Handicap Van on 2040-cars

Auto blog

Best new convertibles for 2024 and 2025

If you’re here, then youÂ’re already in the right mindset. Convertibles rule, and we have all the best convertibles listed for you further below. Driving around with the top off is an experience you need to live to fall in love with. When the weatherÂ’s right, youÂ’re on a proper bit of road, and the car youÂ’re in is a good one, few automotive experiences can top it. The experience is extra special when you have a musical exhaust note filtering directly into your ears and echoing off the landscape around you. And while rolling the windows down and opening a moonroof can get you part of the way there, it's nothing like feeling the wind wash over you with absolutely no roof overhead. The downsides can be just as harsh as the upsides when youÂ’re in the wrong conditions, though. Convertibles are typically worse to live with in cold climates, and driving around with the top up frequently means you might be subject to more road noise and worse visibility than an equivalent coupe. And when it comes to pure performance, convertibles are inherently compromised from a weight and structural rigidity perspective. All that said, we still think the upsides outweigh the compromises if your number one objective is to simply have fun. ItÂ’s a good thing then that there are a ton of great convertibles for sale these days. And no, the list of possibilities isnÂ’t as long as it used to be. Long-running standbys like the Mercedes-Benz E-Class and C-Class Convertibles are gone (replaced by the one CLE-Class). And so are others like the Audi TT Roadster, Fiat 124 Spider and Nissan Z Roadster. Nevertheless, opportunities abound from the ultra-cheap and fun, to physics-defying supercars and everything else in between. WeÂ’ll give you options for which new convertibles we think are the best below, so read on to find out.   Mazda MX-5 Miata Pros: Lightweight and compact; great engine and transmission combo; one of the most raw and pure driving experiences out thereCons: Not great for tall people; infotainment is dated; tiny trunk Read our Mazda MX-5 Miata Review Miata is always the answer, right? In this case, that rings even more true than usual. In fact, you could stop reading this list right here and go buy a Miata and youÂ’d likely be just as happy driving it around as you would be in any of the more expensive offerings that follow. ThatÂ’s just the magic of the MX-5.

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video:

Ford delays North American production restart from coronavirus lockdown

Ford said on Tuesday it was postponing its plan to restart production at its North American plants due to safety concerns for its workers amid the coronavirus pandemic. To generate cash, the No. 2 U.S. automaker had said last week it was poised to restart production at some plants in North America as early as April 6, bringing back such profitable vehicles as its top-selling F-150 full-sized pickup, the Transit commercial van and SUVs. But on Tuesday, Ford said it had been aiming to resume production at several key U.S. plants on April 14, but would now instead do so at dates it would announce later on. "The health and safety of our workforce, dealers, customers, partners and communities remains our highest priority," Kumar Galhotra, president of Ford's North American operations, said in a statement. Still, the automaker will open a plant in Ypsilanti, Michigan, during the week of April 20, that will make ventilators to treat patients afflicted by the coronavirus. Rival Fiat Chrysler Automobiles said last week it plans to resume production in North America on April 13. General Motors has shuttered its plants indefinitely and has not provided a date for vehicle production to restart. It is facing a delay in the production launch of its redesigned large SUVs and is delaying work on other SUVs. "Once it is safe to resume production, we will do so," a GM spokesman said. As of Monday, Volkswagen was shooting for an April 5 reopening at its Tennessee plant. Honda, Nissan and Subaru facilities in North America will remain closed through April 6, and Hyundai through April 10. Toyota was planning to reopen its North American plants April 17. Plants/Manufacturing Chrysler Fiat Ford GM coronavirus