Find or Sell Used Cars, Trucks, and SUVs in USA

1957 Ford Thunderbird Convertible #s Match 2 Tops P/s P/b A/c Restored! on 2040-cars

Year:1957 Mileage:96853 Color:  White
Location:

Queens, NY, United States

Queens, NY, United States
Advertising:
Transmission:AUTOMATIC
Body Type:Convertible
Vehicle Title:Clear
Engine:312ci 245hp 4bbl. V8
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: D7FH194668 Year: 1957
Model: Thunderbird
Trim: CONVERTIBLE
Options: Convertible
Drive Type: REAR WHEEL DRIVE
Power Options: POWER STEERING, POWER BRAKES, Air Conditioning
Mileage: 96,853
Sub Model: WATCH VIDEOS!
Interior Color: White
Warranty: Vehicle does NOT have an existing warranty
Number of Cylinders: 8
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

HERE IS A GORGEOUS BODY-ON RESTORED HIGH-END DRIVER IN THIS 1957 FORD THUNDERBIRD CONVERTIBLE WITH MATCHING NUMBERS 312CI/245HP MOTOR AND AUTOMATIC TRANSMISSION IN A STUNNING COLOR COMBINATION THAT IS TURN-KEY AND READY TO DRIVE ANYWHERE!

Please e-mail me with questions or to set up an inspection to see the car in person. AUCTION MAY BE STOPPED AT ANY TIME. 

Vehicle came out of Auburn Indiana. Previous owner had done a recent body-on restoration on the vehicle, which included paint/bodywork, new chrome bumpers, new interior, new convertible top, new whitewall tires, new gas tank and tons more. This is a RUST-FREE CAR that is turn-key and ready to drive anywhere.

OPTIONS:

Power steering

Power brakes

Vintage Air Conditioning

Two Tops (porthole hardtop in white, and convertible top)

#s Matching 312ci/245hp V8 motor

Automatic transmission

Whitewall tires

Under the hood lies a virtually all stock and unmodified 312ci motor with factory 245hp. Meticulously serviced throughout its life. Mechanically it fires right up and sounds great along with the nice and throaty exhaust system. Transmission is solid and shifts good without any noises or grinding. I drive the car about once every other week for short trips around down or every once in a while I'll take it to a cruise night on the highway. It has never let me down and always performs great. 

Interior is basically all stock and COMPLETELY REDONEDoor panels in excellent shape. Dash is very clean (has carpeted dash cover in pictures, but clean underneath with some glue strips on it). Seats in excellent shape throughout. Nice carpet. Overall beautifully presentable for a high end driver.

EXCELLENT CHROME throughout (front and rear bumpers were rechromed and look great).

Underside has a SOLID frame with NO rot or major rust other than some on the surface. Floors appear very nice. Trunk pan looks very good as well.

The old girl is NOT perfect by any means of course so please keep that in mind when bidding. Paint is in VERY GOOD shape throughout, and although it looks fairly good with plenty of shine, it has various small chips, and one 2" hairline crack by front passenger wheel well. Not working: wipers (NEW motor included but not yet installed), may need a couple of bulbs replaced here and there, a/c could use recharge/service. Brakes work fine but steers to the right when braking hard (most likely worn wheel cylinder, which I will have my mechanic replace before auction ends if I get to it). Missing: one rear wheel skirt. Two smaller gauges from dash cluster were removed and rebuilt, not yet reinstalled (they are included of course). NEW weatherstripping and window felt strips are included with the car, but not yet installed. Convertible top canvas has two tiny holes from being "pinched" behind the seat when stored.

So overall she is not perfect and will need some form of very minor TLC depending on how nice you want it to be and what you plan to do with the car. Please note, I cannot remember every single issue with the car, nor do I know everything wrong with it, as it is after all over 60 years old so keep that in mind.

