2006 Ford Mustang Pony Pkg Coupe 2-door 4.0l on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Ford calling in 28k Edge crossovers over fuel line leak

A problem with the fuel line on certain examples of the Ford Edge has prompted the National Highway Traffic Safety Administration to issue a recall. The issue revolves around the metal housing on the fuel line pulse damper, which was apparently improperly manufactured in the first place and is prone to crack in certain circumstances, leading to a fuel leak. And as we all know, a fuel leak is not a good thing.
The problem affects model year 2012 and 2013 Edge crossovers equipped with the 2.0-liter engine and manufactured between September 2, 2010 and April 25, 2013 - a total of 27,933 units. Although the Lincoln MKX is closely related to the Edge, since it isn't offered with the same engine (to which the problem is related), the recall does not include the premium-badged version. See the recall notice below for further details.

Should reflective paint earn automakers EPA credits?

No matter where you look around the world, governments are cracking down on vehicle emissions and aiming for higher fuel economy standards. Generally, automakers are pushing back against the increased regulation, and in the US, General Motors, Ford, and FCA US are looking for new compromises. The Big Three want to the EPA to grant them retroactive emissions credits for using tech that they claim reduces CO2 but not on the government agency's on-road testing. Among these technologies are things like reflective paint and glass, LED lights, ventilated seats, stop/start, and more efficient air conditioning compressors. Starting with the 2014 model year, the automakers can receive credits for a few grams per mile reductions on models with some of these solutions, according to Automotive News. However, the companies are also petitioning the EPA to make the credits apply to earlier vehicles with them, as well. The emissions advantages for systems like stop/start and less polluting AC refrigerants seem fairly obvious. For reflective paint and glass, the belief is that keeping a vehicle interior cooler should mean a lower need for air conditioning and therefore a decrease in CO2. Margo Oge, the former boss of the EPA's Office of Transportation Air Quality, told Automotive News these credits are part of the plan. "That's the whole point of what we tried to establish," she said. "We wanted companies to invest in and develop these technologies." The EPA wants vehicle emissions at the corporate average equivalent of 54.4 miles per gallon fuel economy by 2025, and so far that seems achievable. It will translate to less than 40 mpg on the EPA sticker. In a report last summer, the industry was about 10 grams per mile of CO2 better than the rules required, and that was solely based on 2012 model year vehicles. In an update for 2013, the companies were up to 12 grams per mile beyond targets. News Source: Automotive News - sub. req.Image Credit: Mark Humphrey / AP Photo Government/Legal Green Ford GM Emissions Fuel Efficiency FCA fca us