1961 Ford Falcon Sedan Delivery Base 2.8l on 2040-cars
Marion, Illinois, United States
Body Type:U/K
Engine:2.8L 2786CC 170Cu. In. l6 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Interior Color: Gray and Black
Make: Ford
Number of Cylinders: 6
Model: Falcon Sedan Delivery
Trim: Base
Warranty: Vehicle does NOT have an existing warranty
Drive Type: U/K
Mileage: 59,000
Exterior Color: Red and Black
1961 Ford Falcon: 3-speed on the column; straight 6; tachometer and oil pressure gauge/engine temperature gauge/volt meter gauge added; 4 new tires; new clutch; new pressure plate; new tie rods on the front; new steering column; new horn; new fuel pump; extra parts come with vehicle (including extra transmission, 3 hubcaps, 2 taillight covers, 2 used tires, steering column wiring, extra steering column)
We have owned this vehicle for about 15 months.
Buyer can pick up, or we will deliver within 150 miles of our location once payment is received.
Ford Falcon for Sale
Auto Services in Illinois
Xtreme City Motorsports ★★★★★
Westchester Automotive Repair Inc ★★★★★
Warson Auto Plaza ★★★★★
Voegtle`s Auto Service Inc ★★★★★
Thom`s Four Wheel & Auto Svc ★★★★★
Thomas Toyota ★★★★★
Auto blog
Focus STs for SEMA include Lotus and Gulf liveries, rally-fied police car
Tue, 22 Oct 2013Ford, as we mentioned on Saturday, is pulling out all the stops for November's SEMA show, bringing 57 vehicles to the Las Vegas event. Ford will be staggering the release of its SEMA flotilla, though, so expect to hear a lot about the new additions to the fleet in the weeks to come. We already showed you the Fiesta, Fiesta ST and Mustang models that made up the first batch of SEMA cars. Next up, we have a quartet of modded Focus STs joining Ford's SEMA roster.
Our first Focus ST (pictured above) sports the legendary livery of Gulf Racing. The orange-on-blue scheme, which Ford helped make famous at the 24 Hours of Le Mans, has been updated for 2013, with a more vibrant blue. This ST was built by Universal Technical Institute, while the exterior was done by Neil Tjin of Tjin Edition. Side exhausts, a Vortech supercharger and a Motiv Concepts high-flow cat allow the ST to breathe a bit easier, while Forgestar wheels contrast well with the iconic paint scheme.
Focus ST number two has been done-up by PM Lifestyle and is inspired by "Southern California car culture." Sporting a sleek, pale blue paint job, there's also no shortage of carbon fiber on the car's exterior. The 2.0-liter, turbocharged, four-cylinder engine has been massaged by the likes of Banks Power, COBB Tuning and Ford Racing, while the suspension is wearing a shiny, new set of coilovers and sway bars. The meaty brakes, tucked behind 19-inch, Rotiform wheels, come from Wilwood, while the cabin has been fitted with a pair of Sparco Chrono seats and five-point, Schroth harnesses.
2015 Ford Mustang EcoBoost flogged and analyzed by Ignition
Mon, 13 Oct 2014Aside from the way it looks and perhaps its independent rear suspension, the biggest bit of news on the 2015 Mustang may be the inclusion of its 2.3-liter, turbocharged four-cylinder engine. That blown mill marks the first time since the Mustang SVO of the '80s that a turbo has been fitted under the engine of Ford's pony car.
The Mustang EcoBoost is the subject of the latest episode of Ignition from Motor Trend, giving us a great look at the technical, nitty-gritty side of the turbocharged coupe. Covering it from bow to stern, host Carlos Lago walks us through the boosted Ford before taking to the track for some driving impressions, with particular praise given to the low-end grunt of the 2.3-liter mill.
Check out the full video and then let us know which 2015 Mustang has your interest piqued the most - the EcoBoost four, the 5.0L V8 or the entry-level V6.
All eyes on Detroit as automakers prepare for slow, careful reopening of plants
Thu, May 14 2020DETROIT — The U.S. factories that make Fords, Chevys and Jeeps are coming back to life this week as workers install new safety equipment and wake up machines ahead of the high-stakes restart the Detroit automakers plan to launch on Monday. Ford, General Motors and Fiat Chrysler Automobiles all plan to reopen North American factories on May 18. The reopening of the U.S. auto sector will be a closely watched test of whether workers across a range of industries can return to factories in large numbers without a resurgence of COVID-19 infections. How well the automakers do will be significant for the U.S. economy, as nearly 1 million workers are employed in the sector. Executives at Ford and GM said separately this week the companies have not recorded any cases of COVID-19 transmission in plants outside the United States since adopting new safety protocols. Those procedures include mandatory face masks, separation of workers on assembly lines, frequent cleaning of work areas and requirements that workers pass through temperature monitors and report any symptoms before entering a plant. The Detroit Three have taken unprecedented steps to share information about coronavirus safety practices and develop a common set of workplace standards for their restarts, working with the United Auto Workers union, executives said. "We thought it was critical that we did it together," Ford manufacturing and labor chief Gary Johnson told Reuters. "We've never done this as an industry." The Detroit automakers will restart U.S. plants without regular testing of workers, because they do not have access to sufficient testing capacity, executives and UAW officials said. They will test workers who report COVID-19 symptoms or have fevers discovered by temperature scanners installed at factory entrances. "We have to continue to push for this testing," United Auto Workers union Vice President Cindy Estrada told Reuters on Wednesday. "Unless we have testing weekly to keep sick people out of the plant there is always a risk." Adopting new safety practices is just part of the work the companies must do to reopen after an extraordinary shutdown that has lasted two months. Â Wave zero At Ford, workers going in to ready factories are part of what Chief Operating Officer Jim Farley calls "wave zero." The work of wave zero employees "is really important for success of the startup," he said in an interview.