Red Convertible 1963 289 4 Speed on 2040-cars

Auto blog

Ford recalling 433k cars for engines that don't shut off

Ford Motor Company has announced an enormous recall affecting 433,000 vehicles built between April 2014 and June 2015. There's a problem with the body control module in the affected vehicles that can prevent them from turning off, even if the key is removed from the ignition or stop/start button has been pressed. Individual models include the Focus and C-Max, both built at the Michigan Assembly Plant. The defective Foci were built between June 17, 2014 and June 12, 2015, while the C-Maxes were built between April 22, 2014 and June 12, 2015. Also affected are model year 2015 Escape CUVs, built at the Louisville Assembly Plant in Kentucky, between April 1, 2014 and June 12, 2015. As is usually the case, the overwhelming majority of vehicles – 374,381 – are registered in the United States, while the 52,180 are in Canada and 5,135 are in Mexico. The Blue Oval is not aware of any injuries or accidents due to this defect. Individual consumers, meanwhile, will need to report into dealers to have the body control module's software updated. Scroll down for the brief press release from Ford. Related Video: FORD ISSUES SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., July 2, 2015 – Ford Motor Company is issuing a safety compliance recall for approximately 433,000 vehicles in North America, including certain 2015 Focus, C-MAX and Escape vehicles, for an issue with the body control module. In these vehicles, it could be possible for the engine to continue to run after turning the ignition key to the "off" position and removing the key, or after pressing the Engine Start/Stop button. This is a compliance issue with FMVSS 114 regarding theft protection and rollaway prevention. Ford is not aware of any accidents or injuries associated with this issue. Affected vehicles include certain 2015 Focus vehicles built at Michigan Assembly Plant from June 17, 2014, through June 12, 2015; certain 2015 C-MAX vehicles built at Michigan Assembly Plant from April 22, 2014, through June 12, 2015; and certain 2015 Escape vehicles built at Louisville Assembly Plant from April 1, 2014, through June 12, 2015. There are 432,096 vehicles in North America, including 374,781 in the United States and federalized territories, 52,180 in Canada and 5,135 in Mexico. Dealers will update the body control module software at no cost to the customer.

Vile Gossip | Adventures in tire testing

Jean Jennings has been writing about cars for more than 30 years, after stints as a taxicab driver and as a mechanic in the Chrysler Proving Grounds Impact Lab. She was a staff writer at Car and Driver magazine, the first executive editor and former president and editor-in-chief of Automobile Magazine , the founder of the blog Jean Knows Cars and former automotive correspondent for Good Morning America . She has lifetime awards from both the Motor Press Guild and the New England Motor Press Association. This is her first column for Autoblog — look for more Vile Gossip in the future. I began writing at Car and Driver magazine back in its golden age in the 1970s, before I'd actually read it. I knew very little about cars. The only magazine I read religiously was Four Wheeler because I owned big trucks and liked to go off-roading with my Chrysler Proving Grounds friends. My vast 10 years of driving experience up to that point (high-speed dirt-road idiot, taxicab driver, Chrysler Proving Grounds test driver) had less bearing on my being hired at Car and Driver than the fact that the editor just wanted to rile up the all-male staff. He didn't need me for that. They were already in full dudgeon when I arrived. They'd just spent a chunk of time testing a stack of tires for their big tire-test issue, and the editor-in-chief was toe-to-toe with the technical editor over the rankings of the top 10 tires. It was loud, and it was angry. I had no idea that car magazines tested tires. Cab driving had led me to believe that airing up a tire and changing a flat was all you needed to know. I changed so many flats on that cab, I eventually wound up in front of a live audience on the " Oprah Winfrey Show" demonstrating my brilliance with a jack and a tire iron. My point, of course, is that tires are more controversial, and also more essential, than you'd think. My other point is that it's good to get worked up about the subject, but not quite so good to let yourself be seen, as I did, on my hands and knees with my ass up in the air on national TV. This is how I prefer to test a tire: First, pick a top brand. Then accept their invitation to try and beat the crap out of their tire. I chose Yokohama, celebrating its 100th anniversary this year. The big news for them was the GEOLANDER M/T G003!

Ford bringing production F-150 to Detroit with Atlas styling and Alcoa blast shields

According to a report in Bloomberg, the 2015 Ford F-150 will indeed be showing up at the Detroit Auto Show next month. It will bring attitude with it, not only in the form of sheetmetal inspired by the Atlas concept (pictured) that appeared at the 2013 Detroit show but also in the Alcoa military blast shields among the display being used to showcase the ruggedness of aluminum.
There's been a lot of talk about the F-150 switching to aluminum body panels (although maintaining a steel frame), and for good reason. The lightweight body is expected to shed more than 700 pounds and greatly increase its highway mileage, but production-line issues and possible delays have been a major focus of attention concerning the best-selling vehicle in America for 32 years, meaning Ford has to get it right. F-150 is responsible for a massive portion of the company's global profits and it will come in a year when company profits are already predicted to decline because of new car launches.
When it comes to dings, the Bloomberg story says Ford wants Alcoa to supply some of the military-grade aluminum it uses for blast shields on battlefield vehicles to help it talk up the toughness of aluminum. Reading commentary on the many stories about the F-150 reveals there are many more little questions about the aluminum overhaul, like "How much will it cost to repair and insure?" and "How will companies hang their magnetic signs?" Answers should start coming in a couple of weeks.