1999 Ford F150 Lariat 5.4 on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Rare Ford Mustang ASC McLaren is a piece of '80s history

You can't blame the dealer for advertising this oddball convertible as a "Ford Mustang McLaren." The name certainly rolls off the tongue better than "Ford Mustang ASC McLaren," and it makes the car sound a whole lot more appealing. However, without the 'ASC' in there, you don't get the full picture. And when it comes to the world of strange automotive collaborations—particularly those of the 80s—you most definitely want the full picture. ASC McLaren Mustangs were the result of fortuitous timing, and a project that was already underway between the American Sunroof Company and McLaren (no, not that McLaren). Detroit custom car builder Peter Muscat brought the idea of a Mustang with a tonneau cover to ASC after chopping the top off a Fox body on his own, and in turn ASC founder Heinz Pretcher brought the concept to Ford. Big blue was already in the midst of relaunching a Mustang convertible, which had been absent from the lineup for 10 years, so initially it was the Mercury Capri that got the ASC/McLaren treatment. The result was a car that was more expensive than a Mustang GT, and coupled with declining sales of the Capri overall, the car was discontinued in 1986, paving the way for the ASC McLaren Mustang you see here on eBay. With the change over to the Mustang as their platform for modification in 1987, ASC McLaren were given the opportunity to create something notable. Customizing the Capri was one thing, but the Mustang name carries with it iconic status. So what did ASC McLaren do with their chance to leave their mark on automotive history? They gave the car some visual modifications, both inside and out, but like the Capri, left the powertrain untouched. Also like the Capri, the cars still ended up costing more than $20,000. Between the high price, the economic woes of the late 80s, and disputes between Muscat and Pretcher, the ASC McLaren Mustangs were no more by 1990. During the three year run, 1,806 ASC McLaren conversions were completed, making them quite rare, especially low mileage examples like this one. The 5.0 V8s are known for being stout engines, capable of handling serious modification, and logging lots of miles, so there are no concerns there. The 5-speed Borg-Warner transmission that came in all Mustang GTs is also known for being a durable unit, the '87-'90 versions especially so. The main concern here would be the life the car has lived, and more importantly where it has lived.

Saab-powered Ford is the most unlikely drift car we've seen

Yes, you read that headline correctly. It's supposed to be a Saab-powered Ford, and not the other way around (although we fully support the notion of a Sonnet with a Flathead V8). Apparently, some lunatic in the UK took an ass-less 1953 Ford Anglia, paired it with a turbocharged Saab engine, and tuned the entire thing to go drifting. We like it. Called Urchfab, it's the subject of Carfection's (the blokes formerly known as XCar) latest video. Aside from looking like an extra from the British version of Mad Max, it has a problem with grip, in that there's just too much of it. This car is a fabber's dream, as we get to see its unnamed owner fashion new bits and bobs for the suspension before having an unfortunate encounter with a wall at Castle Combe. You can check out the full video up at the top of the page for a closer look at this monstrous Anglia. Related Video: