2001 Ford Excursion Limited Edition Lifted Fabtech Lift Kit 7.3 Diesel!!!!!! on 2040-cars

Auto blog

2020 Chevy Silverado HD vs. 2019 Ram, Ford heavy duty trucks: How they compare on paper

Last year was all about the latest in light-duty full-size pickup trucks, so this year, Ram, Ford and Chevy are launching the heavy-duty variants. The first out of the gate is the redesigned 2019 Ram 2500 and 3500 HD, and Ram dropped all the pertinent specs with the reveal. Chevy followed with the new Silverado HD in Chicago, and Ford revealed updates to the Super Duty at the same show. Ford hasn't released details on output, payload capacity, towing capacity or pricing for the updated Super Duty. As such, we'll be comparing the current Super Duty with the all-new Silverado HD and Ram HD. Both Chevy and Ram have revealed full specs for each of their respective trucks, leaving out only pricing, which we've estimated based on the outgoing models. You can see the raw details in the chart below, followed by extra information and analysis. Some things to keep in mind: These specifications cover all versions of the Ram HD, Silverado HD and Super Duty, such as 2500 and 3500 models, and all the way up to F-450. Specifications can vary widely based on engine, drivetrain, cab and bed configurations, so be sure to take a close look at the specific model you're interested in when you get particularly serious about buying. And of course, be sure to check out our car comparison tool if you'd like to look at other trucks on the market. Engines and drivetrains All three of these trucks offer gasoline and diesel engines, but only the Ram has two versions of the diesel. Starting with gas engines, Ram's 6.4-liter V8 has the power advantage with 25 more horsepower than the next-most-potent Super Duty, but the new Silverado HD's 6.6-liter V8 takes the torque crown at 464 pound-feet, nearly 35 more than the other two gas engines. The Ram is also the only one to pair an eight-speed automatic with the gas engine, whereas the Ford and Chevy make do with a six-speed. With diesel engines, horsepower is a weak point for the Ram. The Ram's entry-level turbo 6.7-liter inline-six is the weakest, as the only one with under 900 pound-feet of torque and under 400 horsepower. Even the high-output version only makes 400 horsepower, while the Chevy makes 445 and the Ford 450. But the tables turn with torque, as the Ram makes a best-in-class 1,000 pound-feet followed by the Ford's 935 and the Chevy's 910. Both the Ram and the current Super Duty diesels each get a six-speed automatic, but the new Silverado HD's diesel gets a 10-speed unit.

Ford's official Euro aftermarket partner Mountune coming to US

Now that we're getting a steady stream of Ford's European offerings, the aftermarket world is finally starting to catch up as well. UK-based aftermarket tuning company, Mountune has just announced that it will be setting up shop in California to provide high-performance and racing parts for Ford vehicles including the Focus ST and Fiesta ST.
Mountune lays claim to being Ford's "official European tuning partner," and US buyers will soon have access to these parts through Ford dealerships and with a Ford Racing warranty. Speaking of Ford Racing, Mountune also says that it will be working with Ford's in-house team to develop future components for both street and track. There are no specifics as of yet for which products will be offered here, but the company plans to launch a US-specific website later this month with more information.

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.