Find or Sell Used Cars, Trucks, and SUVs in USA

1972 Ford Bronco Project With Lots Spent Look! on 2040-cars

US $7,500.00
Year:1972 Mileage:52000
Location:

Ward, Arkansas, United States

Ward, Arkansas, United States
Advertising:

1972 FORD BRONCO "PROJECT" this bronco has a very nice paint job that has a show car finish! all base coat clear coat and has been painted appx.3 years ago. been inside shop i started this project and never finished it. it  has new 4" suspension lift with new front and rear springs and 4 shocks and all c bushings and radis bushings been replaced it has a completely rebuilt disk brake front end out of 1977 and a big bearing rear end out of same 1977. front floor pans have only been patched where floor pan turns up was only broke not rusty does not have rust in normal places all door jams are clean and under hood on inner fenders are clean. has some small pits in rear floor towards the back only and not rusted out can be cleaned and painted! i put new red letter 35x12.50x15 general grabbers on 15x10 procomp aluminum wheels to match the rig! all wireing is in the dash and body.no motor or trans or any other parts other than glasses for the top included!no steering no seats just what you see in pictures! very nice starter bronco with all parts painted ready for your motor and stuff! build like you want!please look at all pictures please ask questions if needed!threw email or can call me at (501)-940-1213 i want a 500.00 non refundable deposit 24 hours after auction and balance 7days! no exceptions! also i reserve the right to end at anytime thanks!!

Auto Services in Arkansas

Tint Pro & Accessories ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Window Tinting
Address: 2900 Towson Ave, Bonanza
Phone: (866) 595-6470

Tim`s Auto Body ★★★★★

Automobile Body Repairing & Painting, Towing, Truck Service & Repair
Address: 17 Fayetteville St, Van-Buren
Phone: (479) 474-2100

Swain`s Service Center ★★★★★

Auto Repair & Service
Address: 3214 Bernice Ave, Dardanelle
Phone: (479) 968-4931

Seeburg Muffler & Brake ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Oil & Lube
Address: 2880 W Walnut St, Tontitown
Phone: (479) 636-6900

Seeburg Muffler & Brake ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 1599 N College Ave, Prairie-Grove
Phone: (479) 442-4242

River City Motors II ★★★★★

Used Car Dealers
Address: 3030 Thomas St, Marion
Phone: (901) 358-9000

Auto blog

Ford's China sales keep falling, down 30% in third quarter

Fri, Oct 11 2019

BEIJING — Ford's July-to-September vehicle sales in China fell 30%, as the U.S. automaker continued to lose ground in a prolonged sales decline in its second biggest market. The Dearborn, Michigan-based automaker delivered 131,060 vehicles in China in the third quarter, Ford said in a statement. Ford's sales in China fell 35.8% in the first quarter and by 21.7% in the second quarter. In the third quarter, sales of the automaker's mass-market Ford brand fell 37.7%, while its luxury division Lincoln saw sales drop by 24.1%. It delivered around 421,000 vehicles in the first nine months of the year, according to Reuters calculations. Ford has been struggling to revive sales in China after its business began slumping in late 2017. Sales sank 37 percent in 2018, after a 6 percent decline in 2017. The automaker plans to launch more than 30 new models in China over the next three years, of which more than a third will be electric vehicles. It also said it would localize management teams by hiring more Chinese staff and aimed to improve relationships with joint venture partners. Ford has launched a series of new models in the third quarter in China, including Focus, Edge, and the electric Territory. In China, Ford makes cars through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors. It has said it would partner with Zotye Automobile Co to sell lower-priced cars, but there seems to have been little progress. In a series of moves, Ford named a new president for its main local venture, Changan Ford, in August and said it would enhance its partnership with Changan through research, production and marketing cooperation in September. Ford is also planning to revamp some of its existing manufacturing facilities with Changan to localize production of its premium brand Lincoln. Changan Ford's sales down by around 33.5% in the third quarter, according to Reuters calculations based on Changan's filings. Ford rival General Motors' July-to-September vehicle sales in China fell 17.5%, to 689,531 vehicles. As GM and Ford China sales extend declines, U.S. car companies' market share of total China passenger vehicle sales fell to 9.5% in the first eight months of this year, from 10.7% in the year-ago period, according to the China Association of Automobile Manufacturers (CAAM). Over the same period, German carmakers' share has risen to 23.8% from 21.6%, and Japanese automakers' share rose to 21.7% from 18.3%.

Why the Detroit Three should merge their engine operations

Tue, Dec 22 2015

GM and FCA should consider a smaller merger that could still save them billions of dollars, and maybe lure Ford into the deal. Fiat-Chrysler CEO Sergio Marchionne would love to see his company merge with General Motors. But GM's board of directors essentially told him to go pound sand. So now what? The boardroom battle started when Mr. Marchionne published a study called Confessions of a Capital Junkie. In it, Sergio detailed the amount of capital the auto industry wastes every year with duplicate investments. And he documented how other industries provide superior returns. He's right, of course. Other industries earn much better returns on their invested capital. And there's a danger that one day the investors will turn their backs on the auto industry and look to other business sectors where they can make more money. But even with powerful arguments Marchionne couldn't convince GM to take over FCA. And while that fight may now be over, GM and FCA should consider a smaller merger that could still save them billions of dollars, and maybe lure Ford into the deal. No doubt this suggestion will send purists into convulsions, but so be it. The Detroit Three should seriously consider merging their powertrain operations, even though that's a sacrilege in an industry that still considers the engine the "heart" of the car. These automakers have built up considerable brand equity in some of their engines. But the vast majority of American car buyers could not tell you what kind of engine they have under the hood. More importantly, most car buyers really don't care what kind of engine or transmission they have as long as it's reliable, durable, and efficient. Combining that production would give the Detroit Three the kind of scale that no one else could match. There are exceptions, of course. Hardcore enthusiasts care deeply about the powertrains in their cars. So do most diesel, plug-in, and hybrid owners. But all of them account for maybe 15 percent of the car-buying public. So that means about 85 percent of car buyers don't care where their engine and transmission came from, just as they don't know or care who supplied the steel, who made the headlamps, or who delivered the seats on a just-in-time basis. It's immaterial to them. And that presents the automakers with an opportunity to achieve a staggering level of manufacturing scale. In the NAFTA market alone, GM, Ford, and FCA will build nearly nine million engines and nine million transmissions this year.

Project Ugly Horse: Part VI

Thu, 21 Mar 2013

Solid axle? What solid axle?
I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation.
This should not have gone this easily. Having a long and checkered history of simple projects punctuated by much wailing and gnashing of knuckles, I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation when I finally decided to lay hands on the '89 Mustang with the goal of relieving the car of its stock rear axle. Instead, it took less than a full morning's worth of work to carve the old 7.5-inch solid axle from its moorings and mock up something, well, different.