2007 Ford Crown Victoria Police Interceptor, Unmarked, Low Miles, Low Hours!!! on 2040-cars
Canal Winchester, Ohio, United States
|
This is one of the nicest examples of it's kind available anywhere. This is a beautiful car that is absolutely as nice underneath as it is on top. It is finished in Formal Black Clearcoat, one of the most desirable colors available on the Crown Victoria. If you are searching for the ultimate Crown Victoria Police Interceptor, here you go...
You are viewing a very low-mileage, extremely low idle hours, always unmarked, loaded 2007 Ford Crown Victoria Police Interceptor with the coveted "Street Appearance Package". Recently out of service from United States Federal Government, Federal Bureau of Investigation, where it was assigned to one agent for it's entire life, with only 24,936 actual, documented miles and 256 idle hours on it. This is a beautiful example of a very rare, hard to find car in the most "in-demand" color. The original finish is excellent and this vehicle has an absolutely spotless Carfax report. It has never been involved in any accidents and has never had any paintwork or damage repaired. This unit has never had a spotlight, light bar, decals or antennas installed anywhere. It has no holes drilled anywhere in the body and has never been in regular police service. This unit includes all of the options you would expect...power heated mirrors, daytime running lights, factory auxiliary police dome lamp, factory AM/FM/CD stereo, driver and passenger side airbags, cruise control, cloth front bucket seating with cloth rear bench seat, full-factory carpeting w/matching factory carpeted floor mats and a 3.27 ratio rear differential w/traction control. These items, of course, are just the beginning of the list of equipment on this car. In my years of buying and selling police vehicles, I have had very few cars that come close to the condition of these units, they are extremely well maintained, actually over-maintained, and typically need no repairs. This was a one-driver car, assigned to one federal agent throughout the entire life of the car. For those of you who know, that makes all of the difference in the world when it comes to how the cars are maintained and treated. It has NEVER been smoked in, looks as close to new as you will find and has virtually zero wear on the interior, even on the seating. The rear seat appears to have never been used. All of the factory manuals are included with the vehicle, and are in place in the glove box. The trunk compartment is extremely clean, and the original full size spare tire is in place. This unit is also equipped with, of course, the full "Police Interceptor" package which includes the 4.6-liter H.O. engine, 4-speed overdrive heavy-duty transmission, 3.27 rear axle, lateral bow (roof) reinforcement, Good Year Eagle RS-A 235-55-17 police-spec, ultra-high performance radials mounted on the factory, heavy-duty, 17" vented police wheels with full, factory deluxe wheel covers, stainless-steel dual exhaust with factory crossover pipe, police-only lightweight balanced aluminum driveshaft, special police-spec heavy-duty frame, 4-wheel disc brakes, severe-duty suspension, heavy-duty cooling, lamp pre-wire group, certified 140-mph speedometer, tachometer, idle hour meter and much, much more. For those of you who know Crown Victorias, you are probably already aware that the 2004-2011 models are the years to have...2004 was the first year for the higher-horsepower engine. All Crown Victorias produced from 2004-onward utilized the new, improved, 250-horsepower 4.6 liter V8 engine and are the fastest Crown Victorias produced due to many changes that were made, mainly in the intake system. Previously, the Police Interceptor produced 239 horsepower, but the 2004-newer Police Interceptor increased that number to 250 horsepower due to the addition of a new "Marauder" air intake setup. This included a new airbox that resembles the Mercury Marauder airbox (raised airbox lid, deeper bottom), with a new, larger, integrated 80 mm (3.1 in) mass airflow (MAF) sensor that is part of the airbox lid. This allows for much more precise flow calibration and reduces the chances of air leakage. The P71 zip tube (the flexible rubber hose between the throttle body and MAF outlet) is also used to reduce NVH (noise, vibration, and harshness) as well as transfer air from the airbox to the throttle body with minimal flow resistance. Crown Victorias like this one are becoming nearly extinct, so here's your opportunity if you've been looking for one of the nicest you will find in a rare and desirable color combination with ultra-low mileage and ultra-low idle hours. This unit is gorgeous inside and out and is clean under the hood as well...the engine compartment is very nice (please see the pictures). I do not slather motors with Armor All to make them appear nicer, or newer, than they are. The picture of this engine compartment is exactly as it was when the car was purchased...extremely clean. These are the Crown Victorias aficionados lust after, and this is an unmolested example. It is very responsive, smooth-shifting and, of course, very fast. This unit is in excellent overall condition, has been very well-maintained and has little of the normal wear and tear you would expect to find on a used police vehicle. This vehicle, as most used police vehicles do, will have imperfections...this typically includes; scratches, chips, nicks, minute small dents and dings, etc....that being said, this car has no known mechanical defects and it runs and drives excellent. Please, keep in mind, we strive to find the nicest used vehicles possible, but they are still used vehicles. This 2008 Ford Crown Victoria Police Interceptor will sell to the high bidder at the end of the auction, providing the reserve is met. Please complete all inspections BEFORE bidding...if you win the auction, you own the vehicle. I am a law-enforcement officer as well and as such, work long hours so you are free to call me as late in the evening as you like. I can be reached anytime at (614) 893-3857. I will take calls 24/7 up until the end of the auction. |
