2012 Ford Fusion Sel 2.5l*no Reserve*blidspot*spoiler*camera*sync*htd*rebuilt on 2040-cars

Auto blog

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

Ford preparing camera-based Front Lighting System

Ford's European Research and Innovation Center in Aachen, Germany is in pre-development on two new lighting technologies that Ford expects to be available "in the near-term." The Camera-Based Advanced Front Lighting System uses GPS and a video camera in the rear-view mirror housing to move the adaptive headlights with the road terrain. When the car detects a roundabout or an intersection, for instance, the light beam widens to offer a bigger view of what's coming from the side. If GPS detected the intersection, the location is tagged so that the beam automatically widens when it is encountered again. The Spot Lighting system uses an infrared camera behind the grille, and is similar to but less complex than systems employed by Mercedes-Benz and Audi. When the infrared camera detects a potential hazard like a person or an animal in or near the road up to 390 feet ahead, it can shine one of two LED spotlights on the danger. A display in the dash cluster will highlight the object with a yellow or a red box, depending on the how close it is and how dangerous it might be. Even though there are only two spotlights, mounted next to the fog lights on the lower front bumper, the system can detect up to eight objects at a time. Don't expect to see these features come to the US, though. Our regulations remain opposed to such headlight trickery, so until that changes, Ford says it's focusing these developments on the European and Asian markets. The video above shows how it works, the press release below has more details. FORD DEVELOPING ADVANCED HEADLIGHTS THAT POINT OUT PEOPLE, ANIMALS IN THE DARK, AND WIDEN BEAMS AT TRICKY JUNCTIONS - Ford is developing advanced lighting technology that enables drivers to more easily see potential hazards when driving at night - Camera-Based Advanced Front Lighting System widens beam at junctions and roundabouts after interpreting traffic signs - GPS-enabled system uses forward-facing camera to remember roadways and direct lighting to help drivers better see bends in the road – effectively lighting the way home on previously travelled routes - Spot Lighting uses infra-red camera to detect pedestrians, cyclists, and animals, and highlight the potential hazards; system can detect up to eight potential hazards and highlight two highest priorities using specially designed headlights and on-screen display AACHEN, Germany, July 17, 2015 – Driving at night, particularly on unlit roads, can be a nerve-wracking experience.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.