Ford Pinto, page #44

Auto blog

NHTSA investigating 500k Ford and Mercury cars for lighting failures

The Ford Crown Victoria and Mercury Grand Marquis might be long gone as new models in showrooms, but the National Highway Traffic Safety Administration might check them out yet again for a potential problem. At the urging of North Carolina Consumers Council, the agency may open another investigation into the front lighting control module on vehicles from the 2003-2005 model years, and NHTSA estimates the issue could affect 517,945 vehicles. If the module stops working, it can cause a complete failure of all forward lighting, including the headlights. NHTSA previously investigated the issue in 2008 and 2009 but found no need for a recall, according to Bloomberg. Ford also extended the warranty on the part to 15 years or 250,000 miles. To prompt this new request, the North Carolina Consumers Council received a letter from a woman experiencing the module's failure. Upon further investigation, the council found 604 complaints of this problem on NHTSA's website, including seven crashes. Furthermore, the group has alleged that dealers told customers that the parts to perform the replacement weren't available, despite the extended warranty. According to the government agency, "A defect petition has been opened to evaluate the issue and make a grant or deny decision." Ford spokesperson Kelli Felker tells Autoblog via email, "We will cooperate with NHTSA, as we always do." You can read the council's complete letter to the Feds in PDF format, here. INVESTIGATION Subject : Loss of headlamp/exterior lighting Date Investigation Opened: APR 01, 2015 Date Investigation Closed: Open NHTSA Action Number: DP15002 Component(s): EXTERIOR LIGHTING All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD CROWN VICTORIA 2003-2005 MERCURY GRAND MARQUIS 2003-2005 Details Manufacturer: Ford Motor Company SUMMARY: The Office of Defects Investigation (ODI) has received a petition from the North Carolina Consumers Council, Inc. requesting a defect investigation of an alleged defect condition resulting in headlight and/or exterior lighting failure on 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles. The petition letter is attached for review. The petitioner alleges a defect in the lighting control module that powers the headlights which can result in the loss of vehicle headlights and/or all exterior lighting while driving. ODI has previously investigated this issue under PE08-066 which was closed without a defect finding.

Bosch fined $57.8 million by DOJ for price fixing and bid rigging

The US Department of Justice has been investigating bid rigging and price fixing among automotive parts suppliers for years, and so far the agency has leveled nearly $2.5 billion in fines against 34 companies. The latest business to be caught in this ongoing crackdown is Germany's Robert Bosch GmbH (Bosch), the world's largest independent auto component maker, and it agrees to pay a $57.8 million criminal fine to the Feds. According to the DOJ, Bosch has agreed to plead guilty to pricing fixing and bid rigging for spark plugs and oxygen sensors supplied to the former DaimlerChrysler, Ford and General Motors. The rigging is said to have occurred between January 2000 and July 2011. Bosch also allegedly played foul with starter motors sold to Volkswagen from January 2009 until at least June 2010. Bosch and other companies allegedly conspired on the pricing for bids to submit to automakers, and sold the parts at noncompetitive prices. The DOJ filed a one-count felony charge in US District Court for these actions. The company's plea is still subject to court approval, though. Bosch is only the third European company to be charged in this investigation, according to the DOJ. So far, many of the fined businesses have been from Japan, including Takata, NGK and others. Some execs have claimed price-fixing has been the standard operating procedure in the auto parts industry for a long time. Robert Bosch GmbH Agrees to Plead Guilty to Price Fixing and Bid Rigging on Automobile Parts Installed in U.S. Cars Robert Bosch GmbH, the world's largest independent parts supplier to the automotive industry, based in Gerlingen, Germany, has agreed to plead guilty and to pay a $57.8 million criminal fine for its role in a conspiracy to fix prices and rig bids for spark plugs, oxygen sensors and starter motors sold to automobile and internal combustion engine manufacturers in the United States and elsewhere, the Department of Justice announced today. According to the one-count felony charge filed today in the U.S. District Court of the Eastern District of Michigan, Bosch conspired to allocate the supply of, rig bids for, and to fix, stabilize and maintain the prices of, spark plugs and oxygen sensors sold to automobile and internal combustion engine manufacturers such as DaimlerChrysler AG, Ford Motor Company, General Motors Company and Andreas Stihl AG & Co., among others, in the United States and elsewhere.

