2007 Eddie Bauer V8 Used 4.6l V8 24v Automatic Rwd Suv on 2040-cars

Auto blog

MMD by Foose 2015 Mustang GT gets 810 hp and one lucky winner

Modern Muscle Design worked with the one and only Chip Foose to create this, the MMD by Foose 810-horsepower 2015 Ford Mustang GT. Several things will come of the collaboration, the best one for you being that you have a chance to win the coupe this Summer at the AmericanMuscle Mustang show in Pennsylvania. As of right now you can enter at the AmericanMuscle site, and if your name is pulled from the hat then MMD will fly you to the show in August and Foose will personally hand the car over to you. For everyone else, there is still plenty to pay attention to. The 5.0-liter Coyote V8 gets 375 more horsepower courtesy of a modified 2.9-liter, twin-screw Whipple supercharger from Bama Performance. By the time those horses stampede down a carbon fiber driveshaft, MMD says there are 650 of them left to turn the 20-inch Foose wheels. If you want to take your own Mustang in this direction, there will be a selection of parts created for this car coming later this summer under the MMD by Foose banner, including the hood and side scoops, rocker panels, and chin spoiler. The show car also gets a Vogtland Sport Suspension and a Magnaflow Competition cat-back exhaust. Check out the press release below for more information. MODERN MUSCLE DESIGN AND CHIP FOOSE DEBUT 800+ HORSEPOWER MUSTANG IN SOUTHERN CALIFORNIA MMD by Foose 2015 Mustang to be Personally Given Away by Chip Foose at AmericanMuscle's 2015 Mustang Show this Summer MALVERN, Pa. (May 20, 2015) – Modern Muscle Design (MMD), the leader in aftermarket Mustang styling, along with the renowned vehicle designer, Chip Foose, today unveiled a one-off 810-horsepower supercharged MMD by Foose 2015 Mustang GT at Foose Design Inc. headquarters in Huntington Beach, California. Today's reveal comes ahead of the annual AmericanMuscle Mustang Show in Pennsylvania where the custom-built Mustang will be given away. The 2015 AmericanMuscle Mustang Show is the 7th annual charity all-Mustang car show in which 10,000+ spectators and nearly 3,000 Mustangs gather to benefit this year's charity, Make-A-Wish®. At the heart of MMD by Foose is a 5.0 liter V8 engine producing more than 810 horsepower at the crank courtesy of a specially tuned version of Bama Performance's 2.9-liter twin scroll Whipple supercharger. After being routed through the transmission, a custom carbon fiber driveshaft and upgraded axles from The Driveshaft Shop, 650 horsepower reaches the custom 20" Foose Design wheels wrapped in Pirelli tires.

Ford Mustang GT350 seen and heard in motion for the first time

We just recently saw our first spy shots of the next-gen hi-po Ford Mustang slated to replace the Shelby GT500, but now we're getting our first look - and listen - of prototypes captured on video. Mustang6g.com has the video (along with some different spy shots), which show that, if nothing else, SVT knows how to tune an exhaust system. The :50 mark is a good example of this, but fast-forward to around 2:00 where the driver revs the engine and really gets on the throttle hard taking off from a stop.
There's still no definitive evidence that the next-gen SVT Mustang - said to be called GT350 - will be naturally aspirated, but it sounds just as menacing as the current Shelby GT500. While the video posted below exhibits the sort of quality that is to be expected from someone driving while trying to film someone who is attempting to elude being filmed, it's still exciting to see and hear this new Mustang in motion.

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video: