2012 Ford F150 Fx4 4x4 Crew Ecoboost V6 Sunroof Nav 23k Texas Direct Auto on 2040-cars

Auto blog

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford Shelby GT350 Mustang is a track-day weapon with 500 hp

Ford promises more than 500 horsepower and a torque peak above 400 lb-ft.
The wait is finally over. After months of spy shots, rumor and innuendo, Ford has officially pulled the wraps off its new Shelby GT350. Judging by the spec sheet and the promises being made - especially that the Shelby GT350 will be "an all-day track car that's also street legal" - the wait appears to have been worth it.