Nice 2013 Gmc Sierra Crew Cab 4x4 Z71 Slt, Gray Exterior With Black Interior on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

GM recalling 118K Colorado, Canyon pickups over missing hood latches

General Motors has announced a recall of 118,800 Chevrolet Colorado and GMC Canyon pickup trucks due to the possibility of secondary hood latches not being installed at the time of manufacture. The affected vehicles are from the 2010, 2011 and 2012 model years, all of which were built between November 9, 2009 and August 28, 2012.
According to the official National Highway Traffic Safety Administration report, these trucks fail to "comply with the requirements of Federal Motor Vehicle Safety Standard No. 113, 'Hood Latch System.' The hood may be missing the secondary hood latch." In other words, owners of these trucks could find their vehicles' hoods opening unexpectedly while driving.
The official recall campaign is expected to begin on January 17, 2013. Dealers will inspect the affected pickups and if a secondary hood latch is not present, one will be installed free of charge. Scroll down to read the official NHTSA report.

GM crab walked the Hummer EV truck up and down Woodward this weekend

Sometimes, manufacturers like to show off their fancy new wares at the Woodward Dream Cruise. It’s largely done through static showcases with big displays for the public to gawk at. However, GM did something a little different with its GMC Hummer EV truck this year. Instead of parking it at the Chevy and GM display area, it took to Woodward Avenue itself to show off the Hummer in pre-production form. Not only did GM drive the electric truck on the road in front of thousands, but it crab walked the whole way. This was our first time, and probably most of the publicÂ’s first time seeing the Hummer EV crab mode in person. Judging from the crowdÂ’s reaction (GM got its wish of everybody paying attention), folks are impressed, and maybe a bit confused at the HummerÂ’s sideways movements.  ItÂ’s a strange spectacle to see in person. At first, the truck appears as though itÂ’s sliding sideways on ice in a smooth, graceful slide. ThatÂ’s because even though the wheels are turned, the front of the truck is still pointing dead straight ahead. The GM employee behind the wheel of the prototype appeared to be moving forward at about 5-10 mph — it appears shockingly quick in person for the way this behemoth of a truck presents itself. The tech making it work is rather simple in concept. GM simply took existing rear-wheel steering technology, then amplified and modified it for this type of movement. Whereas most cars with rear-wheel steering max out at around 5 degrees of lock with the rear wheels, this Hummer can turn the wheels up to 10 degrees. Turn the wheel left or right in crab mode, and the Hummer moves diagonally down the street. If you use it for its intended purpose, crab mode is meant to help you navigate the Hummer through trails it might otherwise be too big to fit through using regular steering. In reality, we suspect most folks might use crab mode in the exact same fashion as GM did this past weekend: to impress people. And honestly, we canÂ’t blame them. It was a seriously cool sight to see. Crab mode in action: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.