2004 Ford Freestar S Mini Passenger Van 4-door 3.9l on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Ken Block's 1965 Ford Mustang Hoonicorn RTR and CR Supercars Villain are retro done right

Gymkhana king Ken Block has had a pretty simple car history in his trademark videos, starting out with Subaru Impreza rally cars before moving into Ford Focus racers for the past four installments. His next video, though, Gymkhana Seven, kind of goes back in time.
Rather than the cutting-edge rally racers of past videos, Block will pilot a heavily modified 1965 Ford Mustang, called the Hoonicorn. How heavily modified is it? Well, Block's Hooligan Racing Division, ASD Motorsports and Vaughn Gittin Jr.'s RTR, spent two years working on it, ditching the standard engine and rear-wheel-drive layout and replacing it with a 410-cubic-inch Roush Yates V8. Yes, that's a NASCAR engine, and it produces 845 horsepower.
A NASCAR-powered Mustang would be news in itself, but it's the other powertrain changes made by Block and Co. that really makes headlines. Power is channeled through a one-off Sadev transmission and all-wheel-drive system, meaning that Block has basically married a NASCAR stock car with a WRC racer. ASD also developed the customized suspension, tubular chassis and roll cage. The wide Mustang body is the work of RTR and Block's own Hoonigan Racing Division, while the 18-inch fifteen52 wheels are shod in Pirelli Trofeo R tires that use a specialized compound exclusive to Block.

Old vs. new debate gets new life with $25,000 Fiesta ST vs. E46 M3 showdown

You know who you are. There's probably a few of you reading; the ones that say, "Why would I spend $27,000 on a new Mazda MX-5 when I could get a used Chevrolet Corvette with more power." Yes, we're talking to you, used car proponents. While it is a fair argument, it's not like used cars don't come with drawbacks of their own, though.
In an attempt to put this new-versus-used argument to bed once and for all, Matt Farah of the The Smoking Tire has picked up a pair of $25,000 cars - a used, but lightly modified, 2003 BMW M3 and a 2013 Ford Fiesta ST. Naturally, there's a comparison.
Farah, as he's wont to do, does get into the nitty gritty of what each car is like to drive, and discusses the merits of used and new-car shopping. But as he rightly points out while testing the M3, "So, it is a good car. But like any used car, it really does depend on the individual car."