2006 Jaguar ..navigation.dvd.supercharged.mint.low Miles on 2040-cars

Auto blog

Jaguar recalls 1,500 XJ sedans over brake issues

A problem with the hydraulic brakes on the flagship XJ sedan has prompted Jaguar to issue a recall. The issue, as publicized by the National Highway Traffic Safety Administration in the notice you can read below, revolves around the brake line junctions underneath the affected vehicles, which may leak fluid, thereby reducing the effectiveness of the braking system. The problem only affects an estimated 1,571 units from the 2014 and 2015 model years, manufactured between February 6 and July 23, 2014. Owners of those affected units are being notified to bring their vehicles in to their local Jaguar dealers to have the brake line junctions inspected and tightened. This issue appears to be unrelated to Jaguar's recent recall of several model lines, the XJ included, over a problem with the power steering system. RECALL Subject : Incorrect Torque of Brake Pipe Unions Report Receipt Date: NOV 19, 2014 NHTSA Campaign Number: 14V741000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 1,571 Manufacturer: Jaguar Land Rover North America, LLC SUMMARY: Jaguar Land Rover North America (Jaguar) is recalling certain model year 2014-2015 Jaguar XJ vehicles manufactured February 6, 2014, to July 23, 2014. In the affected vehicles, the brake line junctions under the vehicle may leak brake fluid. CONSEQUENCE: A brake fluid leak may reduce the vehicle's braking ability, requiring additional distance to stop the vehicle, thereby increasing the risk of a crash. REMEDY: Jaguar will notify owners, and dealers will inspect the brake line junctions, tightening them as necessary, free of charge. The recall is expected to begin on January 16, 2015. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is J048. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Jaguar to go racing with F-Type GT3?

Most British automakers have some manner of racing program. Aston Martin, Lotus and McLaren race as a matter of course. Bentley recently got back into racing, Morgan has dabbled here and there, even Land Rover has its off-road racing programs. The only one, it seems, that isn't racing these days is Jaguar... but that could be about to change. The latest intel from the UK suggests that Jaguar is closely evaluating the prospect of building a GT3-spec racer based on the F-Type. Like the Bentley Continental GT3 co-developed with M-Sport (not to mention Coventry's own successful partnership with TWR), the Jaguar program would need an established racing outfit to help develop the car and field it, and the automaker is said to be evaluating three potential partners. The development of the GT3 racer would allow Jaguar to compete (or sell cars for others to compete) in a variety of racing series around the world, including the Blancpain Endurance Series, the European Le Mans Series and, if properly adapted, other series like the United SportsCar Championship and the 24 Hours of Le Mans. Jaguar's car would have to compete with such rivals as the Aston Martin Vantage GTE, Audi R8 LMS, Ferrari 458 GT, Mercedes-Benz SLS AMG GT3 and Porsche 911 GT3 R. Current FIA GT3 regulations use a Balance of Performance equation that allows for a curb weight between 1,200 and 1,300 kilograms (2,645 to 2,866 pounds) and produce between 500 and 600 horsepower. A more cost-effective GT4 racer could follow. But the best part is that Jaguar could, according to the report in Autocar, develop a road-going version as well, even more focused than the Project 7 pictured above and similar to what Bentley did with the Continental GT3-R. Jaguar of course has had a rich history with motor racing, reaching back to its dominance at Le Mans in the 1950s with the C-Type and D-Type, extending through the TWR partnership in touring car and endurance racing in the 1980s and 90s, to the short-lived Formula One team that became Red Bull Racing. It launched a GT2-spec XKR a few years ago and was tipped to be developing a new LMP1 prototype, but neither are on the track today, where Jaguars only compete in vintage racing. Featured Gallery Jaguar F-Type Project 7 View 29 Photos News Source: Autocar Motorsports Jaguar Racing Vehicles gt3

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.