Ford Crown Victoria for Sale
2007 ford crown victoria police interceptor sedan a/c 4-spd auto 4.6l v8 power
2006 ford crown victoria police interceptor sedan a/c 4-spd auto 4.6l v8 power
2005 ford crown victoria police interceptor street appearance package(US $10,000.00)
2008 ford crown victoria police interceptor sedan 4-door 4.6l(US $1,900.00)
2001 ford crown victoria police interceptor sedan 4-door 4.6l(US $3,500.00)
Ford crown victoria police interceptor! nice and clean with low hours!(US $7,300.00)
Auto Services in Ohio
Zig`s Auto Service Inc ★★★★★
World Auto Network ★★★★★
Woda Automotive ★★★★★
Wholesale Tire Co ★★★★★
Westway Body Shop ★★★★★
Toth Buick GMC Trucks ★★★★★
Auto blog
Road & Track samples rare 1995 Ford Mustang Cobra R
Sat, Jun 6 2015The modern performance variant of the Ford Mustang enjoys a long, illustrious history. While well-known examples like the Boss 302, Shelby GT350, and Shelby GT500 get all the attention, the modern versions of these cars may not have been possible had it not been for the three generations of the Cobra R, sold in 1993, 1995, and 2000. Limited to just 250 examples, the second-generation model wasn't as rare as the Fox-body Cobra R that preceded it, but they were still pricey and difficult to acquire. Customers were required to hold a competition license in order to take delivery, and prices were roughly equivalent to $59,000 in today's money. As Road & Track tells it, neither of those facts were a handicap – Ford sold its entire roster of 1995 Cobra Rs in just five days. RT's Jack Baruth managed to score a drive in an extremely low-mileage example of this now-vintage track star. He delivers an interesting look into the way a performance car from two decades ago behaves in today's world, and finds that despite its age, the 1995 Cobra R is still "a true sweetheart." Check out the full feature over at Road & Track. Related Video:
Ford Q3 pretax profits drop to $1.18B
Fri, 24 Oct 2014Following positive third quarter financial results recently from General Motors, rival Ford took a tumble in Q3. The automaker posted pre-tax profits of $1.18 billion, compared to about $2.59 billion in Q3 2013, a drop of around 54 percent. Net income also suffered with $835 million made in the quarter, versus $1.272 billion last year, a decline of about 34 percent. The Blue Oval blamed the gloomy figures on three reasons in its release: "lower volume, higher warranty costs and adverse balance sheet exchange effects."
There were problems of one kind or another in practically every region. North America experienced higher warranty costs than expected, partially due to recalls. The sales volume for the quarter was 665,000 units, versus 725,000 in Q3 2013, and pre-tax results amounted to $1.41 billion versus $2.296 billion last year.
South America and Europe both posted worse pre-tax results than last year. On the bright side, European volume was up slightly to 321,000 vehicles, from 303,000 in Q3 2013. The Middle East and Africa also lost $15 million, but that was an improvement compared to the $25 million loss previously experienced in this region.
Trump did talk to Bill Ford, but the Kentucky plant was never moving to Mexico
Fri, Nov 18 2016President-elect Donald J. Trump has been butting heads with Ford for a while now. A lot of it seems to stem from misunderstanding or misrepresenting facts about how the automaker currently does business and its plans for the future. After a sit-down with executive chairman Bill Ford Jr., the misunderstandings continue, but Trump has apparently convinced the company to make some changes. During his campaign, Trump claimed that Ford was going to fire US workers and move manufacturing to Mexico. That wasn't the case – yes, Ford planned to transfer Focus and C-Max production from Wayne, Michigan, to Cuautitlan, Mexico, but no, that wouldn't mean anyone losing their job. The Wayne plant will continue to operate, and likely busier than before, as it will be the home of the new Bronco and Ranger. So Ford CEO Mark Fields responded with the facts, and then chairman Bill Ford Jr. sat down with Trump over the summer. Things apparently weren't resolved to Trump's satisfaction, so he and Bill Ford spoke on the phone yesterday as he claims in this tweet: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Let's pick that apart. First off, it's not a Lincoln plant, per se – the Louisville Assembly Plant currently builds the Ford Escape and Lincoln MKC, two small crossovers that share a platform. Ford was considering moving MKC production out of Kentucky to Mexico, but it would not have resulted in many lost jobs if any – the union had already agreed to moving the MKC in 2015 negotiations, and taking production of the slow-selling Lincoln out of the plant would open up capacity for more Fords. Be that as it may, Ford has decided not to move MKC production out of the plant, either for political reasons of placation or because it didn't make the greatest deal of business sense, maybe a combination of the two. That means Trump isn't really saving any American jobs in the short term. If anything, this move could keep Ford supply-constrained and result in reduced sales, which in turn brings the company less money and affects the bottom line and all employees. But that's speculation, so we won't tweet it. There is of course the possibility that Ford will be convinced, either by sheer will or by a more attractive trade situation, to invest in increased US production, which could bear fruit later on. We are told by Ford that the two men did in fact speak yesterday.























