2014 Ford Explorer Xlt on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford's BlueCruise gains hands-free lane changes and more in update

Ford is sending out an update to BlueCruise that will enhance its functionality with some nice features we tend to enjoy on other advanced driver assistance systems. Plus, in addition to BlueCruise getting the update, the Lincoln version named ActiveGlide will get the same update. For starters, both BlueCruise and ActiveGlide will gain hands-free lane changing. Similar to other lane-change assist systems, you’ll prompt the lane change by activating the turn signal. ItÂ’ll scan for traffic, and if all is clear, the vehicle will move into the requested lane. Ford says that itÂ’ll even suggest lane changes to the driver in the cluster as you approach slower-moving traffic. What this new feature doesnÂ’t do, though, are automatic lane changes. Systems like Super Cruise and TeslaÂ’s Autopilot will recognize slower traffic, then make a pass all on their own to move around said traffic — theyÂ’ll even move back over into your previous lane after making the pass. We wouldnÂ’t be surprised if Ford adds this functionality to the system in a future update. Another update in this release is new “In-Lane Repositioning” programming. ItÂ’s designed to recognize when there are vehicles in adjacent lanes and will then shift you further away from them within your lane of travel. Ford says itÂ’s especially helpful when passing semi-trucks, and will give you the usual and more comfortable buffer that a human driver might give a truck. The final update is a Predictive Speed Assist feature that will adjust your speed as you approach a curve. It will signal to the driver in the cluster that the car will slow for a curve, then do so gradually as you approach it. This is the sort of feature we typically like to turn off as soon as possible, since weÂ’d rather just remain at the same speed for curves on the highway. But, if youÂ’re one of those folks who like to slow down for curves on the highway, this will provide a more natural driving feel. Ford says that customers have cumulatively put over 16 million hands-free miles on cars with BlueCruise at this point. This update, simply named 1.2, for BlueCruise and ActiveGlide will see its initial rollout this fall. It will hit the Mustang Mach-E first, and Ford says other vehicles will follow. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. POV drive of the 2021 Ford Mustang Mach-E

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.