2023 Infiniti Qx80 Premium Select Awd on 2040-cars

Auto blog

Infiniti-Red Bull Racing will seek a fourth title with the RB9 [w/video]

This is the car and the team that everyone wants to dethrone. The stability of this year's regulations means that the Infiniti Red Bull RB9 is a seriously honed RB8; however, that's a situation probably no other team would complain about seeing that the RB8 recovered from early stumbles and reliability issues last year to carry Sebastian Vettel to a third consecutive driver's title and the team to a third consecutive constructor's trophy.
The most noteworthy revisions to the car are the partial vanity panel that omits the driver cooling slot, the even narrower rear end - a feature of just about every car launched so far - and purple sidepods to showcase new title sponsor Infiniti. Adrian Newey, perhaps the most feared designer on the pit lane, said the nose and front wing could be changed relatively easily throughout the season, but he wanted to make sure to get the middle of the car - everything from the sidepods, back - as good as possible since they're more difficult to re-engineer. His track record leads us to believe he did just that.
Below are two videos, one of the making of the RB9, the other the launch at team headquarters in Milton Keynes.

Infiniti Q50 steer-by-wire system took 10 years to develop [w/video]

Infiniti's Direct Adaptive Steering (DAS) is quite a novelty - the system employs no physical connection between the steering wheel and the front wheels under normal circumstances and instead relies on a computer, clutch and steering-angle actuator to guide vehicles down the road with input from the driver.
In our First Drive review of a 2014 Infiniti Q50 equipped with the system, we weren't overly impressed by the artificial feedback. But we can't help but be impressed with how long Infiniti spent on its development: a full 10 years, according to Autoline Daily in the video report below. A staggering 70 percent of the research and development time spent on DAS was devoted to getting the steering feel right, and unfortunately, our first impression suggests their results still leave something to be desired, as we found it lacked the sporty feeling a sport sedan should have.
The weight of DAS is comparable to that of a conventional steering system due to its complexity. For example, three ECUs are used in the first-generation DAS system to ensure there's never a loss of steering, but Infiniti is refining the technology and is working to simplify it to reduce weight. One day Infiniti hopes that only one ECU will be needed to control DAS. We just hope it doesn't take the Japanese automaker another ten years to get the steering feel right.

Infiniti Formula One-inspired Q60 Project Black S has been canned

Infiniti gave enthusiasts a preview of what a high-performance hybrid coupe equipped with Formula One-derived technology could look like when it released the Q60-based Black S concept in 2017. While executives hinted the 563-horsepower model could reach production sooner rather than later, the company confirmed it's been axed. Industry trade journal Automotive News learned the concept was consigned to the automotive attic from an Infiniti spokesman. He pointed out the design study "continues to inspire us," but he didn't explain why the Black S won't reach production. We're not surprised by the decision, though. It was a complex, eye-wateringly expensive version of a slow-selling model unveiled in 2015. Making the numbers add up was likely easier said than done.  Interestingly, many Infiniti dealers didn't want the Black S. "In today's market, a premium Japanese performance coupe has to be very low volume. Anything that Infiniti produces for its dealers, we want it to be a volume product. We're not really in the racing business. I would much rather see something like the QX60. That's a volume vehicle, that's where this company needs to go," opined Ed Lennon, the chairman of the Infiniti National Dealer Advisory Board, in an interview with Automotive News. Unveiled at the 2017 edition of the Geneva auto show, and presented again the following year in Paris, the Black S was powered by a gasoline-electric hybrid drivetrain built around the twin-turbocharged, 3.0-liter V6 that powers the Q60 Red Sport 400. It worked with three motor-generator units similar to the ones found in the Kinetic Energy Recovery System (KERS) fitted to Formula One cars. One spun the rear wheels, and the others were connected to the turbochargers to eliminate lag and deliver instant boost. Infiniti quoted a sub-four-second sprint to 60 mph. Hybrid technology adds weight, and Formula One-like components are no exception. Infiniti noted the drivetrain weighed 441 pounds more than the Red Sport 400's V6. Had it been built, the Black S would have relied extensively on carbon fiber to keep weight in check, and it would have offered a 50/50 weight distribution. Much has changed since 2017, however. Roland Krueger, the former Infiniti CEO who championed the project, left the company in January 2019 to lead Dyson's ill-fated automotive unit. Infiniti announced plans to exit the European market later that year, and it ended its participation in Formula One in 2020.