1998 Ford E-350 Van 270,000 Miles (70,000 On New Engine) on 2040-cars

Auto blog

2015 Hennessey Ford Mustang hits 207.9 mph

After hitting over 195 miles per hour a few months ago, John Hennessey was barely out of his personal HPE700 Mustang before he said that 200 mph was achievable. Don't doubt a man who knows a ton about taking cars to insane speeds. With the new HPE750 Mustang, he and his customers can finally surpass the 200-mph mark in their cars. "If at first you don't succeed, just add more horsepower and rpm and try again," Hennessey said in the company's announcement. Rather than the 717 horsepower and 632 pound-feet of torque from the supercharged 5.0-liter V8 in the HPE700, the HPE750 ratchets the same powertrain up to an even more potent 774 hp and 648 lb-ft. In a real show of confidence, the Hennessey team brought along Jay Leno when it returned to the Continental Tire Proving Grounds in Uvalde, TX, to set a new top speed with the HPE750. The upgrades to the Mustang definitely paid off because the pony car reached a GPS-verified 207.9 miles per hour down the straight. The run will eventually appear on a segment on the upcoming Jay Leno's Garage TV show that will air CNBC. Prices for the HPE750 start at $59,500 USD, including the base 2015 Mustang GT, but building an exact replica of this one would cost $69,374, according to Hennessey. In addition to the huge top speed, the company claims that the coupe can reach 60 mph in 3.4 seconds and cover the quarter mile in 10.9 seconds. 774 HP Hennessey Mustang Tested to 207.9 mph Jay Leno visits Texas tuner for upcoming TV series on CNBC June 2, 2015 Uvalde, Texas—On Wednesday, May 27, 2015, professional driver, Brian Smith, drove the Hennessey HPE750 Supercharged Mustang to a top speed of 207.9 mph. In the process, Hennessey's potent pony car became the first 2015 Mustang to break the 200 mph mark. Jay Leno was on hand to witness the record speed while filming an upcoming episode of Jay Leno's Garage, which will air on CNBC later this year. The run was made on the 8.5 mile high speed oval at the Continental Tire Proving Grounds located in Uvalde, Texas – the same test track where John Hennessey test drove the company's HPE700 Mustang to a top speed of 195 mph back in February of this year. During both tests, speeds were validated with Racelogic's VBox 3i GPS data logging system. "If at first you don't succeed, just add more horsepower and rpm and try again," said company founder and president, John Hennessey.

All eyes on Detroit as automakers prepare for slow, careful reopening of plants

DETROIT — The U.S. factories that make Fords, Chevys and Jeeps are coming back to life this week as workers install new safety equipment and wake up machines ahead of the high-stakes restart the Detroit automakers plan to launch on Monday. Ford, General Motors and Fiat Chrysler Automobiles all plan to reopen North American factories on May 18. The reopening of the U.S. auto sector will be a closely watched test of whether workers across a range of industries can return to factories in large numbers without a resurgence of COVID-19 infections. How well the automakers do will be significant for the U.S. economy, as nearly 1 million workers are employed in the sector. Executives at Ford and GM said separately this week the companies have not recorded any cases of COVID-19 transmission in plants outside the United States since adopting new safety protocols. Those procedures include mandatory face masks, separation of workers on assembly lines, frequent cleaning of work areas and requirements that workers pass through temperature monitors and report any symptoms before entering a plant. The Detroit Three have taken unprecedented steps to share information about coronavirus safety practices and develop a common set of workplace standards for their restarts, working with the United Auto Workers union, executives said. "We thought it was critical that we did it together," Ford manufacturing and labor chief Gary Johnson told Reuters. "We've never done this as an industry." The Detroit automakers will restart U.S. plants without regular testing of workers, because they do not have access to sufficient testing capacity, executives and UAW officials said. They will test workers who report COVID-19 symptoms or have fevers discovered by temperature scanners installed at factory entrances. "We have to continue to push for this testing," United Auto Workers union Vice President Cindy Estrada told Reuters on Wednesday. "Unless we have testing weekly to keep sick people out of the plant there is always a risk." Adopting new safety practices is just part of the work the companies must do to reopen after an extraordinary shutdown that has lasted two months.   Wave zero At Ford, workers going in to ready factories are part of what Chief Operating Officer Jim Farley calls "wave zero." The work of wave zero employees "is really important for success of the startup," he said in an interview.

Ford confirms 1.5-liter EcoBoost four-cylinder engine for 2014 Fusion

Earlier this week, reports were swirling 'round the internet about the 2014 Ford Fusion getting a new 1.5-liter three-cylinder EcoBoost engine. That was... half correct. Ford today confirmed that the 2014 Fusion is, in fact, getting a new 1.5-liter EcoBoost mill, but it has four cylinders, not three.
The new 1.5-liter engine will be the fifth EcoBoost powerplant from Ford Motor Company. Initially to be built at the automaker's Craiova, Romania plant, it will also be offered in the Fusion's twin, the Mondeo, in other markets. This engine will debut at the Shanghai Motor Show next month, and the 1.5-liter is of particular importance in the Chinese market - there is significant tax relief in the People's Republic for vehicles powered by engines with a capacity of 1.5 liters or less.
At a media briefing Thursday, Ford declined to divulge exact power or fuel economy numbers, though Joe Bakaj, vice president of powertrain engineering, told Autoblog that power output should be similar to that of the current 1.6-liter inline-four, and that overall efficiency will be "better than the 1.6." Our earlier report stated that the 1.5-liter four will produce 177 horsepower and 177 pound-feet of torque - losses of 1 hp and 7 lb-ft versus the 1.6-liter engine. Ford states that the 1.5-liter four will feature many of the same technologies used on the company's 1.0-liter EcoBoost inline-three, including an integrated exhaust manifold that recaptures much of the engine's heat.