Denali - 6.6 Duramax Diesel - Navigation - Parking Sensors - Tow - Rear Camera on 2040-cars

Auto blog

GMC Sierra AT4X reportedly on the way, nameplate could be GMC's ZR2

In 2016, GM filed an application with Mexico's Institute of Industrial Property to reserve the name AT4X, and in 2019, the automaker made the same request to the U.S. Patent and Trademark Office. Seeing that GMC's current AT4 trim replaces the former All Terrain trim used on the last-gen Sierra pickup, there have been suspicions ever since those trademark filings that GM would use the AT4X name to replace GMC's former All Terrain X trim. GM Authority reports that this is precisely what's going to happen, citing "sources familiar with the matter." The outlet even gleaned an equipment group number: 4SG for AT4X, whereas AT4 is equipment group 4SB.  The surmise is that GMC is again developing its versions of Chevrolet's dirt-clobbering pickups that wear the ZR2 name. Spy shooters caught the GMC Canyon earlier this month trotting around on Multimatic's DSSV dampers and a set of 33-inch tires like its Colorado ZR2 sibling. The Canyon already offers an AT4 trim, it's thought this beefier setup will roll into the lineup as an AT4X.  Stepping up to the half-ton league, at the end of last month Chevy released a teaser for the Silverado ZR2, which had been caught in prototype guise (pictured at top) around Detroit on at least two occasions. We've mused that the production Silverado ZR2 could take some hardcore off-roader cues from the factory-upgraded Silverado ZR2 race truck like a lifted stance, long-travel front suspension, four-leaf springs instead of three-leaf, electronic locking front and rear differentials, and a wider track. One of the production prototypes was caught on 33-inch tires, but we wouldn't be shocked to see 35-inchers on the spec sheet. That size would match the race truck and the rubber fitted to the cross-town rivals Ford Raptor and Ram 1500 TRX. A GMC Sierra AT4X would be the plusher, pricier, chrome-ier version of the ZR2. The aforementioned Multimatic shocks could also be on the docket. We'd expect the GMC Sierra AT4X to bow with the heavily updated 2022 pickup, whenever that arrives. Events around the world of late delayed the pickup, its launch now thought to happen late next year or in early 2023. Related Video:  

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

GM tinkering with Silverado, Sierra model mix amidst strong early sales

Variety, as they say, is the spice of life. That's a lesson that is currently being taught to General Motors, because despite a strong showing from its 2014 Chevrolet Silverado and GMC Sierra, the General's pickup sales still can't best those of cross-town rival Ford.
With 59,163 trucks moved, GM fell just over 1,000 units short of toppling Ford, and one of the main reasons for that, according to GM's chief sales analyst, was due to a lack of variety in the engines and body styles available on dealer lots. "We are still over-weighted toward crew-cab V8 trucks. Our light-duty mix will moderate over time as our launch progresses," said Kurt McNeil.
Loading dealers with the popular combination of the 5.3-liter V8 and the four-door, Crew Cab body style was intentional during the truck's launch, but as supplies of leftover 2013 models, which are being sold at heavy incentives, are beginning to wane, both budget-conscious and high-dollar buyers are looking elsewhere instead of at the volume model pickups.