1997 P1sc Pro-charged Cobra, 500hp!!!!!!! on 2040-cars

Auto blog

2014 Ford Fusion to get 1.5L EcoBoost three-cylinder?

Just one year after launching the all-new 2013 Fusion, Ford is reportedly set to alter the sedan's powertrain lineup with the addition of a new 1.5-liter turbocharged three-cylinder EcoBoost engine. A member of Blue Oval Forums apparently got their hands on the ordering guide for the 2014 model year Fusion, and this 1.5-liter mill is set to be introduced with late availability.
This lines up with other news about the Chinese-market Mondeo being offered with a new 1.5-liter EcoBoost - a derivative of the 1.0-liter triple that will come to North America under the hood of the Fiesta (note: the 1.0 is also offered in the current Euro-spec Mondeo). In the Chinese application, the larger three-pot engine produces 177 horsepower and 177 pound-feet of torque, which is very close to the current 1.6-liter inline-four's output numbers of 178 hp and 184 lb-ft.
What's interesting, however, is that the 1.6-liter engine will reportedly still be offered in the Fusion, but only with the six-speed manual transmission. The smaller 1.5-liter EcoBoost will only be mated to a six-speed SelectShift automatic, and will feature start/stop. This means that while the 1.5 is slightly down on power compared to the 1.6, it could easily improve fuel economy numbers, allowing the Fusion to regain the title of having the best mileage in the segment, likely besting the 38 miles per gallon of the Nissan Altima. Currently, the Fusion 1.6 is rated at 23 mpg city and 36 mpg highway.

Ford, Alcoa announce next generation of aluminum lightweighting for F-150

Ford likes what it has seen with the use of aluminum in its world-beating F-150 pickup trucks. Now, the Blue Oval is working with Alcoa to use that company's Micromill material to increase the amount of aluminum in Ford vehicles. In fact, Ford will start using Micromill on 2016 model-year F-150s later this year, and will double the material's use in 2017. The purpose, as you might suspect, is light weighting, which allows Ford to boost towing capacity while adding as little weight as possible. Ford will be the first automaker to use Micromill, and will use it in both structural components and exterior panels. Micromill's rolling-mill system cuts the time it takes to turn molten metal into coil to 20 minutes from about 20 days. Already, Ford has had positive results by using aluminum on its leading pickup truck model. In April, it was announced that the 2015 Ford F-150 achieved a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing. Safety features like inflatable seat belts, adaptive steering columns and a forward collision warning system helped matters. General Motors may have taken note of those results, even after running an ad campaign touting its continued use of steel over aluminum. Last month, GM said it would sink $877 million into its Flint, MI, truck factory. Reuters said much of the expense was to convert many of the bodies for models like the Chevrolet Silverado and GMC Sierra pickups into aluminum. You can take a look at Ford's press release below. Ford Motor Company and Alcoa Inc. are collaborating to produce next-generation automotive aluminum alloys that are more formable and design-friendly. Ford will use Alcoa's Micromill® material in multiple components on the 2016 F-150 – becoming the first automaker to use the advanced automotive aluminum commercially. The companies entered into a joint development agreement to collaborate on next-generation aluminum alloys for automotive parts using Micromill™ technology. ''Light-weighting enables us to design vehicles with great customer attributes – like the F-150, which can tow more, haul more, accelerate quicker and stop faster than the previous F-150, and is more fuel-efficient than ever," said Raj Nair, Ford group vice president and chief technical officer, Global Product Development.

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video: