2000 Ford F-250 Crew Cab Xlt 7.3 Turbo Diesel 4x4 Only 156k Monster Truck 54" on 2040-cars

Auto blog

How Ford made its 2015 Ford Mustang safer for toupee wearers [w/video]

Ford is ready to tell the story of its 2015 Mustang Convertible, the can't-miss bits being the easier, quicker and quieter roof operation, a more robust roof build for a coupe-like cabin noise, more trunk space, better visibility and reduced in-cabin buffeting. The top release system has been completely redesigned with a single, center-mounted latch on the windshield frame instead of the dual latches of before. The driver can now release the roof without having to lean over into the passenger space, after which the top goes down fully automatically with the press of a button. Ford doesn't say how long it takes to stow, but it's apparently done in half as much time as before, so figure around 8 seconds.
The roof uses a five-bow structure, with the fabric outer and full inner headliner sandwiching ten millimeters of insulation. Detailing work on the top has eliminated "unsightly folds" in the corners when the roof is up and made it more compact when down; its Z-fold assembly is 6.7 inches lower than before at its highest point when put down. Ford says the new electric drive internals make less noise when in operation, and the fully-finished droptop look is achieved with snap-in caps that flank the rear seating and stow in the trunk when not in use (the outgoing Mustang's top was higher and the front when folded and always looked like it was catching air and creating drag).
The compact roof and newly independent rear suspension setup in back means liberated trunk space, 11.4 cubic feet ready to swallow golf bags and tourist swag. You can read a lot more about it in the press release below, check it out in the short video of running footage and learn about the aerodynamic improvements made to the entire Mustang lineup that decrease drag and increase fuel economy.

Ford invests $682 million in Edge-producing Canadian facility

Ford announced that it's investing $682 million in its Oakville assembly plant in Ontario, Canada, to make it a global manufacturing plant, which the automaker also says secures 2,800 jobs there. Including this injection of cash, Ford has invested over $2 billion in Canada in the last decade, starting with nearly $1 billion for Oakville in 2004, and over $570 million for its Essex Engine Plant in 2010.
The move to make Oakville a global manufacturer of Ford vehicles means, "If consumers suddenly shift their buying habits, we can seamlessly change our production mix without having to idle a plant," says Joe Hinrichs, Ford's president of the Americas.
Ford says that the latest investment will help it meet North American demand for the Oakville-produced Edge crossover, which is on track this year to beat 2007's US sales record of 130,000 Edges. The Ford Flex and Lincoln MKX and MKT are also manufactured at the plant.

Lincoln Continental to end after one-and-done generation?

After only 18 months on sale, the vultures of rumor have begun circling above the Lincoln Continental. Ford Authority says "sources intricately familiar with Ford Motor Company's future product plans" for the domestic luxury brand say the Continental won't get another chance at life after this generation. Those sources didn't detail Ford's reasons for dispatching the executioner on another sad task, but if this is true, even the reasons we can only guess make enough sense to justify the move. The Continental launched into a crossover mania still mushrooming in strength like some Marvel villain, the equivalent of a new dinosaur hatching a few months before the Chicxulub Impact Event. In 18 months, the Continental sold 18,846 units, 12,012 of those sales happening in 2017. In the U.S. this year, sales amounted to 1,573 units through February, about 25 percent down on the annualized monthly rate. It could be worse: The Lexus GS has found 1,009 U.S. buyers so far this year, the Acura RLX, 285. Conversely, the Cadillac XTS — yes, a fleet darling — secured 3,163 sales in the same period. And the German kingpins live in another dimension, with BMW scooting 5,641 5 Series models off dealer lots, and the Mercedes E-Class boasting 8,411 sales of all three variants. Even the much more expensive and much more profitable Lincoln Navigator rang up 2,351 sales in the first 60 days of 2018. That's disheartening reading, especially after Ford reportedly spent more than $1 billion to bring the Continental to market. Sedan segment woes look to have killed the Continental's platform siblings, too, making the Lincoln's demise simply part of the cull. The CD4 architecture also underpins the Ford Fusion and Lincoln MKZ. Ford canceled the Fusion redesign and won't commit to making either vehicle after 2020. Lincoln's passenger car sales declined more than 30 percent last month; meanwhile, Lincoln needs to spend its money on the crossovers that are selling, and investment in the coming three-row Aviator that will replace the MKT. Ford has a CD6 platform in development that suits front-, rear-, and all-wheel-drive vehicles. Under previous CEO Mark Fields, a new Fusion, Mustang, and MKZ would ride on the CD6, as well as the new Explorer and a Lincoln brother. Those plans left with the previous administration, and company sources told both Ford Authority and The Truth About Cars not to expect a Continental revival on that architecture. Related Video: