2006 Jeep Wrangler on 2040-cars

Auto blog

Jeep Wrangler Scrambler pickup truck spy shots reveal top and lighting details

Several spy shots have come out that give us further insight into the new Jeep Wrangler Scrambler pickup truck. Among them are some photos of a prototype being driven near FCA test facilities. They show that the Wrangler will have LED headlights available similar to those on the SUV model, as well as the new Renegade revealed for Europe. They also show the taillights of the pickup, though they appear to be units from a previous-generation JK Wrangler. They're probably placeholders for the new model's lights. View 22 Photos These photos also include images of the truck's interior. The dashboard is a mash-up of old pieces, including a JK Wrangler dash, and a Chrysler-badged steering wheel. But the important part of these photos is that they show parts of a normal Wrangler SUV roll cage, and latches holding down roof panels. These are evidence that the production model will have a removable roof. Further evidence comes from photos taken by someone from the Jeep aftermarket part company Artec Industries was checking out the factory in Toledo, Ohio. The images were brought to our attention by Jeep Scrambler Forum, and they show an unfinished Wrangler pickup body sitting in the doorway to the painting facility. The photo is below, and it confirms a number of details. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This body has the same style of roll cage as those found on the SUV versions of the Wrangler. Specifically, it looks like a combination of the upright rear cage of the two-door, with the length of the Wrangler Unlimited's cage. In addition to confirming the removable top, the windshield also appears to fold down, too. Beyond the confirmation of the top and windshield features, the rest of the cab looks almost identical to any other 2019 Wrangler Unlimited. The fenders and hood are the same, down to the fender vents, as are the doors. The cab shows that there was clearly room for full-size doors, which would have been welcome from an access perspective, but that would naturally cost more than already developed parts, It also means that any aftermarket doors or door accessories created for the Unlimited will work with the Scrambler. We can also see that there's a small diagonal indent in the cab where part of the rear fender will fit. It also matches up with the line of the rear door.

Dodge and Jeep recalling 895k SUVs for possibility of headliner fires

Dodge and Jeep are announcing recalls of a total of 895,000 Durango and Grand Cherokee models worldwide from the 2011 through 2014 model years. There's a possibility that the wiring in the sun visor can short circuit and cause a fire. It specifically affects vehicles built between January 5, 2010, and December 11, 2013, and there are approximately 651,000 of them in the US, 45,700 in Canada, 23,000 in Mexico and 175,000 outside of North America.
Screws that fasten the sunvisor to the headliner may pierce wires in the visor, if the part has been removed or serviced, potentially causing a fire risk. If the wires short circuit, they could overheat and potentially combust. The automakers report three injuries caused by this defect, and according to the investigation by the National Highway Traffic Safety Administration, "there may be a total of 52 unique fire incidents."
To fix the problem, Dodge and Jeep will inspect the vehicles for suspect wiring, and all of the models, whether damaged or not, will get a new sun visor spacer with a wire guide to stop the possibility of short circuits. According to the automakers' announcement, "this condition is not present in vehicles which have not had the headliner or vanity mirror serviced." They will notify affected owners, and repairs will begin in August.

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums