1923 Ford Model T Depot Hack on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Should reflective paint earn automakers EPA credits?

No matter where you look around the world, governments are cracking down on vehicle emissions and aiming for higher fuel economy standards. Generally, automakers are pushing back against the increased regulation, and in the US, General Motors, Ford, and FCA US are looking for new compromises. The Big Three want to the EPA to grant them retroactive emissions credits for using tech that they claim reduces CO2 but not on the government agency's on-road testing. Among these technologies are things like reflective paint and glass, LED lights, ventilated seats, stop/start, and more efficient air conditioning compressors. Starting with the 2014 model year, the automakers can receive credits for a few grams per mile reductions on models with some of these solutions, according to Automotive News. However, the companies are also petitioning the EPA to make the credits apply to earlier vehicles with them, as well. The emissions advantages for systems like stop/start and less polluting AC refrigerants seem fairly obvious. For reflective paint and glass, the belief is that keeping a vehicle interior cooler should mean a lower need for air conditioning and therefore a decrease in CO2. Margo Oge, the former boss of the EPA's Office of Transportation Air Quality, told Automotive News these credits are part of the plan. "That's the whole point of what we tried to establish," she said. "We wanted companies to invest in and develop these technologies." The EPA wants vehicle emissions at the corporate average equivalent of 54.4 miles per gallon fuel economy by 2025, and so far that seems achievable. It will translate to less than 40 mpg on the EPA sticker. In a report last summer, the industry was about 10 grams per mile of CO2 better than the rules required, and that was solely based on 2012 model year vehicles. In an update for 2013, the companies were up to 12 grams per mile beyond targets. News Source: Automotive News - sub. req.Image Credit: Mark Humphrey / AP Photo Government/Legal Green Ford GM Emissions Fuel Efficiency FCA fca us

Ford F-150 production hampered by frame shortage

If anyone has questions about how Ford's new aluminum-bodied F-150 will hold up, it's not buyers. Orders are so strong for the fullsize pickup that competitors General Motors and Ram are discounting their offerings to hold onto market share. It's a shame for the Blue Oval then, that it can't build all the trucks it needs because frame supplier Metalsa isn't delivering enough frames. Neither Ford nor Metalsa has said what the problem is, but Ford employees are at Metalsa's Kentucky plant trying to get it sorted out, Automotive News reports. Overtime shifts at the Dearborn Truck Plant and the Kansas City Assembly Plant have been canceled due to the shortage that's been a problem for at least two months now. The issue is exacerbated by this being the changeover period in production from the old model to the new, which comes with its own issues. That would help explain why even though Dearborn production finished ramping up in January, output in April was down 9.2 percent compared to last year, according to AN. Transaction prices are up for the new truck, but overall F-150 production in Q1 was down 40 percent, and missing product means missing profits. Combined with the production drop for the new Ford Edge, the company's Q1 bottom line was robbed of $1 billion. It isn't clear when the frame issue will be solved, but workers at the plants are ready to run "all-out" when it is. Related Video: News Source: Automotive News - sub. req.Image Credit: Copyright 2015 Drew Phillips / AOL Plants/Manufacturing Ford Truck kansas city assembly plant