Explorer Sportrac Xlt on 2040-cars

Auto blog

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

Ford picks up new Ranger overseas [w/video+poll]

The new Ford F-150 is lighter and more efficient than the model it replaced, but if it's a smaller Ford pickup that you really wanted, you're going to have to pack your bags. Because while Dearborn stopped selling the Ranger in North America years ago, it still offers one in markets overseas. And it's just rolled out a refreshed model at the 2015 Bangkok Motor Show in Thailand. Following the reveal of the new Everest sport-ute with which it shares its chassis, the refreshed Ranger pickup benefits from revised sheetmetal, powertrain and equipment throughout. The changes are punctuated by a front end with a more rugged-looking grille, a more sculpted hood and projector headlamps. The interior has been updated as well, not only in terms of style but equipment as well, with an eight-inch touchscreen display in the dashboard running Sync 2 and dual TFT displays flanking the speedo in the instrument cluster. Under the hood, buyers will be able to choose between a carryover 2.5-liter inline four with 163 horsepower and 166 pound-feet of torque that's the sole gasoline option or one of two diesel options: a 2.2-liter four now producing 158 hp and 284 lb-ft, or a 3.2-liter inline-five with 197 hp and 347 lb-ft. The diesel engines are more efficient than before with available stop/start engine management, and offer what Ford says is class-leading towing capability. Six-speed automatic or manual gearboxes transmit the power to the road through either the rear wheels or all four. Production will continue in Thailand for the Asia Pacific Market, South Africa for Africa and Europe, and in Argentina for Latin America. All told the new Ranger will be offered in 180 markets, around the world but for better or worse, ours won't be one of them. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.