1964 Ford Falcon on 2040-cars

Auto blog

Ford recalls 83k Taurus and crossover models for halfshaft issue

Ford and the National Highway Traffic Safety Administration have issued a recall for some 83,250 vehicles in the US, for an issue with halfshafts. More specifically a "halfshaft retention circlip" might not have been properly installed on affected vehicles, with the result being halfshafts that may move improperly or disengage completely from the linkshaft while driving. The NHTSA release also notes that the issue may occur "without prior warning" which obviously factors in to the timeliness of getting this checked.
Should the halfshaft disengage, a few troubling things could happen. If it occurs while driving, power from the engine will no longer be transmitted to the wheels. And, if the vehicle is parked without the parking brake applied after disengagement of the circlip, vehicles may roll away even if they're transmissions have been placed in "Park."
Affected vehicles are as follows: Ford Edge and Lincoln MKX crossovers from model years 2012 to 2014; Ford Taurus and Lincoln MKS sedans from model years 2013 to 2014; Ford Flex and Lincoln MKT vehicles from model years 2013 to 2014.

GM, Ford and FCA expected to extend coronavirus shutdown into April

U.S. automakers General Motors, Ford and Fiat Chrysler are expected to extend their current shutdown in North America into the month of April as the fight to slow the spread of the coronavirus continues. At this point, the exact dates that Detroit's Big Three automakers will restart vehicle production remains up in the air. Ford said in a statement that it does not plan to restart production until at least April 6 but warned it could be further delayed into April. United Auto Workers President Rory Gamble sent a letter to union members saying that FCA had "no plans to reopen on March 30." GM has yet to confirm its plans — its last statement said the decision when to reopen "will be reevaluated week-to-week after" March 30 — but unnamed sources told Reuters that it will also comply with Michigan Governor Gretchen Whitmer's order barring non-essential businesses from operating until April 13. Gamble's letter said the union is "waiting to hear from GM and are demanding that they put our membersÂ’ safety first and adhere to government and health officialsÂ’ recommendations to stay-at-home." A spokeswoman for Whitmer was unable to clarify on Tuesday whether auto production is considered essential or not. Michigan has declared vehicle sales by auto dealers to be impermissible under the order, but dealerships and other facilities can make repairs.  The UAW also said two Fiat Chrysler union members — one in Indiana and one in Michigan — have died after contracting the coronavirus. A group representing major U.S. and foreign automakers warned in a letter to U.S. lawmakers with other industry groups on Monday that, "Auto industry analysts are expecting sales to be down by as much as 40 percent in March compared to 2019." The letter said 95% of North American auto plants are currently closed. Reuters contributed to this report. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Government/Legal Hirings/Firings/Layoffs Plants/Manufacturing Chrysler Fiat Ford GM coronavirus

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.