2011 Jeep Wrangler Unlimited Sahara Lift Navigation Leather on 2040-cars

Auto blog

Watch this 650-hp Hennessey Jeep Grand Cherokee go from 0-60 in 3.9 seconds

Hennessey Performance Engineering has created an HPE650 package for the Jeep Grand Cherokee SRT fitted with the 6.4-liter Hemi engine. When it leaves the showroom floor it has 470 horsepower and gets from 0-60 miles per hour in 4.8 seconds. When it leaves Hennessey's garage floor after the upgrade it has 650 horsepower - 530 hp at the wheels, according to Hennessey - and gets to 60 mph in 3.9 seconds on its way to running the quarter-mile in 12.6 seconds.
There's more than just a Roots-type supercharger bolt-on, with ported cylinder heads and high-flow headers among the many changes made to the engine. You can watch this pre-2014 facelift silver model prove its spec sheet on the drag strip in the video below.

Hands on with the concepts of the Moab Easter Jeep Safari

Jeep has a way of tugging at the heartstrings of its enthusiastic owner base when the annual Moab Easter Jeep Safari rolls around. The 2015 version sees all boxes ticked in the off-road event's 49th year: multiple diesel engines on display, a pickup-truck-like model and more than a few nods to the brand's long and storied history book. We were able to get a first-hand look at the seven concepts being shown in Utah's Red Desert in the much cooler, cleaner confines of the FCA Technical Center's Design Dome. Jeep Chief Concept We aren't sure if it's that throwback chrome grille or the eye-catching Ocean Blue paint, but even more than the Red Rock Responder, the Chief drew our eye as soon as we walked into the Design Dome. It's a surprisingly tall vehicle, but it's also very wide. We'd also wager it's longer than your typical four-door Wrangler. Jeep may have used a Wrangler as a base for the Chief, but any similarities to the donor vehicle are extremely difficult to spot. The fenders and doors are probably the biggest giveaways, but you're going to need to squint (and have the benefit of a Wrangler to compare with, like we did) to pick out Wrangler bits. As is the recurring theme throughout all seven concepts, the Jeep design team's attention to detail is borderline fanatical. From the "Surf Rated" badge on the fenders, to the tweaked door handles to the bumper stickers in the cargo area and the Tiki-statue-shaped shifter, the little details are truly the stars of the Chief Concept. The rosewood trim in the rear cargo area is stunning and adds to the Beach-Boy-friendly stylings of the Chief. The throwback grille, round headlights and tall, skinny taillights, meanwhile, add a lot of personality to the exterior. The high beltline and lower roof gives the Chief a chop-topped look, but it's arguably the least successful element to the blue concept's otherwise impressive design. All of the vehicles Jeep put together for Moab are 100-percent functional. That's not surprising with some of the vehicles you'll see below, but it somehow is remarkably impressive given the degree of the changes Jeep made in putting together the Chief. Jeep Wrangler Red Rock Responder The Wrangler-based Red Rock Responder is arguably one of the most capable of these real-world vehicles, both in terms of the way it looks and its actual hardware. We mentioned the special rescue equipment fitted to the bright-red, truck-like Jeep – a compressor and air gun, sockets, tow straps, etc.

Ford will put solid axles under the Bronco as the off-roading gods intended

We've been wondering what sort of creature the Bronco would be since we first heard of the thing last October, when a union chairman spilled the beans on the SUV and the Ranger pickup. Ford confirmed a 2020 arrival date for the Bronco at the 2017 Detroit Auto Show, but at that point pretty much all we were sure of was that the Ranger and Bronco would be returning. The open question would be how hungry Ford was to spoil the Jeep Wrangler's solo party as a compact(ish) off-roader with dual solid axles, since the easiest thing would be to carry over the suspension design of the presumably related international Ford Ranger and its Everest SUV version: independent front suspension with either a leaf- (Ranger) or coil-suspended (Everest) solid rear axle. Enter Dana, the long-time supplier of Jeep stick axles, to confirm that the 2020 Bronco is getting a pair of them. That means solid axles front and rear, just like under a Wrangler. So reports Automotive News, citing an investor presentation from Dana. All signs so far, such as the report that the Bronco would be engineered by the same team in Australia that created the Ranger pickup, indicated that the Bronco would share a platform with the Ranger and thus be body-on-frame. The solid axle confirmation essentially confirms that theory. Some off-road-capable vehicles have paired solid axles with unibody frames, like the Jeep Cherokee (XJ generation) and Grand Cherokee (ZJ and WJ generations), but they are outliers. Generally, if you've got solid axles at both ends, they're going in a vehicle with a ladder frame. It also lends credence to the notion that our Bronco won't simply be an imported Everest, which might be too understated to stand out from lesser crossovers anyways. This is good news if you have Blue Oval in your blood and pine for a modern SUV that'll show up the Jeep guys on the trail. Less directly, it could mean a wholesale assault on the formula that makes Jeeps successful in the first place: the massive aftermarket of off-roading equipment and dress-up bits that appeal to Jeep buyers almost as much as a Trail Rated badge. At a minimum, Bronco enthusiasts can breathe easy that the reborn SUV won't merely be a light-duty crossover with styling "inspired" by true off-roaders. There's still a lot left to learn about the Bronco. Keep up to date with our running summary of everything we know about the returning off-roader.