Ford F-250, page #93

Ford F-250 Price Analytics

About Ford F-250

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

BMW to follow Honda back into F1?

The economic downturn wrought devastating effects on motor racing. Formula One alone lost half its engine suppliers when Honda left at the end of the 2008 season, and both BMW and Toyota followed at the end of 2009. But things are looking up again. Cosworth may have dropped out this season, reducing the engine suppliers to three: Ferrari, Renault and Mercedes, the latter of which admits that it may have left had the engine formula not changed. But Mercedes has stayed and is dominating the championship. Honda is coming back next season. And word around the paddock is it may not be the only one.
According to Giancarlo Minardi - founder of the team now known as Scuderia Toro Rosso - BMW engineers have been conspicuously spotted lately at F1 test sessions and grands prix, lending to speculation that the new engine regulations may entice the Bavarian automaker back into the series. According to Minardi, BMW's marketing division is pushing for the automaker's return to F1, with the board slated to make a decision in May. BMW would be more likely to consider an engine-supply deal rather than taking a team over like it had with Sauber, but with which team or teams it might collaborate remains a big question mark at this point.
As if that's not enough, Ford is said to be considering taking over Cosworth's aborted V6 turbo engine program to take both outfits back into the sport as well. Cosworth supplied F1 engines under the Ford banner for years, but returned under its own name for four seasons from 2010 through 2013 before shuttering its program to develop an engine to meet the new regulations adopted this season.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford Explorer, Expedition next to go aluminum?

Ford made some serious waves when it unveiled the latest F-150. Instead of making its bodywork out of steel, like just about every other truck on the market, Ford went with aluminum. And you can bet the F-150 won't be the last Ford model to go with the lightweight alloy construction, either.
Our compatriots at Edmunds report that Dearborn is considering replacing two of its most popular SUVs with aluminum versions. One candidate is the Expedition, which would make sense considering that the current model (like the two preceding generations and the fullsize Bronco before it) is based on the F-150's underpinnings. Another is the Explorer, which was traditionally based on the Ranger pickup but went with a car-like unibody chassis in its current iteration. If the Explorer does go the way of aluminum, don't expect it to be a part of its very next update, which is likely due too soon for such major changes.
It would stand to reason that, if the Expedition were to go aluminum, so would the next-generation Lincoln Navigator. Ditto the MKT together with the Explorer. But those aren't likely to be the only models in contention for aluminum construction. Like any other automaker, Ford is under pressure to steadily reduce its carbon emissions and improve its fuel economy figures, prompting it to look at a whole range of measures - including more efficient engines, lower rolling-resistance tires, active aerodynamics and lightweight construction. Expect aluminum to play a big part in that equation moving forward.

Ford Transit Skyliner Concept is a Gulfstream for the road

If you are afraid to fly or just want to arrive at your ultimate destination in absolute comfort, then the Ford Transit Skyliner concept might be the perfect vehicle for you. Built by Galpin Auto Sports and based on a 2015 Transit, the van is basically a private jet on wheels. It even has a touch of Transformers about it with the ability to switch between four modes by pressing a button in a smartphone app.
Based on the long wheelbase, high-roof model with 487 cubic feet of cargo space and 6 feet, 9.5 inches of interior height, the Skyliner has movable captains chairs that shift around among four modes. In theater mode, the seats turn and recline to face a 52-inch retractable movie screen with 7.2 surround sound. For business, a motorized table unfolds, and the chairs gather around it. There is a mode for tailgating where the door opens four-feet wide, and, when traveling, passengers can recline back with footrests that extend for maximum comfort.
To make the ride even plusher, there is a satellite and media server to meet your entertainment needs, and there is even a built-in bar in the back. If this Ford had a bathroom, you could live in it. Of course, you would need to hire a driver to enjoy all the amenities in the back.

Chrysler called out over lackluster Ram Runner by racer who helped develop it

Fans of off-roading and desert blasting might recall that Chrysler offers an aftermarket conversion that can turn a Ram 1500 into a road-legal desert racer, called the Ram Runner. The kit, sold through Mopar, includes some significant suspension upgrades, body tweaks and a brawnier cat-back exhaust for the truck's 5.7-liter V8.
Considering all of this, comparisons with the almighty Ford F-150 SVT Raptor are common. Among the off-road community, that makes these two a sort of Chevrolet Camaro and Ford Mustang for people that prefer driving on dirt. In the Race-Dezert forum, the discussion as to which truck was better was proceeding as normal - Ram fans said their piece and Ford fans said theirs. Then, a man named Kent Kroeker offered up his two cents.
See, Kroeker is a Baja racer, and the man that helped develop the Ram Runner. Despite his association with the truck, though, he had some less than kind words for Chrysler and the Ram Runner.

