1986 Ford Thunderbird Base Sedan 2-door 3.8l on 2040-cars

Auto blog

Ford fixing 130k vehicles in three recalls

Ford is issuing three new safety campaigns that cover a total of 130,801 vehicles in North America, but the company has no reports of accidents, injuries, or fires from any of these issues. The largest of these campaigns covers 128,823 examples of the 2009-2010 Ford Edge and Lincoln MKX that are currently registered or originally sold in rust-prone areas of North America, including 110,636 in the US. On these crossovers, "corrosion under the reinforcement brackets where the fuel tank is mounted" can potentially result in a fuel leak. To fix the issue, dealers will inspect the tank and will repair or replace it as necessary. The affected locations are: Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin; and the Canadian provinces of New Brunswick, Newfoundland and Labrador, Nova Scotia, Ontario, Prince Edward Island, and Quebec. Ford is also recalling 1,906 North American examples of the 2016 Mustang, including 1,900 in the US, because of possible damage to some components during shipping to the factory. On the affected pony cars, "dealers will replace front and rear seat belt assemblies, rear seat buckle assemblies, and child tethers," the company says in its statement. Finally, the smallest campaign is for 72 units of the 2016 Ford E-Series cutaway and chassis cab in North America, including 65 in the US. On these, the trailer brakes don't activate when pressing the brake pedal, and dealers need to update the powertrain control module software. Related Video: FORD ISSUES TWO SAFETY RECALLS AND ONE SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., Oct. 28, 2015 – Ford Motor Company is issuing two safety recalls and one safety compliance recall in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford Motor Company issues safety recall for certain 2009-2010 Ford Edge and Lincoln MKX vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 129,000 2009-2010 Ford Edge and Lincoln MKX vehicles in corrosion states and provinces in North America for possible corrosion under the reinforcement brackets where the fuel tank is mounted to the vehicle.

How the 2015 Ford Mustang will save your knees

The 2015 Mustang is one of the most hotly anticipated vehicles of the moment, and Ford continues to leak out interesting little details about its newest pony car. The latest info doesn't have anything to do with its quarter-mile time or handling, but if any of that goes drastically wrong, the innovative new glovebox-mounted airbag may prevent passengers from knee injuries.
All variants of the 2015 Mustang get the active knee airbag as standard, and it's the first vehicle in Ford's lineup to receive the system. The setup is actually quite simple and ingenious. The glovebox is made from a plastic outer panel that is attached to the inner door. Sandwiched between them is this new injection-molded plastic bladder that folds flat when in use. If the passenger-side airbag deploys, the system springs into action to act as a cushion for your knees. Compared to a traditional knee airbag that has to fully inflate, this arrangement is 65 percent lighter and can use a 75 percent smaller inflator. It's also basically invisible when you look at the glovebox door.
Ford spokesperson Ed Saenz declined to tell Autoblog whether the system will appear in other vehicles in the Blue Oval's lineup but said, "We're considering other applications." Provided it's effective, the approach seems too simple not to make its way to other products. Scroll down to watch a video showing how the glovebox-mounted knee airbag works.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.