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs

Ford announces recall of 220,000 units in three different actions

Ford has announced three separate recalls affecting 220,000 vehicles built between model years 2011 and 2015. By far the biggest affects just under 213,000 Ford Explorer and Police Interceptor Utility SUVs from MY2011 through 2013. In these vehicles, a spring in the doorway handle could be come unseated, Ford reports, causing the doors to open in a side-impact accident. The affected vehicles were built over a wide range of dates, starting with February 1, 2011 and November 30, 2012. As usual, the majority of the 212,911 vehicles were sold in the US market – 194,484 vehicles, in fact, while Canada and Mexico split the remainder, with 12,392 and 6,035, respectively. The other two recalls focus on specialty vehicles, with Ford recalling 6,500 F-Series Super Duty ambulances and emergency trucks from model years 2011 to 2015. In the case of the 2014 and 2015 F-Series, only trucks with the 6.7-liter turbodiesel are affected. These trucks may have faulty exhaust gas sensors, which according to Ford, could cause the trucks to think they're in a high-temperature situation. The trucks in questions were built at Ford's Kentucky truck plant between February 22, 2010 and February 1, 2015. Finally, the Blue Oval is recalling 1,725 specialty Lincoln MKT crossovers from MY2013 to 2015. These include limos and hearses built between March 6, 2012 and March 4, 2015. Affected MKTs may have a faulty vacuum pump relay that could cause a fire under the hood. In the case of the Explorers, dealers will inspect all four door handles and repair them as needed. The Super Duty's will get software updates, while the MKTs will have the vacuum pump relays replaced outright. A pair of MKT fires has been the only reported incident caused by the recalled components, while the company is unaware of any injuries or deaths. Scroll down for the official press release from Ford. Related Video: FORD ISSUES THREE SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., March 25, 2015 – Ford is issuing three safety recalls in North America. No accidents or injuries are attributed to these conditions. Details are as follows: Ford issues safety recall for certain 2011-2013 Ford Explorer and Ford Police Interceptor Utility vehicles for interior door handle issue Ford is issuing a safety recall for approximately 213,000 2011-2013 Ford Explorer and Ford Police Interceptor Utility vehicles in North America (actual 212,911) for an issue with the spring that controls the interior door handles.

Ford Focus RS makes US debut in New York, hits dealers Spring 2016

Attendees at the 2015 New York Auto Show will be among the first American consumers to see the all-new, third-generation Ford Focus RS. The Blue Oval announced the super-hot hatch will make its US debut in the Big Apple next week and will arrive in dealers roughly one year from now. We've covered the raging Ford, which is being sold in the US for the very first time, ad nauseam. It debuted in early February, made its auto show debut at the 2015 Geneva Motor Show and is finally crossing the Atlantic, complete with at least 315 horsepower from a 2.3-liter, turbocharged four-cylinder. A trick, torque-vectoring all-wheel-drive system, an industry-first Drift Mode, a proper six-speed manual transmission and looks that can kill round out what we're wagering is a wildly entertaining package. On top of announcing the Focus RS will hit dealers in the spring of 2016, Ford gave us our first look at a production color. While the Geneva Focus RS was finished in the same Liquid Blue as the Ford GT, Mustang GT350R and SVT Raptor that showed up in Detroit, the hue on the NYAS car, called Nitrous Blue, is one of four that will actually be sold on the Focus RS. While we're waiting to see it in person to render our final judgment, based on pictures alone, we're smitten. Alongside Nitrous Blue, Ford will offer the Focus RS in Stealth Gray, Shadow Black and Frozen White. In other news, your author will be starting the official campaign to bring back the gorgeous green from the last-gen RS immediately. Check back next week. Until then, scroll down for the official press release from Ford. All-New Ford Focus RS Makes U.S. Debut in New York • All-new Focus RS makes North American debut at New York International Auto Show introducing advanced performance technologies for ultimate hot hatch experience; pioneers innovative Ford Performance All-Wheel Drive with Dynamic Torque Vectoring, industry-first drift mode, additional drive modes • Third-generation high-performance hatch features specially engineered 2.3-liter EcoBoost® engine producing more than 315 horsepower, most powerful RS brake system ever with Brembo front calipers • Ford Focus RS will be at dealerships in the United States in spring 2016 DEARBORN, Mich., March 25, 2015 – The all-new Ford Focus RS is set to debut on U.S. soil at the 2015 New York International Auto Show.

Ford picks up new Ranger overseas [w/video+poll]

The new Ford F-150 is lighter and more efficient than the model it replaced, but if it's a smaller Ford pickup that you really wanted, you're going to have to pack your bags. Because while Dearborn stopped selling the Ranger in North America years ago, it still offers one in markets overseas. And it's just rolled out a refreshed model at the 2015 Bangkok Motor Show in Thailand. Following the reveal of the new Everest sport-ute with which it shares its chassis, the refreshed Ranger pickup benefits from revised sheetmetal, powertrain and equipment throughout. The changes are punctuated by a front end with a more rugged-looking grille, a more sculpted hood and projector headlamps. The interior has been updated as well, not only in terms of style but equipment as well, with an eight-inch touchscreen display in the dashboard running Sync 2 and dual TFT displays flanking the speedo in the instrument cluster. Under the hood, buyers will be able to choose between a carryover 2.5-liter inline four with 163 horsepower and 166 pound-feet of torque that's the sole gasoline option or one of two diesel options: a 2.2-liter four now producing 158 hp and 284 lb-ft, or a 3.2-liter inline-five with 197 hp and 347 lb-ft. The diesel engines are more efficient than before with available stop/start engine management, and offer what Ford says is class-leading towing capability. Six-speed automatic or manual gearboxes transmit the power to the road through either the rear wheels or all four. Production will continue in Thailand for the Asia Pacific Market, South Africa for Africa and Europe, and in Argentina for Latin America. All told the new Ranger will be offered in 180 markets, around the world but for better or worse, ours won't be one of them. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Bodie Stroud seriously updates the 1956 Ford F-100 into the BSI X-100

If you thought pickups could use a lot more love in the resto-mod world, then Bodie Stroud – he of "The Real Thing" Mustang – has something for you: the BSI X-100. His team starts with the body of a 1956 Ford F-100, but the sheetmetal is about all the nostalgia you're going to get; the body, tweaked with a chopped hood and a larger rear window on the cab, sits on a custom steel ladder-frame chassis. Out back is a one-piece, tubbed bed, and behind that are taillights from a 1948 (gasp!) Chevrolet. Under that hood is either a 412-horsepower, 5.0-liter Ford Racing Coyote crate engine, or a supercharged, 6.0-liter, 630-hp Ford Racing Aluminator motor, shifting through a Ford 4R70W four-speed automatic. Inside, the dash is reworked to fit gauges from a Ford F-150 King Ranch Edition, and the bench is swapped out for buckets from a Mustang GT. The independent front and four-link rear suspension are adjustable, helping to make room for staggered wheels - 19 inches in front, 20 inches in back, and larger can be accommodated. Six-piston Wilwood brakes handle the stopping. There's a lot of fabrication and hand-work involved, and it doesn't come cheap: BSI says the turnkey package starts at $180,000. If you've got it, this is an exceptional way to flaunt it. The press release below has all the details. THE BSI 1956 X-100: TIMELESS LINES, MODERN TECH New pickup from Bodie Stroud Industries melds the iconic style of the 1956 F-100 with a cutting-edge chassis and drivetrain to create a hand-built, all-new truck with the performance and reliability of a modern sports car. Sun Valley, Calif. (March, 2015) – In an era when anyone can walk into a dealership with good credit and a yearning to go fast and drive out in a 500+ horsepower sports car, owning and driving something truly unique has become a challenge. With that in mind, the craftsmen at Los Angeles-based Bodie Stroud Industries (BSI) have come up with something truly special – a brand new line of hand-built, turn-key pickups with the looks and sheet metal of an American icon, subtly massaged and fitted to a modern chassis and powered by the latest engine, transmission and electronics from Detroit. The result is the world's first all-new, turn-key 1956 Pickup: the BSI X-100. "When most people think about classic trucks, what comes to mind is usually the 1956 F-100, it's one of the most timeless designs of all time," says BSI founder Bodie Stroud.

