Well Sorted Longtime Ownership Xke Roadster on 2040-cars

Auto blog

Watch Jaguar build its XJR Rapid Response Vehicle for Bloodhound SSC

Last month, Jaguar revealed an F-Type specially equipped to serve as a Rapid Response Vehicle for the Bloodhound SSC. Now it's rolled out a pair of XJRs kitted out for the same purpose. Set to debut when test pilot Andy Green drives one up the hill at Goodwood later this month, the Jaguar XJR Rapid Response Vehicle has been equipped by Jaguar Land Rover's Special Vehicle Operations division. As you can see, it's got a special livery of blue and orange to mimic the rocket- and jet-powered streamliner's own color scheme, and has been stripped out and fitted with a roll cage and specially crafted tools for the land speed record attempt. Of course, the 5.0-liter supercharged V8 carries over with its 550 horsepower to propel it to 60 in 4.4 seconds and on to a top speed of 174 miles per hour. Alongside the F-Type – which recently undertook a parachute deployment test – the pair of XJR Rapid Response Vehicles will be on hand in South Africa when the Bloodhound attempts to break the land speed record as well as the sound barrier on dry land. Check out the build process in the video. Jaguar Rapid Response Vehicles for Bloodhound SSC to Star at Goodwood Festival of Speed - Bespoke Jaguar XJR Rapid Response Vehicle (RRV) for Bloodhound SSC to make dynamic world debut at Goodwood Festival of Speed - Current world land speed record holder Andy Green to drive the 16MY XJR RRV up the Goodwood hill on Saturday 27 June 2015 - Bloodhound's RRV Fleet now includes two XJRs and an F-TYPE custom-built by Jaguar Land Rover's Special Operations team - Jaguar's history in supporting world land speed records dates back to 1983 with an XJ12 for Richard Noble's record attempt in Thrust 2 Jaguar is to further showcase its commitment as Technical and Innovation Partner to the Bloodhound Project with the world debut of its custom-built XJR Rapid Response Vehicle (RRV) at Goodwood Festival of Speed, alongside the recently unveiled F-TYPE R AWD RRV. One of two XJRs being provided for the record attempts will be on show at the festival and will also take part in the First Glance hill run on Saturday 27 June 2015 with current world land speed record holder and Bloodhound SSC driver Andy Green at the wheel. The two new additions to Bloodhound's fleet are the latest creation of Jaguar Land Rover's Special Vehicle Operations (SVO) division and are wrapped in a bespoke livery created by Jaguar Design incorporating the Bloodhound SSC colours.

Who picks car colors and materials? Designers like Hannah Custance

As automotive journalists, we're often asked "how did you get that job?" People usually didn't even know you could do such a thing. In this 7 Questions series, we're highlighting other jobs in the automotive industry that you might not have heard about before. What do they do, how'd they get to do it and other questions about their particular corner of the car world. Slowly but surely, the automotive landscape is becoming more colorful. Look beyond the unrelentingly conservative palette of white, black and gray most buyers opt for and you'll see the increased use of exterior trim types beyond the usual chrome. There's gloss black, of course, but also other metallic finishes like gold or copper. Those can be found inside, too, where there's also an increase in colorful leathers and trims, innovative fabrics, new wood types and finishes, and greater creativity in general. So where is this change coming from? The answer is designers like Hannah Custance, the color and materials design manager for Jaguar Land Rover. Her team's latest effort is also its magnum opus, the 2022 Range Rover. Although saddled with the expectations that comes with one of the automotive industry's classic nameplates, the all-new Range Rover is also a celebration of cutting edge manufacturing and fashion-forward materials selection. We sat down with Hannah at the L.A. Auto Show to find out more about color and materials designers, how she ended up in the industry, and advice she might have for young designers out there. It has been condensed for brevity. Autoblog: What does a color and materials design manager to do?Hannah Custance: I basically look after a team of designers who design finishes for every A surface on the car. So, that could be exterior finishes. It could be interior trim materials, soft materials, hard materials, chromes, metals, woods, ceramic – that's one of the new ones – anything you can kind of touch and see is color material design. Autoblog: How early in the design process does your team become involved.Hannah: Right at the very start. In fact, we look at materials that don't have a product assigned to them or a car assigned to them. So, it takes actually a very long time for us to get materials approved and fully validated. We have to find suppliers that are willing to work in automotive and our test standards are incredibly high, some of the highest in the industry.

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.