2002 Ford Taurus Ses on 2040-cars
Clinton Township, Michigan, United States
Body Type:Sedan
Engine:3.0L V6
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 6
Make: Ford
Model: Taurus
Trim: Four Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: FWD
Options: CD Player
Mileage: 157,000
Safety Features: Anti-Lock Brakes, Driver Airbag
Sub Model: SES
Power Options: Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats
Exterior Color: Gray
Interior Color: Gray
Charcoal gray 2002 Ford Taurus with 157,000 miles. This car has been a daily commuter car up and down M59 between Clinton Township and Pontiac. I only run synthetic oil and change it religiously every 5,000 miles. This car has always been serviced by LTM Quick Lube in Auburn Hills. This Taurus is well maintained and has no mechanical issues, if something needed fixing I fixed it right away. Tires and brakes are in good shape. I have been able to get upwards of 30 miles per gallon commuting. Remote Starter & brand new battery. Is the body perfect? No, it does have some dents and dings, rust spots on the hood and a little rust over the rear wheel (typical), does not leak. Local pickup only.
Engine: V6 3.0 Liter
Transmission: Automatic
Driveline: FWD
4-wheel ABS
Air conditioning
Power Windows
Power Door Locks
Cruise Control
Factory Antitheft Alarm
Power Steering
Tilt Steering Wheel
AM/FM Stereo
Cassette
Single Disc CD
Dual Airbags
Power Seat
Rear Spoiler
Alloy Wheels
Ford Taurus for Sale
2000 ford taurus runs and drives well no reserve
2009 ford taurus se cd audio cruise control only 24k mi texas direct auto(US $13,980.00)
1996 ford taurus gl ... 8,794 original low miles(US $5,700.00)
2010 ford taurus limited awd leather sync 19" wheels 9k texas direct auto(US $21,980.00)
1999 ford taurus se sedan 4-door 3.0l(US $580.00)
2013 taurus limited.no reserve.leather/navi/moon/blis/camera/sensor/sony/rebuilt
Auto Services in Michigan
Van Buren Motor Supply Inc ★★★★★
Van 8 Collision ★★★★★
Upholstery Barn ★★★★★
United Auto & Collision ★★★★★
Tuffy Auto Service Centers ★★★★★
Superior Collision ★★★★★
Auto blog
Forza Horizon announces January Recaro Car Pack with LFA N"urburgring Edition
Wed, 26 Dec 2012Another month, another car pack for Forza Horizon. This time it's the Recaro Car Pack featuring a motley gang of cars and trucks: the 1983 GMC Vandura G-1500, 1995 Ford Mustang Cobra R, 2012 Cadillac Escalade ESV, 2005 Mercedes-Benz SLR, 2012 Lexus LFA Nürburgring Edition and 2012 Lotus Exige S.
It'll be up for download on Xbox Live on Tuesday, Jan. 1, 2013 for 400 MS Points. As usual, if you have the Forza Horizon Season Pass you can get them all free, and Season Pass holders will also get a bonus car that's not pictured: the 2009 Pagani Zonda Cinque Roadster.
The Pagani is everything opposite to that Vandura, but while you might not ever win anything with the van, you can always use the back of it as a place to give out free hugs. Check out the video and press release below for more details.
Ford will add lots of carbon fiber to new vehicles
Sat, Apr 18 2015With BMW receiving a bunch of positive press for its usage of carbon fiber to build its i3 and i8 plug-in vehicles, Ford is jumping into that game as well. The US automaker has reached a manufacturing agreement with Dow Chemical to speed up the use of that material in Blue Oval vehicles. Carbon fiber usage will cut weight from Ford's new products, boosting fuel efficiency as a result. Ford will work with DowAksa, a 50/50 joint venture between Dow Chemical and Turkey-based Aksa Akrilik Kimya Sanayii A.S, on a manufacturing partnership. The goal is to speed up technology research to make it cheaper to make cars and trucks with carbon fiber materials. Ford's light-weighting efforts received a boost of sorts this week when its aluminum-body 2015 F-150 was awarded a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing, making this year's version the safest to date. The new body construction cut 700 pounds from the truck's curb weight. Take a look at Ford's press release about DowAksa below. FORD, DOWAKSA TO JOINTLY DEVELOP CARBON FIBER FOR HIGH-VOLUME AUTOMOTIVE LIGHT-WEIGHTING APPLICATIONS Ford and DowAksa formalize agreement to advance the adoption of cost-effective carbon fiber components through technology validation and proof of concept to reduce vehicle weight and increase fuel efficiency without sacrificing strength Agreement provides pathway for a high-volume manufacturing partnership New joint development agreement accelerates joint research announced in January in partnership under new U.S. composites manufacturing institute Ford and DowAksa today signed a joint development agreement (JDA) to formally advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter for greater fuel efficiency, performance and capability. The agreement, between Ford Motor Company, Ford Global Technologies and DowAksa – a 50/50 joint venture between The Dow Chemical Company and Aksa Akrilik Kimya Sanayii A.S – will combine DowAksa's feedstock capacity, carbon fiber conversion and downstream intermediates production capabilities with Ford's expertise in design, engineering and high-volume manufacturing. The goal is to produce materials that make cost-effective carbon fiber composite parts that are much lighter than steel but meet automotive strength requirements.
How Ford switched gears for the all-new F-150
Fri, Mar 6 2015Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.