If you just want a GREAT LOOKING TURN-KEY DRIVER then this is the car for you. If you want a show car, it will need some work to bring it up to that level of course. I ENCOURAGE ANYONE BIDDING OR SERIOUSLY INTERESTED TO COME LOOK AT IT IN PERSON. I WILL BE GLAD TO SHOW IT TO YOU TOP TO BOTTOM SO YOU KNOW EXACTLY WHAT YOU'RE GETTING INTO.

Auction Rules:

We would like to encourage you to Please follow our rules of the auction and refrain from creating your own! All inspections must be completed prior to auction close. Winning bidder will provide a $1000 deposit within 48 hrs of auction close. Remaining Balance will be paid in full within 7 days of Auction close. All vehicles must be removed within 14 days of Auction close, After such time a $20 a day storage fee will be applied. All vehicles are sold AS/IS please review our warrenty policy below.

Warranty Information
 

This vehicle is being sold as is, where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle.

Terms and Conditions
 

Cash (in person) is preferred. Bank Wire transfer is acceptable, as well as a cashier's check (MUST clear in full before vehicle is released). $1000 non-refundable deposit within 48 hours.


Auto Services in New York

Tones Tunes ★★★★★

Auto Repair & Service, Window Tinting, Glass Coating & Tinting
Address: 924 W Jericho Tpke, Greenlawn
Phone: (631) 864-8663

Tmf Transmissions ★★★★★

Auto Repair & Service, Auto Transmission, Auto Transmission Parts
Address: 1805 Tebor Rd, Ontario-Center
Phone: (866) 595-6470

Sun Chevrolet Inc ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 104 W Genesee St, Chittenango
Phone: (315) 687-7231

Steinway Auto Repairs Inc ★★★★★

Auto Repair & Service
Address: 2305 Steinway St, New-Hyde-Park
Phone: (718) 545-6129

Southern Tier Auto Recycling ★★★★★

Automobile Parts & Supplies, Radiators Automotive Sales & Service, Automobile Accessories
Address: 1225 Coon Hollow Rd, Big-Flats
Phone: (607) 962-7995

Solano Mobility ★★★★★

Automobile Parts & Supplies, Wheelchair Lifts & Ramps, Wheelchairs
Address: Cold-Spring
Phone: (866) 511-6940

Auto blog

How the Ford F-150 SVT Raptor became a reality

Wed, 01 May 2013

The camouflaged Ford F-150 SVT Raptor prototype captured above blazing its way across the desert during a test run left company engineers giggling in amazement, reveals Jamal Hameedi in a new Autoweek video. Ford's global performance vehicle chief engineer, accompanied by senior exterior designer Bruce Williams, sat down with the publication to discuss the concept and development of the automaker's super off-road F-150.
Designing a high-performance pickup in 2008, right when the cost of gasoline was going through the roof, seemed insane at the time, but the team pushed forward with the innovative vehicle regardless. The interview includes plenty of Ford B-roll footage as visual candy, and the conversations include discussions about exterior design, ride comfort, anti-lock brake tuning, suspension engineering, weight reduction and why it was necessary to make the Raptor visually different than Ford's standard F-150. The model's origin story is very interesting, and you can learn more about it by watching the video below.

Ford says 70% of its models to get stop-start by 2017

Sun, 15 Dec 2013

Ford is following up on a report we posted a few weeks back that the Blue Oval would be adding stop-start technology to its entire model range. Now, the Dearborn-based automaker has announced that the fuel-saving feature would be available on 70 percent of the company's range by 2017.
Ford claims the technology will improve fuel economy by around 3.5 percent, although its actual effect will vary based on how the owner drives - apparently up to a 10-percent improvement is possible for those who sit in heavy traffic (Los Angelenos, this means you). The latest recipient of the technology is the updated 2014 Ford Fiesta with the company's three-cylinder EcoBoost powerplant.
Part of the reasoning for the new addition has to do with cost. Ford claims the tech is affordable and easy to implement. "Simply put, Auto Start-Stop helps customers use less fuel, which is an important component of Ford's Blueprint for Sustainability," Ford's global powertrain vice president, Bob Fascetti, said.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Thu, 13 Feb 2014

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.