Reflecting on the Ford GT on its 10-year anniversary

Ten years ago, during the bright-eyed enthusiasm of the early 2000s and before the collective automotive industry did its best Titanic impression, we had the Ford GT. An everyman's supercar like there'd never been (remember, this was before 638-horsepower Corvettes were a thing), the GT arrived with a supercharged, 5.4-liter V8 that produced 550 horsepower and graced this retro-styled rocket with an easy, sub-four-second sprint to 60 miles per hour.
Equal to the GT's performance were its looks. Inspired by the GT40 racers that dominated Le Mans and bested Ferrari in the 1960s, the sleek, low, almost-reptilian look of the GT was the absolute pinnacle of the retro styling that so defined the early 2000s.
Crank and Piston put together a video celebrating the ten-year-old GT, arguing that Ford is a bit too busy with the next-gen Mustang, which turns 50 next week, to do it themselves. In the short clip, there is gratuitous engine noise and supercharger whine, not to mention scenes of the white-on-red GT prowling the deserts and streets of Dubai. It's a bit short, but very nicely shot. Scroll down, have a look and be sure to turn up those speakers before getting started.

Watch how Ford torture-tested the 2015 F-150

The Ford F-150 has been the best-selling truck in the United States for the past 37 years, and the best-selling vehicle outright for the past 32. That's quite a legacy, and thus, it's no surprise that Ford worked super-duper-extra hard on creating the all-new, aluminum-bodied 2015 F-150 that debuted at the Detroit Auto Show earlier this year.
During an event at the company's headquarters in Dearborn, MI this week, we were able to see all of the ways that Ford endurance tests, not just the new F-150, but all of its vehicles. From examining things like light exposure to interior materials and paint finishes, to making sure that corrosion absolutely does not happen when steel components come in contact with aluminum panels in the new truck. The goal: ensure that the new F-150 is nothing short of "Built Ford Tough."
But that's only a small part of the story. Of course, the new F-150 has to be able to withstand whatever a pickup buyer might throw at it - and truck buyers arguably demand the most from their vehicles. So in an effort to convey just what the new F-150 had to go through before being given the final go-ahead, Ford has released a series of videos, showing how its new halo truck was indeed torture tested.

Ford gives S-Max the Vignale treatment in Milan

Ford has a bit of a history in reviving the names of old coachbuilders it has long since gobbled up and using them to distinguish its top-of-the-line models in Europe. That's what it did for years with Ghia, and after having replaced it several years ago with the Titanium trim level, now it's doing it again with Vignale.
At the Frankfurt Motor Show last year, Ford revealed the Mondeo Vignale concept in both sedan and wagon body-styles, which are set to reach production next year. But before they do, the Blue Oval automaker is at it again, applying similar upgrades to the S-Max minivan and unveiling it in concept form in Milan this week.
Setting the Vignale concept apart from any other S-Max is its Milano Grigio rose-hued silver pearlescent paint, 21-inch alloys, chrome trim and hexagonal-pattern grille. Inside it's all ultra-soft quilted leather and aluminum trim, with tablet docking stations in the back and thinner, more flexible seats than the existing production version.

2015 Ford Focus Sedan is fresh-faced and ready to defend its Most Popular crown

Ford has made an art of deeper-than-normal midlife updates since the 2010 Fusion, a strategy that has allowed it to keep models looking fresher in showrooms for longer without needing full redesigns. Instead of slight touchups to light fixtures, new paint colors and perhaps new wheel patterns, Ford has been digging deeper, with significant sheetmetal changes and very different front-end looks, along with an increased emphasis on new in-car technologies to keep models vibrant. Other automakers are following this trend, and Ford itself is continuing on the path with this new 2015 Focus Sedan.
There's a handsome new SE Sport Package that includes a firmer touring suspension, modest body kit and 17-inch wheels.
We first saw this sleek Aston Martin-like nose fitted to a Focus at the Geneva Motor Show last month, but Ford only showed the new look on the five-door hatchback - this is the first appearance of the sedan, which will bow at next week's New York Auto Show. The front end treatment is the same, with a new hood, new headlamps incorporating LED accents, a different grille shape and a completely revised lower fascia that does away with the 2014 model's controversial triangle-shaped corners and gaping intakes. The rear gets a new two-piece, laser-brazed trunk lid with new taillamps, but the overall look is quite similar to last year's car. In any case, the refreshed look brings the Focus sedan more in line with the design of Ford's other recently reworked cars, including the Fusion and Fiesta.