2014 Jeep Wrangler Unlimited Sport on 2040-cars

Auto blog

2016 Jeep Wrangler recalled over impact sensor wiring

Fiat Chrysler just announced a pair of recalls totaling nearly 311,000 units. The bigger recall affects certain 2016 and 2017 model year Jeep Wranglers. Although, since FCA claims all of the affected 2017s are in the company's hands, really, only 2016 owners should pay attention here. The affected Wranglers suffer from an issue where wiring disconnects from impact sensors in certain types of crashes, potentially preventing the airbags and pretensioners from activating. FCA uncovered the problem in what its press release calls "a routine, in-house crash test" and claims "service availability is imminent." The affected Jeeps require a simple rewiring. The other recall, announced Tuesday, is more of a fleet issue, affecting 2007 to 2013 model-year Ram 2500 and 3500 pickups and 3500, 4500, and 5500 chassis cabs and 2011 to 2014 Dodge Charger Pursuit police vehicles. There's a problem with "premature diode wear" in alternators that are subject to "frequent load cycling, at or near maximum amperage, [or] in hot ambient temperatures." Affected alternators could short out, causing a vehicle to stall or potentially catch fire. FCA lists 182,743 affected Wranglers in the US, 18,011 in Canada, 3,087 in Mexico, and 20,948 in global markets. The Ram/ Charger Pursuit recall lists 74,833 vehicles in the US, 10,077 in Canada, 1,088 in Mexico, and 134 outside the NAFTA region. Of all those vehicles, the Jeep recall hasn't caused any injuries or fatalities, while FCA says it's aware of one "potentially related injury" and no accidents due to its fleet vehicle recall. FCA says it will notify owners/operators of affected vehicles when service appointments are available. As per usual, all the work is free of charge. Related Video:

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.

Chrysler's Jefferson North plant builds 5-millionth SUV [w/video]

Chrysler's Jefferson North Assembly Plant opened in 1992 for production of the first Jeep Grand Cherokee, but in the subsequent years, the Detroit plant has gone on to produce some of the company's biggest SUVs including the Jeep Commander and Dodge Durango. Earlier this week, the plant produced its five-millionth SUV, which, fittingly, was a Grand Cherokee.
Celebrating the plant's five-millionth unit, the silver 2014 Grand Cherokee was promptly donated to the USO. In addition to this milestone SUV, Chrysler also had a near-perfect 1993-95 ZJ Grand Cherokee on hand for the photo op. Scroll down for the Chrysler press release as well as a video showing some of the speeches from the celebration.