb-ft, or the tuned Skyactiv-G in the 2019 Miata that makes 181 hp and 151 lb-ft. According to the spec sheet on the Slovakian Mazda site, their 2.0-liter Skyactiv-G in the CX-3 makes 148 hp and 152 lb-ft, and in their Mazda6 makes 162 hp and 155 lb-ft. According to the brochure, those numbers will rise to 164 hp and 157 lb-ft in the coming Mazda3. The Skyactiv-X numbers are in sight of what reps at Mazda in California gave us for output during our drive, which was closer to 190 hp and 180 lb-ft. Mazda said at the L.A. Auto Show last year that the Skyactiv-X would launch in markets with stricter emissions regulations first, so a small European market with tighter controls doesn't define what we get. Given our less restrictive environment, tuning for more power shouldn't be a moon shot. Doing so would put the Skyactiv-X in with the optional 2.5-liter four-cylinder in the U.S. Mazda3, which makes 184 hp and 185 lb-ft. The real test will be gas mileage; the purpose of the Skyactiv-X is to provide those figures in company with 20 to 30 percent better fuel economy than the Skyactiv-G. Autoweek characterized Mazda CEO Akira Marumoto's comments on the engine as, "The Skyactiv-X variant will be positioned as the higher grade. It will have the driving dynamics of the 2.5-liter gasoline setup but the fuel economy of a 1.5-liter diesel." We have questions about this strategy, but we'll have to see how the pricing works out. Since the 2.5-liter serves as the base engine on the 2019 Mazda3, buyers can expect a meaningful premium to get into a Skyactiv-X. Right now, there's a $1,495 surcharge to go from the current 2.0-liter Mazda3 hatch to the 2.5-liter.

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.