1997 Ford Mustang Svt Cobra on 2040-cars

Auto blog

2013-2017 Ford Explorer recalled over rear suspension issue, again

Ford is recalling about 375,000 Explorer SUV models built between 2013 and 2017 in North America to fix a potential defect in the rear suspension. In "North America states and provinces where corrosion is common," which we take to mean areas that experience harsh winters and heavily salted roads, "a fracture of the outboard section of the rear suspension toe link" is possible on affected vehicles. Ford says 350,000 of these models were sold in the United States and another 25,200 in Canada. This isn't the first time Explorers of this generation have been recalled for fractured toe links. Back in the summer of 2017, 1.2 million Explorer models were recalled over toe links that could fracture if subjected to "frequent full rear suspension articulation (jounce and rebound)." A little over a year earlier, 75,000 Explorers were recalled over, you guessed it, rear toe links that may not have been welded properly. It's not just Explorers that Ford has recalled over rear toe links. Earlier this year, the automaker issued a recall that covered nearly 230,000 Ford Flex, Taurus and Lincoln MKT models. All of these recalled vehicles ride on similar unibody underpinnings that Ford calls the D4 platform. We can't say whether these other D4-based vehicles will get another recall as the Explorer has. Ford says it is aware of as many as 13 crashes and six injuries attributable to the toe links covered under this most recent Explorer recall. Owners will need to visit their preferred dealership, which will "complete a torque inspection of the cross-axis ball joint and replace it as necessary," according to Ford. Related Video:

2018 Ford Expedition spied looking stylish

The Ford Expedition and Lincoln Navigator got a cool reception for their 2015 warmed-over redesign. But with big, high-riding vehicles once again in vogue, Ford is pushing ahead with a ground-up redesign of its biggest SUVs. Based on these spy shots, the Expedition will continue to serve as the Navigator's more affordable twin. Yes, that's a bold prediction, considering we still haven't spotted Lincoln testing the new Navigator, but study the greenhouses on this Expedition prototype and the Navigator Concept from New York – from the arrow-straight belt line to the extra-long rear window to the aggressively raked windshield, this Expedition's overall profile is broadly similar to what Lincoln previewed earlier this year. While our spies claim the new Expedition will look to the F-150 for design inspiration, we see a departure from past Expedition tradition. Unlike the supposed Expedition spy shots we showed you nearly a year ago – which was nothing more than an SUV with an F-150's nose grafted on, this prototype's front-end styling looks softer and more aerodynamic, with a smaller grille and headlights, almost like an Escape or Edge. This kind of change would explain the additional front-end camouflage. In back, our spies rightly point out that Ford fitted a faux rear end to disguise the rear window's rake – expect the real thing to feature the angled rear window previewed on the Navigator Concept. Look at the last image in the gallery for a better idea of how the Expedition's rear window will actually look. We can't say a lot about the taillights, because of the camo, but non-LED taillights are present. We'd expect Ford to offer LEDs on higher trim levels. While the F-150's styling might not make the transition to the Expedition, its powertrains and emphasis on lightweight aluminum will. Our spies report the biggest SUV will ride on a new T3 platform and feature an aluminum body, with the F-150's 3.5-liter EcoBoost V6. Expect a ten-speed automatic transmission and start/stop tech for sure, while the smaller 2.7-liter, twin-turbo V6 could slot in as the Expedition's base engine – we're less sure on that one. And we're even more uncertain of the rumors of an Expedition Hybrid. Our spies report it could mate a 3.5-liter V6 with an electric motor(s) and battery packs for a more economical full-size SUV. Expect to see the 2018 Expedition debut in January, at the 2017 Detroit Auto Show.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.