2006 Ford F350 Diesel 4x4 Dually Lariat Crew Texas Truck on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost loses big power on 87 octane

The 2015 Ford Mustang with the 2.3-liter EcoBoost four-cylinder is a pretty potent package on paper. With 310 horsepower and 320 pound-feet of torque, it boasts better performance numbers than the 3.7-liter V6, but with better fuel economy as an added benefit. However, if you're in the market for one of these boosted 'Stangs, you should probably keep in mind that it really prefers to gulp premium, 93-octane fuel. It can drink 87-octane swill in a pinch, but you're going to find significantly less power underfoot when pulling away. While it's not shocking that the ponies are dialed back with a lower grade of gasoline, an alleged page from a Ford training manual obtained by Mustang 6G purports to show just how much power is lost, though. According to this document, the 2.3-liter EcoBoost makes 275 horsepower and 300 pound-feet of torque when running on lower octane fuel. That's a substantial reduction of about 11.3 percent compared to when the engine drinks 93 octane. Interestingly, according to Mustang 6G, that finding was a bit better than expected, because a Ford engineer reportedly said power would be down about 13 percent without altering peak torque. In speaking with Autoblog, Paul Seredynski of Ford powertrain communications, objected to part of this document. While he couldn't confirm the specific losses listed for the Mustang EcoBoost, "torque remains unchanged" with lower octane gasoline, Seredynski said. He speculated this training manual page was "possibly from before the engine was certified" and therefore showed incorrect figures. Serendynski did confirm that the automaker recommends using 93 octane, and like all modern engines, the software adapts if it's lower. "Peak power would be reduced" by using a lesser grade, he confirmed. Featured Gallery 2015 Ford Mustang EcoBoost: First Ride View 20 Photos News Source: Mustang 6GImage Credit: Copyright 2015 AOL, Ford, Mustang 6G Ford Technology Convertible Coupe Performance ecoboost ford mustang ecoboost

Ford cranks up '32 Ford body production

If you're going to build your own hot rod, you'll want to start with a '32 Ford 5-Window Coupe. Favored by American servicemen returning from World War II, the '32 Ford remains the very icon of the hot rod to this day. The trouble is there were only so many of them made in the first place, and finding one today can be a challenge. That's where reproduction models come in.
The aftermarket is replete with companies that will sell you a fiberglass body in the form of a '32 Ford coupe, but quality can be hit or miss. So to help meet demand among hot rod builders and enthusiasts, Ford has teamed up with United Pacific Industries to offer officially licensed body shells.
Announced at the SEMA show in November, the '32 Ford 5-Window Coupe body is made from stamped steel according to original specifications from original machinery where possible or reproduced machinery built to the same original specifications where necessary. The bodies are ready to accept vintage powertrains or crate motors from the Ford Racing catalog, and join the 9,000 other parts offered in the Ford Component Sales catalog - including similar reproduction bodies available for the 1965-70 Mustang and 1940 Ford Coupe. From there, the proverbial sky's the limit.

J Mays retiring from Ford design, succeeded by Moray Callum

Ford's highly influential head of design, J Mays, has announced that he'll be retiring from his position after 33 years in the industry, 16 of which were at the Dearborn, MI-based company. Upon departure, he'll be succeeded as group vice president of design by Moray Callum. If that last name sounds familiar, yes, he's the brother of Jaguar's Ian Callum.
It's difficult to explain just how big of a role Mays had on not just Ford's design over the years, but on the entire industry. Before heading to Dearborn, Mays worked for Audi, BMW and then Volkswagen, where he was involved in concept cars that paved the way for design icons like the first-generation Audi TT and the Volkswagen New Beetle. As for his Ford resume, it's extensive.
Mays joined the company in 1997 as design director for Ford, Lincoln, Mercury and Mazda, as well as the Premier Automotive Group (Volvo, Land Rover, Jaguar and Aston Martin). He was heavily involved in the Ford Fusion, Focus, Fiesta, Taurus, F-150 and Mustang, while also contributing to concept cars like the Atlas, Evos, 427, Forty-Nine, Shelby GR-1, Lincoln MKZ and the MKC.