2010 Lexus Is250 C Convertible 2-door 2.5l on 2040-cars

Auto blog

Toyota settles first wrongful death suit related to unintended acceleration

Toyota's sales seem to have rebounded from the unintended acceleration issues from 2009 and 2010, but the automaker is far from done dealing with this situation. Following a settlement worth up to $1.4 billion for economic loss to affected vehicle owners, Toyota has settled rather than going to trial in a wrongful death lawsuit stemming from an accident in Utah in 2010 that left two passengers dead. This isn't the first case in which Toyota has settled, but it was the first among a consolidated group of cases being held in Santa Ana, CA.
According to The Detroit News, this case was scheduled to take place next month, and it was for a November 2010 incident in which Paul Van Alfen and Charlene James Lloyd were killed in a Camry when, based on findings by the Utah Highway Patrol, the accelerator got stuck causing the car to speed out of control and hit a wall; the terms of the settlement were not announced.
The article says that while Toyota will settle on some cases, it doesn't plan on settling on all of them as it still wants to be able to "defend [its] product at trial." This will probably be the case in suits claiming that software for the drive-by-wire accelerator was the cause of an accident in a Toyota or Lexus vehicle. The question of whether or not the electronic accelerator played any role in this problem has been a hot-button topic since the beginning. Toyota has issued recalls in the past to attempt to prevent unintended acceleration caused by trapped floor mats and faulty accelerator pedals, but it also says driver error was to blame in some instances.

This Lexus hybrid will paint your self-portrait while you drive

To encourage better driving habits, some hybrids use leaves or tree graphics to portray how efficient or inefficiently a driver is, but Lexus has come up with a more unique method of relaying this information. For its Art Is Motion campaign, Lexus has equipped a Lexus IS300h with special software that enables the car to paint a portrait of the driver by combining the skills of generative artist Sergio Albiac with specific inputs from the driver.
A regular photograph is uploaded into the system, but the portrait will vary depending on how the car is driven. Using vehicle speed, engine speed and how often the hybrid system is used, the driver "paints" a self-portrait via the software that has cloned Albaic's creative process, which then shows up on the car's center display screen. If the driver is more cautious and maximizes electric driving, the image will be clear (as shown above), but if the driver accelerates heavily, the picture becomes more abstract. Similarly, slower speeds result in "colder" colors while higher speeds use "virulent" colors - perhaps signifying this type of driving isn't healthy for the environment.
For now, Lexus has only created one Art Is Motion IS300h, and it plans to auction off this car in the future. Lexus released three videos, which are all posted below, to show off this car, but there is no additional information yet about the auction.

Lexus recalls 4,200 NX crossovers due to missing welds

Lexus is recalling about 4,200 units of the 2022 NX due to missing spot-welds. Announced in April 2022, the campaign includes the NX250, the NX350, the NX350h, and the NX450h+, and the Japanese company has asked its dealers to stop selling the vehicles in their inventory. Documents published by the National Highway Traffic Safety Administration (NHTSA) explain that some spot-welds might have been missed during the production process. They're located around the mounting areas for the front shock absorbers. Leaving out these welds can cause some of the other welds and the surrounding panels to weaken or crack over time, which could in turn make it possible for the front shock absorbers to separate from their mounting area. This would increase the risk of a crash by causing the driver to lose control of the vehicle. The recall includes 4,215 examples of the NX, though Lexus estimates that fewer than 1% of those are missing welds. It will begin notifying owners of potentially affected vehicles by mail on June 6, 2022. They'll be asked to take their NX to an authorized dealer so that a mechanic can check for missing welds. Lexus is still developing a solution to the problem. In the meantime, it has asked its dealers to stop selling the NXs potentially affected by the recall that are still in inventories across the nation, though as of writing only 12 units have been identified. Weld-related recalls are mercifully rare but not unheard of. In 2019, Subaru recalled 2,107 new Outback and Legacy models due to faulty welds below the cowl panel, and 293 units of the Ascent were recalled in 2018 because they were missing a series of spot welds on the B-pillar. At the time, the company explained that the 293 crossovers without the proper welds would be destroyed and replaced. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.