2014 Ford F150 Xlt on 2040-cars

Auto blog

Ford Focus RS ready to make our hot hatch dreams real

Ford's current hot hatch siblings the Fiesta ST and Focus ST are already two pretty great entries into the segment, but there's always a desire for a little more. Thankfully, it looks like the Blue Oval is ready to satiate that need because it's continuing to test the even more powerful Focus RS around Europe. According to our spy shooters, these shots come from near the Nürburgring.
As with previous photos, Ford engineers continue to heavily camouflage the front end of the RS prototypes, but there's a big difference here. Unlike earlier ones, this example appears to have a closer-to-production-ready front bumper rather than just a horizontal strip for the license plate. That may point to development getting somewhat closer to wrapping up. Although, this one lacks the larger rear wing from prior testers, and the exhaust also appears to be a work in progress with the rear diffuser covered in mesh in these latest shots.
The RS is rumored to be using the 2.3-liter turbocharged four-cylinder from the 2015 Mustang, but power is reportedly turned up from 310 horsepower in the 'Stang to somewhere between 325 hp and 350 hp for the Focus. Routing all that just through the front wheels could be a recipe for serious torque steer, and all-wheel drive is potentially being used for better traction.

Would you pay $17 a month to give your older Ford connectivity?

When it was first introduced in 2007, there was nothing like the original Ford Sync system, since it allowed car owners to connect and use a portable device better than anything that came before it. And because it was a brought-in/tethered and software-based system, Sync leveraged a device's connectivity and was easily updated. It took competitors awhile to catch up: Toyota Entune wasn't available until 2011, and Chevy MyLink didn't roll out until 2012. But now Ford is the one playing catchup since it stuck with the brought-in strategy while most other automakers were quicker to add connectivity via an embedded cellular modem. Ford initially installed 2G/3G modems in its small fleet of electric and plug-in electric vehicles starting in 2012 so that owners could keep tabs on charging. Embedded connectivity came to Lincoln in 2014, and Ford began adding onboard 4G LTE via Sync Connect to select cars starting with the Escape in 2015. To get more cars connected more quickly, last week the automaker rolled out its FordPass SmartLink solution that plugs into the OBD port of 2010 to 2017 model year vehicles. This lets owners retroactively get onboard Wi-Fi, set up a "geo-fence" to keep tabs on a car's location, receive vehicle health reports and allows remote engine starting and door locking/unlocking using a smartphone app, among other features. But to connect older Ford vehicles will cost owners $16.99 a month for two years, not including installation. Ford throws in 1 GB of data or a 30-day trial, whichever comes first, after which owners have to add the vehicle to their Verizon shared data plan, which supplies connectivity for SmartLink, or establish a new account. (Disclosure: Autoblog is owned by Verizon.) By comparison, GM's 4G LTE data plans start at $10 a month for 200 MB and goes up to $30 for 3 GB, and owners can also add a car to an AT&T shared-data plan. But OnStar doesn't have a separate monthly subscription for the embedded modem or an installation charge, and standard features via the RemoteLink Mobile App are free for the first five years of ownership. FCA's Uconnect Access service also uses an embedded modem to provide similar telematics features for $20 per month following a free one-year trial, while a la carte in-car Wi-Fi is offered for $10 per day, $20 per week or $35 per month.

Project Ugly Horse: Part VI

Solid axle? What solid axle?
I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation.
This should not have gone this easily. Having a long and checkered history of simple projects punctuated by much wailing and gnashing of knuckles, I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation when I finally decided to lay hands on the '89 Mustang with the goal of relieving the car of its stock rear axle. Instead, it took less than a full morning's worth of work to carve the old 7.5-inch solid axle from its moorings and mock up something, well, different.