2010 Ford Ranger Xlt on 2040-cars

Auto blog

Second-tier UAW workers promoted for first time after Ford hits quota

The United Auto Workers put out a statement on Friday that 55 Ford workers chosen by seniority would be moved from the Tier 2, entry-level pay rate of around $19 per hour to the Tier 1, non-entry-level rate of about $28 per hour. One of the stipulations in the 2011 UAW-Ford agreement was that only 20-percent of the total hourly workforce could be paid the Tier 2 wages agreed upon in 2007; after that, those workers had to be moved to Tier 1. Even so, the new Tier 1 status makes them less expensive to Ford than veteran Tier 1 workers because they receive fewer benefits. However, Automotive News had reported that same day that Ford was 69 workers shy of the limit, and when AN asked Ford about the situation Ford said it had "some room" on the entry-level roster. If workers do move to the higher pay grade, it will be the first time that's happened since the two-tier system was agreed. But it sounds like there's going to be some haggling between the UAW and Ford before that happens. Ford is the only one of the Detroit 3 automakers to have to work with a cap, since it didn't go through bankruptcy proceedings during The Great Recession; General Motors and Chrysler jettisoned the cap in 2009. GM is said to have 16 percent of its hourly workers at Tier 2 while Chrysler has 42 percent, but Fiat-Chrysler CEO Sergio Marchionne has long been opposed to the two-wage system. The UAW is preparing for its 2015 negotiations with the US automakers. It wants to eliminate the difference in pay by going to the higher scale, if there is a consensus among automakers it seems to be that they also want a single wage, but less than the higher scale, with the addition of profit-based bonuses. The recent statement from the labor union is below. UAW President Dennis Williams and UAW-Ford Vice President Jimmy Settles announced today that the union is delivering on its promise to convert workers DETROIT, Jan. 30, 2015 /PRNewswire/ -- UAW President Dennis Williams and UAW-Ford Vice President Jimmy Settles announced today that the union is delivering on its promise to convert workers making entry-level wages to traditional employees. "The 2011 UAW-Ford agreement allows for a contractual limit of entry-level employees. Once that threshold is surpassed, entry-level employees convert by seniority to 'regular, non-entry level employment.' At this time, fifty-five UAW-Ford workers will receive the wage increases, which put them in the category of non entry-level employment.

Autoline streaming live from Detroit Auto Show right now

As you can already see, the Autoblog team is digging deep to bring you everything from the Detroit Auto Show media days today and tomorrow, with obsessive coverage of all of the new sheetmetal, hot concepts and industry news. But we're hardly alone in Cobo Hall, and our friend John McElroy and his Autoline team have fired up a live video webcast with interviews from the show floor that you can watch right now by scrolling below. The daily streaming broadcasts start at 1:00 PM Eastern today and tomorrow, with a large number of A-list executives, designers, and product planners from both domestic and foreign automakers are expected to sit in. Interviewees scheduled to appear include Al Gardner, President and CEO of Chrysler; David Zuchowski, brand-new President and CEO of Hyundai Motor America; Doug Scott, Truck Group Marketing Manager at Ford; and Peter Schreyer, President and Chief Design Officer at Kia. For the live feed and a full list of guests for both days, scroll below. Live broadcast by Ustream [Pop-out Chat Window] Day One Al Gardner, President and CEO, Chrysler Brand Ludwig Willisch, President and CEO, BMW of North America Doug Scott, Truck Group Marketing Manager, Ford Tim Mahoney, Chief Marketing Officer, Global Chevrolet Heiko Schmidt, Head of C-Class Product Planning, Mercedes-Benz USA Filip Brabec, Product Planning Manager, Audi of America Day Two Bob Ferguson, Senior Vice President, Global Cadillac Dave Zuchowski, President and CEO, Hyundai Motor America Mike Manley, President & CEO, Jeep Brand Peter Schreyer, President and Chief Design Officer, Kia Tom Kearns, Chief Designer, Kia Design Center America Jim Lentz, COO, Toyota Motor NA Tony Nicolosi, President & CEO, Volvo Cars North America Jose Munoz, Executive VP & Chairman, Nissan Americas Auto News Detroit Auto Show Audi BMW Chrysler Ford Kia Videos Detroit Autoblog 2014 Detroit Auto Show autoline Peter Schreyer

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.