6.0l V8 Diesel Lariat Leather Dually Tow Package Power Seat Bedliner Cd Mp3 4x4 on 2040-cars

Auto blog

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

Ford halves summer shutdown, ramps SUV production

For the third consecutive year, Ford is reducing the length of its summer shutdown for several factories to keep up with high demand for some models. This year, the decision means 40,000 more units of popular trucks and crossovers like the F-Series, Edge, Escape, and Explorer. Rather than the normal two-week break, workers at the Chicago, Dearborn Truck, Kansas City, Kentucky Truck, Louisville, and Oakville factories will only get a week off starting on June 29. Additionally, 10 plants for producing components to support these assembly lines will also have the shorter vacation. The rest of the Blue Oval's manufacturing locations will shutdown from June 29 to July 10 for maintenance and retooling. According to Ford, the decision comes because of low inventories and high demand on some of its popular models. The 2015 F-150 is lasting around 20 days at dealers, and the Edge spends an average of 10 days before being sold. Ford is hardly alone in deciding to keep locations open during the normal summer break, though. FCA recently made the decision not to shutdown four assembly plants and all of its factories for components to keep up with demand for models like the Jeep Cherokee, Grand Cherokee, and Dodge Durango. Related Video: FORD REDUCES SUMMER SHUTDOWN TO MEET DEMAND FOR FORD F-SERIES TRUCKS, EDGE, ESCAPE AND EXPLORER JUN 2, 2015 | DEARBORN, MICH. In response to increased customer demand, Ford will add capacity this summer to produce its most popular trucks and utilities Ford will shorten its summer shutdown from the traditional two-week summer shutdown to one week for a majority of North American assembly plants, increasing production by close to 40,000 units In April, Ford F-150 was turning at just 20 days on dealer lots, Edge sales were up 78 percent, and Escape and Explorer remained in tight supply. 2016 Explorers are now hitting dealer lots In response to customer demand for Ford's newest products, the company this year will produce close to 40,000 extra units by idling select plants for only one week during what has been the traditional two-week summer shutdown.. "To meet surging customer demand for our top-selling trucks and utilities, we are continuing to run our North American facilities during the traditional two-week summer shutdown in order to add close to 40,000 units," said Bruce Hettle, Ford vice president, North America Manufacturing.