Detroit 3 and UAW set for showdown over tiered wages

This week, thousands of United Auto Workers will converge on Cobo Center in Detroit for the Special Convention on Collective Bargaining, an every-four-year event that lets members tell UAW leaders what the negotiating priorities should be during contract negotiations. This is where a lot of sand and a lot of lines start coming together in preparation for contract negotiations between the UAW and the Detroit 3 automakers, which will happen later this year. Number one on the UAW agenda is the end of the two-tier wage system created in 2007 to help the automakers get through bankruptcy; veteran workers are paid the Tier 1 rate of around $29.00 per hour, new hires are paid the Tier 2 rate of between $15 and $20 and get about half the benefits of Tier 1. Tier 2 hiring has been an undoubted success for the automakers, allowing them to keep factories in the US and hire more workers. By agreement, it is capped at a certain percentage of each automaker's workforce, and while the union's ultimate position is to get rid of the dual-scale system entirely; one leader said Ford could easily afford the $335 million it would take to convert all its workers to Tier 1 out of its $6.9 billion in 2014 North American profit, and General Motors could do the same out of the $5 billion it is handing to investors through the (admittedly forced) share buyback. Other delegates say that at the very least they'd be happy with enforcement of the current caps in the new contract. The automakers, conversely, would welcome expansion of the Tier 2 ranks. Including benefits, import automakers pay workers "in the high $40 range" per hour, according to an analyst, while Ford and GM pay about $59 in wages and benefits per hour. More Tier 2 workers on the rolls would let those two companies get labor cost parity with the competition. Fiat-Chrysler pays wages closer to the imports because of special exceptions in its UAW contract that allow unlimited Tier 2 hiring; those exceptions will end on September 14 and bring FCA into line with the other domestics, unless the new contract maintains them. FCA CEO Sergio Marchionne is opposed to the two-tier system, having called it "almost offensive." One analyst says the UAW might win a sizable pay raise for Tier 2 and a small increase for Tier 1, but the keystone issue will be how the hiring matrix can help the automakers keep overall wages in line with the imports.

Inside the Ford GT's interior

Ford has crafted a simple yet high-tech interior for the GT supercar, which has been on display at auto shows around the world this year. The instrument panel has a two-tier design with a floating wing. There are soft-touch materials and carbon fiber, which also is used for the passenger cell. Still, the GT's interior has been shrouded in more mystery than the rest of the car. To cast some light on the GT's cabin, we caught up with Ford design vice president Moray Callum, who explained the ins and outs of the future icon's interior. Put simply, "there's not a lot of excess materials," Callum said. But what is there is pretty cool. In case you haven't heard, Ford plans to launch the GT in 2016. It will run a mid-mounted twin-turbo EcoBoost V6 paired with a seven-speed dual-clutch gearbox and make extensive use of carbon fiber for the body structure. Related Video:

2015 Saleen 302 Black Label Mustang unveiled with 730 horsepower

The last time Saleen made these pages it was to report that the firm was out of money. However, just before that announcement, the tuning specialist told us about the three Saleen 302 Mustangs it was developing at three levels - White Label, Yellow Label and Black Label, with those latter two trims to put out 640 horsepower and 565 pound-feet of torque. Well, the Black Label is here - don't let the California Sunset paint fool you - and it's more powerful than planned, with 730 hp and 600 lb-ft blasted out of a 5.0-liter Coyote V8 hooked up to a twin-screw supercharger. Saleen says it's the most powerful, refined, and advanced Mustang it has ever built. Keeping all that power on the road is the increase in downforce that comes from a body that's been extended one inch in front and two inches in the back, and the wing suspended over the decklid. The stock suspension is refitted with Saleen S4 springs, shocks, swaybars and bushings, and the 20-inch wheels on 275-section rubber hide 15-inch dimpled rotors. The interior gets the requisite frills in leather and contrasting stitches, as well as new gauges and badging. It'll take $73,214 to open the door, but just $2,015 to put down a deposit. For more info, check out the press release below. Related Video: 2015 Saleen 302 Black Label Mustang March 15, 2015 -- Earlier this year, Saleen Automotive released their 2015 White and Yellow Label 302 Mustangs to much fanfare. To round out their fleet, Saleen pulled out all the stops and developed one of the best Mustangs to date. This car is set to change the way pony cars are looked at from here on out. At a one-of-a-kind event in Downtown LA, Saleen raised the curtain on the latest pony car out of their Corona, CA headquarters. "Since I started building cars in 1984 my goal has always been to go above and beyond where anybody has been before", said Steve Saleen. "This will by far be the most refined and advanced Mustang we have built to date." With over 30 years of experience in both racing and manufacturing vehicles, it was only a matter of time before Saleen built a Mustang as comprehensive and technologically advanced as the 2015 302 Black Label. Power Saleen combined the reliability and potency of the 5.0L Coyote motor with a twin-screw supercharger. The pair produces the most power from a production Mustang yet at 730 horsepower and 600 lb-ft of torque on 91 octane gas.