2001 Honda Cr-v Lx Sport Utility 4-door 2.0l, Leather, 4wd, Sunroof, Manual 5spd on 2040-cars

Auto blog

Glickenhaus's SCG 003 to pack twin-turbo Honda V6?

Scuderia Cameron Glickenhaus has made (or commissioned) two vehicles to date - the P4/5 and the P4/5 Competizione - and is now hard at work on its third. The first was based on the Ferrari Enzo and the second on a Ferrari F430, but the third is being developed independently from the ground up. The question, then, is what engine will it use?
Well now we may have our answer as Jalopnik reports that the SCG 003 (as it's known at the moment) will be powered by a 3.5-liter V6 sourced from Honda, fitted with twin turbochargers and producing in excess of 500 horsepower.
Honda's J35Y engine produces 278 horsepower in the Accord, 290 hp in the Acura MDX and 310 hp in the RLX. It also forms the basis for the HR35TT racing engine which Honda Performance Development puts in its Daytona Prototype, so if the rumors turn out to be true, chances are that's probably the engine in question - with the possible addition of a hybrid electric assist - but we'll have to sit tight to find out for sure.

Honda safety campaign hunting for faulty Takata airbags in junkyards

Honda has been working for months to recall about 5.5 million vehicles to replace their faulty Takata airbag inflators. With many of these models dating back over a decade, some of them aren't on the road anymore; instead they're sitting in salvage yards across the country as a possible source for inexpensive, recycled parts. There's a serious risk for injuries and fatalities if these bad components end up in cars still on the road, and the automaker is on the hunt to track the dangerous parts down. According to Automotive News, Honda thinks there could be over 24,000 recalled Takata airbags in the company's vehicles in junkyards in the US. The automaker has been working with an outside business to find them and issued notices to salvage lots around the country about an offer to buy the parts back. So far, it has tracked down around 3,900 inflators. Bizarrely, Honda is facing pushback on this safety campaign from the Automotive Recyclers Association. "The buyback program appears to be offering recyclers a price for airbags materially lower than the fair parts value," organization CEO Michael Wilson said to Automotive News. Although, under federal law it's illegal to sell faulty components to people. The trade group also has a pending lawsuit against the automaker for alleged lost value in buying vehicles with Takata inflators. In addition to getting the word out to auto recyclers, Honda had a nationwide advertising campaign for people to get their cars fixed. However, the company and Takata are facing many lawsuits for injuries and deaths related to the faulty inflators.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.