2009 Ford Ranger Xl Standard Cab Pickup 2-door 2.3l * Gas Saver! Runs Great!! on 2040-cars

Auto blog

Ford pulling out of V8 Supercars after 2015

Australian racing fans are staring down the end of an era as news breaks that Ford will no longer participate in the V8 Supercars series. Although the official announcement has yet to be made, the decision – as reported widely in the automotive press Down Under and in global motorsport publications – indicates that the Blue Oval automaker has already confirmed its intentions to its shareholders early on Monday to shut down its factory effort in the popular tin-top series at the end of next season. The move will mark the end of an era for what has become the International V8 Supercars Championship. Alongside GM's Holden division, Ford was one of only two manufacturers competing in the series from its inception in the late 1990s through last year when a change in regulations opened the door for entries from Nissan, Volvo and Mercedes. Further rule changes are expected to attract even more manufacturers to the series, with Lexus said to be first among them. Over the past eighteen seasons, the V8 Supercars Championship has been won in a Holden Commodore fourteen times, leaving Ford to win the title only four times with successive versions of the Falcon. Eleven of the cars on the grid this season were Commodores, compared to only seven Ford Falcons between two teams that will need to switch to another manufacturer for the season after next – although some could opt to stick with their Fords for one more season, even without factory support, until the open 2016 regulations take effect. The decision follows Ford's announcement last year that it will cease manufacturing in Australia by 2016, ending a 90-year presence Down Under that stretches back to 1925. Blue Oval models like the Falcon, previously unique to the Aussie market, are being replaced by imported models like the Mondeo and Mustang.

Ford announces two recalls, 442k vehicles affected in North America

Ford is announcing two recalls for North American that affect a total of 442,300 vehicles and multiple model lines. The larger campaign covers the possibility of electric power steering systems that can fail in the 2011-2013 Ford Flex, Taurus, Lincoln MKS, and MKT; the 2011-2012 Ford Fusion and Lincoln MKZ; and the 2011 Mercury Milan. This recall affects 422,814 vehicles in North America, including 393,622 in the United States, 25,195 in Canada, and 3,997 in Mexico. According to the company, an intermittent electrical connection can cause the power steering to cut out, although manual steering would still work. Ford knows of four minor accidents from this issue, but there are no injuries. Depending on trouble codes from the vehicle, dealers will either upgrade software for the power steering control module or replace the steering gear. The second recall covers 19,486 examples of the 2015 Ford Mustang with the 2.3-liter EcoBoost turbocharged four-cylinder engine with a production date between February 14, 2014, and February 10, 2015 at the Flat Rock Assembly Plant. Specifically, there are 19,095 of these in the US and 391 in Canada. These pony cars can show elevated underbody temperatures, which can lead to degradation of the fuel tank, fuel vapor lines, and parking brake cable seals. There are no reports of accidents, injuries or fires from this, though. To fix things, dealers will install a better-insulated fuel tank shield, add thermal patches around the tank and parking brake cable, and put thermal wraps around the fuel vapor lines. You can read the specific build dates and locations for the models affected by the power steering issue in Ford's press release below the video. Related Video: FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., May 27, 2015 – Ford is issuing two safety recalls in North America. Four minor accidents and no injuries are attributed to one of these conditions.

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.