2014 Gmc Sierra 1500 Base on 2040-cars

Auto blog

GM tells 2021 Chevy Express and GMC Savana owners to park vans outside due to fire risk

GM is telling owners of certain 2021 Chevrolet Express and 2021 GMC Savana work vans to park them outside and away from other vehicles and structures due to a fire risk. Additionally, the company is recalling 10,154 of the vans it believes to be at risk of catching fire. The breakout is 7,891 for Chevy and 2,223 for GMC.  Only vehicles equipped with the 6.6-liter V8 (the new-for-2021 engine option) are included in the recall, and it’s limited to vans produced on or prior to December 7, 2020. The problem stems from some anti-rotation tabs on the positive battery terminal that are too close to a fuse block assembly attachment post. This lack of clearance could cause the tabs to come into contact with the fuse block, causing a short circuit. GM points out that a short-circuit of this nature could cause battery drain or lead to a fire under the hood. Your warning for the time being will come in the form of a low battery voltage warning, or you might just wake up with an unexpected dead battery. GM says that it first opened an investigation into this problem on January 26 this year after it was notified of an underhood battery fire on a 2021 Express. The investigation found three other underhood fires and concluded that these fires were originating from the positive battery cable attachment near the fuse. This recall was officially posted on March 11 this year, and the National Highway Traffic Safety Administration just sent a notification out to the media yesterday. The fix is a relatively simple one. Dealers are going to remove a portion of the anti-rotation tab on both positive battery cable terminals near the fuse block assembly attachments. This increases the clearance and eliminates the risk of fire, GM says. The job will be done under warranty, and GM says it will begin contacting owners for recall work on May 3 this year. Recalls Chevrolet GMC Safety Minivan/Van Commercial Vehicles

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

2020 GMC Sierra HD caught in double-cab, low-trim gas-engine guise

Naturally when the 2020 GMC Sierra HD was revealed, GMC picked the flashiest, most-impressive Denali model with the big crew cab configuration and diesel engine. But obviously not all will be equipped that way, so it's exciting to see a lower trim model like the truck above. This 2020 GMC Sierra HD is a more modest SLT trim model equipped with the gas V8 and lacking the MultiPro tailgate. Styling doesn't take a hit with the shorter shape, and arguably, it looks more athletic without so much metal between the wheels. The length is the only real difference, with the rest of the sheetmetal just as chisled on the bigger version. Interestingly, this gas-powered Sierra HD still has a big hood scoop from its diesel sibling. On the current GM heavy duty trucks, only the diesel models get a scoop, and it's specifically for getting more cool air to the intake. The Silverado HD may continue this differentiation, but GMC is clearly keeping it for all models. When the Sierra HD goes on sale this summer, it will be available with either a 6.2-liter gasoline V8 like in this truck, or a 6.6-liter turbodiesel V8 making 445 horsepower and 910 pound-feet of torque, the same as the current model. All models get bedside steps, and the MultiPro tailgate is available either as standard or an option with all trims. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.