2010 Ford Ranger Xlt Supercab Silver Clean! on 2040-cars

Auto blog

Ford confirms 1.5-liter EcoBoost four-cylinder engine for 2014 Fusion

Earlier this week, reports were swirling 'round the internet about the 2014 Ford Fusion getting a new 1.5-liter three-cylinder EcoBoost engine. That was... half correct. Ford today confirmed that the 2014 Fusion is, in fact, getting a new 1.5-liter EcoBoost mill, but it has four cylinders, not three.
The new 1.5-liter engine will be the fifth EcoBoost powerplant from Ford Motor Company. Initially to be built at the automaker's Craiova, Romania plant, it will also be offered in the Fusion's twin, the Mondeo, in other markets. This engine will debut at the Shanghai Motor Show next month, and the 1.5-liter is of particular importance in the Chinese market - there is significant tax relief in the People's Republic for vehicles powered by engines with a capacity of 1.5 liters or less.
At a media briefing Thursday, Ford declined to divulge exact power or fuel economy numbers, though Joe Bakaj, vice president of powertrain engineering, told Autoblog that power output should be similar to that of the current 1.6-liter inline-four, and that overall efficiency will be "better than the 1.6." Our earlier report stated that the 1.5-liter four will produce 177 horsepower and 177 pound-feet of torque - losses of 1 hp and 7 lb-ft versus the 1.6-liter engine. Ford states that the 1.5-liter four will feature many of the same technologies used on the company's 1.0-liter EcoBoost inline-three, including an integrated exhaust manifold that recaptures much of the engine's heat.

Ford and Lincoln recall about 170,000 vehicles over defective rear-view camera

Ford and Lincoln have jointly issued a safety recall that includes nearly 170,000 vans and SUVs built between the 2018 and 2023 model years. The vehicles included in the campaign are equipped with a rear-view camera whose image can cut out while the driver is backing up. Assigned recall number 23V-598 by the National Highway Traffic Safety Administration (NHTSA), the campaign includes the following cars: 7,649 units of the 2020-2023 Aviator fitted with the standard rear-view camera and built from October 19, 2019, to August 17, 2023. 70,600 units of the 2018-2021 Navigator fitted with the 360-degree camera and built from March 16, 2017, to December 23, 2021. 66,740 units of the 2022-2023 Transit fitted with either camera system and built from February 26, 2021, to August 17, 2023. 24,468 units of the 2021 Bronco fitted with the 360-degree camera and built from September 23, 2020, to December 22, 2021. Ford explains that the defect is present in all of the 169,277 vehicles included in the campaign. While these are different cars equipped with different technology, they all suffer from the same problem. The company explains that "customers may intermittently experience either a rear camera blue image or a full blue or black image on the SYNC [infotainment system] screen when the vehicle is placed in reverse, or when the 360-degree view is selected and available." It adds that losing the camera's image while backing up increases the risk of the crash. The cause of the problem varies from model to model. Ford has narrowed it down to the camera hardware, the wiring retention, and the Image Processing Module - V (IPMB) software. It adds that "fretting corrosion causes tin oxide formation on the internal camera connector due to [a] thermally-induced micro-movement between the tin-plated contact surfaces," and that the rate of tin oxide accumulation depends on factors such as the temperature and the humidity. It has also traced some of these issues to a problem during the manufacturing process. Ford will begin notifying owners of affected vehicles by mail on October 2. When parts are available, owners will be asked to bring their van or SUV to an authorized dealer so that a technician can replace the rear-view camera. Transit models included in the campaign will also receive a software update. Owners who have already paid to fix the problem can claim a reimbursement until June 30, 2024. This isn't Ford's first rear-view camera-related recall.

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.