1967 Ford Mustang on 2040-cars

Auto blog

2016 Ford Fusion hybrid, plug-in getting $900 price cut

While the overall the green car market in the US suffered a slump in 2014 with a 6.5-percent drop in sales, the demand for electric vehicles and plug-ins actually jumped a healthy 28 percent. The Ford Fusion Energi plug-in was among the winners in the segment with a nearly 90 percent boost to 11,550 examples sold for the year. To keep the ball rolling in the face of low gas prices and updated challengers entering the field, the Blue Oval is slashing $900 off the cost of both the Energi and standard Fusion Hybrid to make them even more attractive to buyers. Ford's Monique Brentley told Autoblog that, the reduction was done, "basically, just to attract more customers and promote sales." The cut affects every trim of both electrically assisted versions of the Fusion for the 2016 model year, according to Cars Direct, and it comes without the removal of standard equipment. On the contrary, the Energi reportedly gets a new EcoSelect driving mode that activates additional regenerative braking and more gentle acceleration. The $900 pricing adjustment is only for these models and not available on the versions with only an internal combustion engine, which makes it clear Ford wants to tantalize green car buyers towards this pair. According to Cars Direct, the models should go on sale in late 2015. The least expensive 2016 Fusion Hybrid S will retail for $25,675, plus $825 destination on all of them, and a 2016 Energi start at $33,900. Autoblog's own pricing pages for them show the same numbers (here and here). Cars Direct also predicts for the Blue Oval to keep most incentives in place even after the adjustment. Assuming these figures don't change before the sedans actually go on sale, the price cut makes a 2016 Energi less expensive than a 2015 Chevrolet Volt starting at $34,345 (plus $825 destination). The cost of the updated 2016 model for the Chevy isn't announced yet.

Ford starting up 2.0L EcoBoost engine production in Ohio

Joe Hinrichs, Ford's President of The Americas (pictured above), announced today that in late 2014, the automaker will be building the 2.0-liter EcoBoost four-cylinder at its Cleveland Engine Plant, a move requiring a $200-million investment and the hiring of 450 new employees. European-built Ford products will continue to source this engine from the Valencia, Spain plant where all of these EcoBoost four-cylinder engines are currently built, and the new Cleveland engines will be used for all North American-made models.
Ford is planning to build its popular EcoBoost engines regionally to maximize production capacity and meet customer demand. Last year, Ford sold 334,364 vehicles with EcoBoost engines in the US alone, and that number is expected to swell to more than 500,000 by the end of this year, with global sales expected to total 1.6 million. By 2015, Ford says that 95 percent of its nameplates will offer an EcoBoost engine.
One such vehicle that could be adding an EcoBoost engine, according to Automotive News, is none other than the 2015 Ford Mustang. The report says that Ford could use either the 2.0-liter EcoBoost or an upcoming 2.3-liter EcoBoost in the sixth-generation pony car.

Fiat Panda by M-Sport a one-of-a-kind rally car

English racing and engineering firm M-Sport is probably best known for the Bentley Continental GT3 endurance racer and the Ford Fiesta R5 customer rally car. Since building the first of 294 Fiesta R5 Mk. I cars in 2013, the fleet of pint-sized competitors has won a total of more than 950 races. So when a longstanding M-Sport customer asked the company to do something special with a clapped-out, 1990s-era Fiat Panda that would retain the car's Panda-ness but also make it a stonking rally car, M-Sport decided to combine the Italian with the Anglo-American. The result is the Panda by M-Sport, a widened Panda bodyshell lowered atop a Fiesta R5 chassis and engine. Otherwise known as Panda'monium. Or Pandiesta, if you're tipsy. Just fitting the skinny Fiat over the tube-frame chassis meant widening the Panda's body shell by 14.2 inches; that slick grille is actually made of two Panda grilles to gain the required width. That surgery helps maintain the original Panda's silhouette, but more was needed to slide the Fiesta's wider track underneath. More latitudinal stretch was provided by the box-section wheel arches that, up front, flow into a front bumper that is half snowplow. In the longitudinal direction, the Pandiesta's wheelbase is 12.6 inches longer than that of the stock Panda. The Ford's 1.6-liter EcoBoost four-cylinder lives under the hood. It sends nearly 300 horsepower and 332 pound-feet of torque to four Pirelli P Zeros through a five-speed sequential transmission and two custom differentials. The new rear diffuser and single, central exhaust convey the seriousness of the endeavor. Hand-embossed lettering spells "PANDA 4x4" on the rear hatch in case anyone has questions about this having as much capability as the standard Panda 4x4. The interior is all Fiesta R5 save for the Panda-mimicking instrument panel and the co-driver's footrest. The latter is also inscribed with the word "PANDA." Despite the license plate, there's no question of street legality here, or rather illegality. M-Sport says the Panda'monium is ready to do any special stage on tarmac or gravel. Seems this is also the car that launches a new division for customer creations called MS-SV, which is M-Sport Special Vehicles. You can watch M-Sport owner Malcom Wilson take you on tour of the Panda by M-Sport in the video at top, and check out what the finished product can do on a track here.  Related Video: This content is hosted by a third party.