Ford F250 Reg Cab Xl Work Truck Reading Utility Body Fleet One Owner Low Miles on 2040-cars

Auto blog

Junkyard Gem: 1971 Mercury Comet 2-Door Sedan

When Ford introduced the original Maverick for the 1970 model year, Dearborn tradition required that a Mercury-badged version be created. That car ended up being the Comet, built from the 1971 through 1977 model years. Here's one of those first-year Comets in rough but recognizable condition, found in a Denver self-service yard not long ago. The Comet name had spent the 1960s affixed to the flanks of Mercurized Ford Falcons (1960-1965) and Fairlanes (1966-1969). Since the Maverick was the successor of the Falcon — sales of which went into an irrecoverable downward spiral once its sportier Mustang first cousin hit the streets — it made sense to move the Comet name over to the Mercury version. Nearly every American Mercury model ever sold was a U.S.-market Ford model with a different name and some gingerbread slapped on. Notable exceptions to this tradition include the 1999-2002 Mercury Cougar (mechanically based on the Contour but with a unique body) and the 1991-1994 Mercury Capri (an Australian-built mashup of Mazda components borrowed from the Ford Laser). The Comet was by far the cheapest Mercury model available in 1971, though it was considered more prestigious than its Maverick counterpart. The price tag on the '71 Comet two-door sedan started at $2,217 (about $16,505 in 2022 dollars), while the '71 Maverick two-door sedan cost $2,175 ($16,193 today). Meanwhile, AMC would sell you a new Hornet two-door sedan for one dollar less than a Maverick, Chevrolet had the Nova coupe for a dollar more than the Maverick, and Plymouth offered the Valiant Duster for $2,313 ($17,220 now). Toyota had a Maverick competitor as well that year, with the Corona at $2,150 for the sedan and $2,310 for the coupe. Having driven every one of the aforementioned models, I'd take the Duster if I went back in time and had to choose one (as a 1969 Corona owner, I'm not a fan of the 1971 facelift, though the Corona's build quality beats the Duster's). The build sticker on this car tells us that it was built at the Kansas City Assembly Plant (where Transits and F-150s are made today) and sold through the Los Angeles district sales office (there was a DSO in Denver, so it's a near-certainty that this car didn't start out in Colorado). The paint started out as Bright Blue Metallic (it's neither bright nor metallic 51 years down the road) and the interior was done up in Medium Blue Cloth & Vinyl.

2014 Ford Fusion to get 1.5L EcoBoost three-cylinder?

Just one year after launching the all-new 2013 Fusion, Ford is reportedly set to alter the sedan's powertrain lineup with the addition of a new 1.5-liter turbocharged three-cylinder EcoBoost engine. A member of Blue Oval Forums apparently got their hands on the ordering guide for the 2014 model year Fusion, and this 1.5-liter mill is set to be introduced with late availability.
This lines up with other news about the Chinese-market Mondeo being offered with a new 1.5-liter EcoBoost - a derivative of the 1.0-liter triple that will come to North America under the hood of the Fiesta (note: the 1.0 is also offered in the current Euro-spec Mondeo). In the Chinese application, the larger three-pot engine produces 177 horsepower and 177 pound-feet of torque, which is very close to the current 1.6-liter inline-four's output numbers of 178 hp and 184 lb-ft.
What's interesting, however, is that the 1.6-liter engine will reportedly still be offered in the Fusion, but only with the six-speed manual transmission. The smaller 1.5-liter EcoBoost will only be mated to a six-speed SelectShift automatic, and will feature start/stop. This means that while the 1.5 is slightly down on power compared to the 1.6, it could easily improve fuel economy numbers, allowing the Fusion to regain the title of having the best mileage in the segment, likely besting the 38 miles per gallon of the Nissan Altima. Currently, the Fusion 1.6 is rated at 23 mpg city and 36 mpg highway.

2017 Ford F-150 Raptor desert testing heats up

In case there was any doubt, Ford is taking the development of the second-generation SVT Raptor very, very seriously. The Blue Oval recently completed over 1,000 miles of testing in the boiling heat of the American southwest. Apparently, that mileage was accrued over a 66-mile route designed to mimic the torturous terrain encountered by racers in the Baja 1,000 off-road race. The prototypes, which were built from a mix of existing and next-gen Raptor components, were tested with "fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches." Ford claims the new truck managed to run the circuit 25-percent faster than the current F-150 SVT Raptor, averaging 50 miles per hour while going as fast as 100 mph in stretches. That said, Dearborn didn't release any dedicated times, so it's unclear just how quickly the 66-mile stage was completed. We do know that durability was a big part of the testing. Ford claims each lap was completed by what sounds like a pretty significant jump, with the trucks ascending a steep ramp onto a two-foot plateau and then completing a step-down to level ground. We have to take Ford at its word here, though. "Steep" can mean any number of things, and we've no idea just how fast the trucks were hitting the ramp or how much air they got. Hopefully, the jumps were aggressive enough to prevent future frame issues. Still, Ford boasting about how rough the Raptor's testing is can be taken as a positive sign for fans of the next-generation of SVT's rugged pickup. NEW F-150 RAPTOR WRAPS UP INITIAL DESERT DURABILITY TESTING DEARBORN, Mich., July 7, 2015 – The 2017 F-150 Raptor – Ford's toughest, smartest, most capable off-road truck ever – recently completed more than 1,000 miles of testing in the southwestern United States. Over 1,028 miles of desert trail designed to parallel the Baja race course in Mexico, the 66-mile route featured a wide range of surfaces including fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches. The truck topped speeds of 100 mph in places, slowing to 10 mph in others, for an average speed of approximately 50 mph. The 2017 Raptor is 25 percent faster than the current truck based on lap times. At the end of each lap, the new Raptor completed a tabletop jump consisting of a steep ramp up to a two-foot plateau, then a step-off back to level ground.