1 Owner Clean Carfax Heated Leather Seats Sunroof Nav 3rd Row Mp3 Dvd Power Gate on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Junkyard Gem: 1990 GMC S-15 Jimmy 4x4

The General sold the GMC-badged version of the first-generation Chevy S-10 Blazer, known as the S-15 Jimmy or just the Jimmy, from the 1982 through 1994 model years. These trucks were based on the small S-10 pickup and sold well (until small trucks were forced to get bigger and less truck-like after the dawn of the Ford Explorer-inspired commuter-truck era), but they have become difficult to find in vehicle graveyards in our current century. Here's a '90 Jimmy 4x4 with red-primer paint job, found in a self-service yard on California's Central Coast last month. GMC shoppers could get the 1990 Jimmy as a rear-wheel-drive truck, but this one has the four-wheel-drive option that allowed Tahoe-bound skiers to skip the chain monkeys on the way to the slopes (the CHP, understanding that California drivers have a 95% mortality rate on snow or ice, requires chains or four-wheel-drive to get over Donner Pass when there's a hint of snow forecast). GM sold so many millions of small-block Chevrolet V8s that it made economic sense to use the same tooling to produce a V6 version. The result was this truck's 4.3-liter V6 that was three-quarters of the good old Chevy 350 (5.7-liter) V8 that powered so many Camaros, Chevelles and Impalas. The 4.3 didn't make smooth power, but it got the job done and held together quite well. This one was rated at 160 horsepower, good enough for the Jimmy 4x4's 3,512-pound curb weight. These days, though, used-truck shoppers insist on at least two tons of heft plus four doors. Some discount lot in Monterey or Salinas couldn't even get $999 for this truck, and so it ended up in the final stop before the cold steel jaws of the crusher. 1990 was the last model year for the two-door-only Jimmy; for 1991, the Jimmy came with a choice of two doors (for devil-may-care types) or four doors (for drop-the-kids-at-school types). I've always liked the look of the instrument panels on the early S-10s and its siblings; even though the designers had to work within strict budgetary limitations, they made the panels look interesting. This truck nearly made it to 170,000 miles before the end. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So powerful with the 4.3 (the regular S-15 pickup still came with a 2.8-liter V6 as base equipment) that it could destroy a TV camera.

GM tells NHTSA pickup truck electronic glitch is 'inconsequential'

General Motors has been enduring some serious problems with recalls recently, and it is hoping to avoid launching another major safety campaign. 200,921 2014 Chevrolet Silverado and GMC Sierra pickups are under the microscope due to a rare problem with their instruments, an issue GM calls calls "inconsequential to motor vehicle safety." The Detroit-based automaker believes that the glitch is so minor that it has filed a petition with the National Highway Traffic Safety Administration asking the government safety watchdog for permission to pass on recalling the vehicles.
The fault at issue can occasionally cause the instrument cluster to reset when drivers use the steering wheel controls to browse songs from an external media device connected to the truck's USB ports. If a song's title information exceeds 2,000 bytes, according to The Detroit News, then the instrument panel can reset, which in turn causes the gauges, shift position indicator and cruise control telltale to turn off briefly. When rebooting, other instrument panel lights may briefly illuminate without their functions actually being activated. GM claims that if this does happen, the instrument display lights go out for about 1.5 seconds and the bulb check lasts a further five seconds. However, this snafu has no actual affect on the truck's operation. The glitch is present in trucks built between January 29, 2013, and October 28, 2013.