2003 Ford F250 4x4 Diesel Power Stroke 6.0 No Reserve Super Duty Xlt Super Cab on 2040-cars

Auto blog

Updated Ford Expedition and Lincoln Navigator caught in new spy photos

Face-lifted Ford Expedition and Lincoln Navigator prototypes were spotted in the wild Monday wearing fairly extensive camouflage disguising updated bodywork for the 2022 model year. Ford's two body-on-frame offerings (BOFferings? Nope. Pretend that didn't happen.) are both due for a nip and tuck, and with GM's fresh slate of full-sizers now available, the timing couldn't be more perfect.  There's not much we can discern from this Navigator prototype. The camo does a good job of masking whatever Lincoln has in store for the nose, but the tailgate has some discernible updates, including a significantly more pronounced recess for the license plate that also appears to be mounted higher on the hatch. This would likely indicate that the rear lighting scheme is getting an overhaul, as there doesn't appear to be enough room between the lower edge of the glass and the plate for the current scheme to be preserved.  The Expedition, on the other hand, has quite a bit going on. For starters, this prototype is not sporting the chrome-and-polish look we've come to associate with these often-blingy SUVs. Instead, we see a set of Goodyear Wrangler all-terrains on what appear to be 18" wheels, which are positively dwarfed by the turbine-style wheels on the Lincolns. Leaning even harder into the off-road theme, this prototype is not wearing the scalloped front air dam seen on other Expeditions. While it may have been removed for testing purposes, its absence (or replacement) would certainly do wonders for the big SUV's approach angle. Elsewhere, we can see what appear to be a new set of tail lights, and it would be safe to assume based on the camo that we'll see new front and rear bumper treatments.  We can also see a bit of the Expedition's interior, and there are quite a few things to note on this front. For starters, the prominent, vertically oriented infotainment screen takes after the Mustang Mach-E's unit. This is significant not only on spec, but also because it signals that the Expedition's interior will be departing more significantly from that of the F-150.  Related Video:

Ford cuts production at 5 plants, has big backload of cars including Mustang

DETROIT — Ford said on Tuesday it plans to idle five North American vehicle assembly plants for a total of 10 weeks to reduce inventories of slow-selling models. The plants affected include three assembly plants in the United States and two in Mexico, the company said in a statement. The vehicle models include the Ford Fusion and Lincoln MKZ midsize sedans, the Ford Focus compact car, the Lincoln Continental and Ford Mustang, Ford Fiesta and the Ford Transit van. Ford said the Cuautitlan assembly plant that builds the Fiesta would be idled for three weeks. The Hermosillo, Mexico plant that builds the Fusion and MKZ and the Flat Rock, Michigan, factory that assembles Continentals and Mustangs will be idled for two weeks each. The Michigan Assembly plant that builds the Focus will be idled for one week, and the Kansas City assembly line that builds Transit vans will be down for two weeks. Ford did not give dates for the temporary shutdowns. The factories involved employ more than 15,000 people, according to Ford's website. The company did not say how many of those workers would face temporary layoffs. As of Sept. 1, Ford had 111 days' worth of unsold Mustangs, 87 days' supply of Fusions, and a 103 days' supply of Transit vans, according to Automotive News. Dealers had enough unsold Lincoln Continentals to last 162 days. Automakers aim for 65 to 70 days of inventory of most models. Ford and rival General Motors have wrestled most of this year to rein in high inventories of passenger cars as consumers have shifted to buying pickup trucks and sport utility vehicles. Production cuts slice into revenue, but also could help the automakers avoid deeper price cuts on vehicles they can sell. Reporting by Joe WhiteRelated Video: Image Credit: Reuters Plants/Manufacturing Ford Lincoln Convertible Coupe Minivan/Van Sedan ford transit inventory flat rock kansas city assembly plant hermosillo

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.