1988 Ford Super Duty Mason Dump 7.3 Diesel on 2040-cars

Auto blog

Ford Green Zone works magic with GPS to make your drive smarter, cleaner

For the most part, plug-in hybrids rely on the power stored in the battery until that charge is depleted. Unless the switch can be changed manually, it's only then that the cars fire up the internal combustion engine and begin using the fossil fuels on board. This is ideal, of course, when one's drive isn't long enough that the car needs to start sipping gasoline at all. On longer commutes, when it's certain that the route is longer than the car's all-electric range, this isn't necessarily the most efficient use of energy. Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds. Ford is working on a smart system, based on Nokia mapping technology, that uses GPS data to use both the electricity and conventional fuel more efficiently. Since battery power is less efficient at highway speeds, Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds, rather than just using up all the electrons right at the beginning of the drive. Using a website or the in-car navigation system, the driver can pinpoint the parts of the route, highlighted in green, where using battery power would be more effective, and set the car to automatically switch to electricity for those sections. Depending on the route, the car could automatically switch back and forth between the two power sources multiple times, particularly if the drive is a mix between city and highway driving. Of course, Green Zone will be go beyond that. The program is being developed to take traffic and road grade into account, details that allow the car to be make even smarter choices to improve efficiency. Ford even hopes to have Green Zone learn driver habits, and respond accordingly depending on who is driving the car. The system could control other features as well, such as anticipating corners and shifting the headlights to better illuminate the road ahead. Green Zone could also potentially use information from vehicle-to-vehicle networking to control functions in the car. The Green Zone system still has a few years before it will be ready to be put into production vehicles, but Ford is confident it will make its way onto the road eventually. As with other innovations that improve efficiency and make our vehicles smarter, we can expect to see similar technology from other manufacturers, until it becomes a regular part of driving in the future.

Ford recalls 1.3 million Fusions, MKZs: Steering wheels could come off

When driving a car, the steering wheel is only expected to move in a rotational fashion, either clockwise or counter-clockwise. When it moves in some other direction, something is wrong, and when it moves the wrong way enough that it is no longer attached to the steering column, that's a really, really bad thing. And apparently, according to a recall issued by Ford, there are over 1.3 million Ford Fusions and Lincoln MKZs that are at risk of this happening. And at least two accidents and one injury have been attributed to the issue. Ford says the problem is that the steering wheel bolt that keeps the wheel attached to the column might not provide enough torque, resulting in the bolt slowly loosening and working its way off the column. The good news is that the fix is really simple. Ford will install a larger bolt with more threads along with a larger nylon patch to keep it all locked down. The fix is completely free to owners. Cars affected by the recall include 2014 to 2017 Fusions built built at the Flat Rock plant in Michigan between August 6, 2013, and February 29, 2016. Model year 2014-2018 Fusions and MKZs built at the Hermosillo factory in Mexico are also affected. So if you have one of those sedans, please get in touch with your local dealer to have the issue addressed. Related Video:

UAW warns automakers: Restarting U.S. plants is 'too soon and too risky'

WASHINGTON/WARREN, Mich. — The head of the United Auto Workers union on Thursday said it was "too soon and too risky" to reopen auto plants and Michigan's economy in early May, citing insufficient scientific data and coronavirus testing to assure workplaces are safe. The warning from UAW President Rory Gamble on Thursday afternoon came as General Motors Co , Ford Motor Co and Toyota Motor Corp took new steps toward reopening North American vehicle manufacturing operations in an environment where consumer demand is uncertain and worker safety paramount. The union has said that 24 of its members have died from Covid-19, though it was unclear whether they might have become infected in the workplace. Unionized Detroit automakers and non-union German and Asian automakers have been preparing to restart U.S. vehicle making operations by early May. Companies have shifted reopening dates amid uncertainty about government stay-at-home orders. Gamble's statement appeared to derail plans by the Detroit Three to start bringing UAW workers back to vehicle manufacturing jobs on May 4. The longer the automakers cannot produce profitable U.S.-made trucks and sport utility vehicles, the longer they burn cash. The UAW leader's statement was also aimed at Michigan Gov. Gretchen Whitmer, who has come under pressure from conservative groups and President Donald Trump to ease coronavirus stay-at-home restrictions. "At this point in time, the UAW does not believe the scientific data is conclusive that it is safe to have our members back in the workplace. We have not done enough testing to really understand the threat our members face," Gamble said. "We strongly suggest to our companies in all sectors that an early May date is too soon and too risky to our members, their families and their communities." Gamble said the union was "happy with the auto companiesÂ’ response and cooperation on working through the health and safety protocols we will need in the workplace when it is appropriate to restart." Earlier Thursday, GM began notifying front line managers to come back to work next week to get trained on new safety protocols designed to prevent the spread of the novel coronavirus as workers return to plants.