1969 Ford F-100 on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Inside Ford's high-tech climate chamber

There are two ways an automaker can test its vehicles in extreme climates: it can send said vehicle around the world – from Death Valley to the Arctic Circle – in search of the harshest weather, or it can recreate those conditions in an enclosed environment. We're sure that many automakers undertake some combination of both, but in this latest video clip, Ford shows us around inside it's state-of-the-art climate chamber. At its Driveability Test Facility in Allen Park, MI – inaugurated in 2010 just across the street from the Roush Technology Center – Ford can simulate all sorts of extreme conditions. It can drop the temperature down to -40 degrees Fahrenheit or raise it up to 130, and take it up to a simulated 12,000 feet above sea level or drop it down to 280 feet below. blast it with 150-mile-per-hour winds. It can control the level of humidity, approximate the intensity of the sun and even blast the test vehicle with artificial snow, just like your favorite ski resort. The facility strikes us as an engineering feat as impressive as some of the vehicles it's used to test, but don't take our word for it – scope it out for yourself in this brief two-minute video clip, which even includes some helpful tips for winter driving this holiday season and beyond. News Source: Ford via YouTube Plants/Manufacturing Ford Videos Michigan winter

2016 Ford Focus RS mule spotted on US soil

Okay Ford, this is what we like to see. One of our intrepid spy photographers has captured a vehicle that we weren't even sure would see the light of day - the next Focus RS. While this is pretty clearly a mule based on the current Focus ST, as our spy points out, there are a number of giveaways about this hot hatch's true nature.
Indication number one that all is not right with this Focus is the heavily camo'd front fascia, which has been completely reconfigured for duty on the RS. It boasts significantly larger grilles that are meant to accommodate what is likely the 2.3-liter, turbocharged four-cylinder that's destined for the 2015 Ford Mustang. Considering that, then, we can expect around 300 horsepower and 300 pound-feet of torque from the hottest of Foci, although it's entirely possible that the production model could climb even higher, to around 330 hp.
The front fascia tweaks are complemented in the back by a modified rear bumper, which fails at hiding a pair of exhaust tips quite unlike the standard Focus ST's center-exit exhaust. Other obvious changes include the wheel/tire/brake package on this particular car. Larger 19-inch wheels are shod in super-sticky Michelin Pilot Super Sport tires in 235/35/19 while the brakes feature what we think are four-piston calipers, possibly from Brembo, up front.