2006 Ford Expedition Xlt Sport Utility 4-door 5.4l on 2040-cars

Auto blog

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.

Car Stories: Owning the SHO station wagon that could've been

A little over a year ago, I bought what could be the most interesting car I will ever own. It was a 1987 Mercury Sable LS station wagon. Don't worry – there's much more to this story. I've always had a soft spot for wagons, and I still remember just how revolutionary the Ford Taurus and Mercury Sable were back in the mid-1980s. As a teenager, I fell especially hard for the 220-horsepower 1989 Ford Taurus SHO – so much so that I'd go on to own a dozen over the next 20 years. And like many other quirky enthusiasts, I always wondered what a SHO station wagon would be like. That changed last year when I bought the aforementioned Sable LS wagon, festooned with the high-revving DOHC 3.0-liter V6 engine and five-speed manual transmission from a 1989 Taurus SHO. In addition, the wagon had SHO front seats, a SHO center console, and the 140-mph instrument cluster with mileage that matched the engine. When I bought it, that number was just under 60,000 – barely broken in for the overachieving Yamaha-sourced mill. The engine and transmission weren't the only upgrades. It wore dual-piston PBR brakes with the choice Eibach/Tokico suspension combo in front. The rear featured SHO disc brakes with MOOG cargo coils and Tokico shocks, resulting in a wagon that handled ridiculously well while still retaining a decent level of comfort and five-door functionality. I could attack the local switchbacks while rowing gears to a 7,000-rpm soundtrack just as easily as loading up on lumber at the hardware store. Over time I added a front tower brace to stiffen things a bit as well as a bigger, 73-mm mass airflow sensor for better breathing, and I sourced some inexpensive 2004 Taurus 16-inch five-spoke wheels, refinished in gunmetal to match the two-tone white/gunmetal finish on the car. That, along with some minor paint and body work, had me winning trophies at every car show in town. And yet, what I loved most about the car wasn't its looks or performance, but rather its history. And here's where things also get a little philosophical, because I absolutely, positively love old used cars. Don't get me wrong – new cars are great. Designers can sculpt a timeless automotive shape, and engineers can construct systems and subsystems to create an exquisite chassis with superb handling and plenty of horsepower. But it's the age and mileage that turn machines into something more than the sum of their parts.

For thousands of US auto workers, the downturn is already here

LORDSTOWN, Ohio - Wall Street is fretting that the auto industry is heading for a downturn, but for thousands of workers at General Motors factories in the United States, the hard times are already here. Matt Streb, 36, was one of 1,200 workers laid off on Jan. 20 - inauguration day for President Donald Trump - when GM canceled the third shift at its Lordstown small-car factory here. Sales of the Chevrolet Cruze sedan, the only vehicle the plant makes, have nosedived as consumers switch to SUVs and pickup trucks. Streb is looking for another job, but employers are wary because they assume he will quit whenever GM calls him back. "I get it," said Streb, who has a degree in communications, "but it's frustrating." Layoffs at Lordstown and other auto plants point to a broader challenge for the economy in Midwestern manufacturing states and for the Trump administration. "This is about economics, not what Trump says. Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." The auto industry's boom from 2010 through last year was a major driver for manufacturing job creation. The fading of that boom threatens prospects for US industrial output and job creation that were central to Trump's victory in Ohio and other manufacturing states. "This is about economics, not what Trump says," said Robert Morales, president of United Auto Workers (UAW) union Local 1714, which represents workers at GM's stamping plant at Lordstown. "Even if Trump went out and bought 10,000 Cruzes a month, he wouldn't get the third shift back here." Last week the Federal Reserve said factory output fell 0.4 percent in May, the second decline in three months, due partly to a 2 percent drop in motor vehicles and parts production. Mark Muro, a senior fellow at the Brookings Institution, has compiled data from government sources that show the auto industry punching higher than its weight in job creation in recent years - accounting for between 60 percent and 80 percent of all US manufacturing jobs added in 2015 and 2016. In the first quarter of this year, the auto industry accounted for less than 2 percent of the 45,000 manufacturing jobs created. "There's no argument with the idea that auto has been pulling the manufacturing sled up the mountain for the last three or four years," Muro said.